Variability of CPT and tropopause characteristics over the Arabian Peninsula

. The climatology of the cold-point tropopause (CPT) and tropopause characteristics in a subtropical area like The Arabian Peninsula is examined using the radiosonde data of the CPT characteristics and NCEP Reanalysis data of the tropopause characteristics. The monthly mean data for January and July are analyzed for three stations, namely Medina, Tabuk and Dammam in Saudi Arabia. The trends of CPT and tropopause characteristics of pressure, height, temperature, temperature anomalies, relative humidity, wind speed and potential temperature are also analyzed. The trends of these characteristics show that they experienced a sharp change during the 1990s and a significant change for the period from 2000 to 2016. For the whole period of study, the month of July, CPT and tropopause pressure decreased for about 5 hPa, whereas the height increased for more than 100 m. The temperature experienced a sudden drop during the beginning of the 1990s and a smooth decrease during the following years in January. Furthermore, a strong correlation is found between the CPT temperature and the Solar Cycle during the ‘90s period then it decreased sharply after this period.

Water masses distribution offshore the Sabrina Coast (East Antarctica)

Current glacier melt rates in West Antarctica substantially exceed those around the East Antarctic margin. The exception is Wilkes Land, where for example Totten Glacier underwent significant retreat between 2000 and 2012, underlining its sensitivity to climate change. This process is strongly influenced by ocean dynamics, which in turn changes in accordance with the evolution of the ice caps. Here, we present new oceanographic data (temperature, salinity, and dissolved oxygen) collected during austral summer 2017 offshore the Sabrina Coast (East Antarctica) from the continental shelf break to ca 3000 m depth. This area is characterized by very few oceanographic in situ observations. The main water masses of the study area, identified by analysing thermohaline properties, are the Antarctic Surface Water with potential temperature θ>-1.5 ∘C and salinity S<34.2 (σθ<27.55 kg m−3), the Winter Water with -1.92<θ<-1.75 ∘C and 34.0<S<34.5 (potential density, 27.55<σθ<27.7 kg m−3), the modified Circumpolar Deep Water with θ>0 ∘C and S>34.5 (σθ>27.7 kg m−3), and Antarctic Bottom Water with -0.50<θ<0 ∘C and 34.63<S<34.67 (27.83<σθ<27.85; neutral density γn>28.30 kg m−3). The latter is a mixture of dense waters from the Ross Sea and Adélie Land continental shelves. Such waters are influenced by the mixing processes they undergo as they move westward along the Antarctic margin, also interacting with the warmer Circumpolar Deep Water. The spatial distribution of water masses offshore the Sabrina Coast also appears to be strongly linked with the complex morpho-bathymetry of the slope and rise area, supporting the hypothesis that downslope processes contribute to shaping the architecture of the distal portion of the continental margin. Oceanographic data presented here can be downloaded from https://doi.org/10.25919/yyex-t381 (CSIRO; Van Graas, 2021).

USING THE UNIVERSITY'S ENERGY EFFICIENCY KNOWLEDGE HUB FOR ENERGY RENOVATION AND ENERGY MODERNIZATION OF UNIVERSITY BUILDINGS

BACKGROUND AND OBJECTIVES. The most important socio-economic task in the current period is to transfer Ukraine's economy to an intensive way of development in order to improve the level and quality of life of the population and solve the full range of social problems. Implementation of such a policy dictates the need to solve problems of reconstruction and modernization of buildings and structures, primarily related to the public sphere (including higher education institutions), in order to eliminate the existing inconsistency of the technical condition and functional and consumer qualities of public buildings to current standards and consumer requirements. Therefore, one of the most urgent directions of development of higher educational institutions is the task of providing effective overhaul and reconstruction of buildings, increasing their energy efficiency.METHODS. The theoretical and methodological basis of the study were the fundamental and applied developments of leading domestic and foreign scientists in the theory and practice of management of energy modernization and energy reconstruction of buildings, increasing energy efficiency of buildings. The factual basis of research were the legislative acts of Ukraine in the field of energy efficiency, normative and methodical documents on the modernization and reconstruction of buildings, Directive 2010/31/EC in the field of energy saving. When solving specific tasks the methods of system and comparative analysis, economic-mathematical methods of efficiency evaluation of energy reconstruction and energy modernization projects were used.FINDINGS. The method of calculation of the reduced resistance to heat transfer of the enclosing structures and the shell of the 4th building of Kyiv National University of Technology and Design as a whole taking into account the temperature and humidity conditions in the fencing marginal zones. It is shown that in the enclosure edge zones the heat protective properties decrease resulting in a deterioration of the heat protection of the whole building. Practical recommendations for the design of fencing structures of modern buildings taking into account the temperature-moisture regime are proposed.CONCLUSION. For the analysis of complex processes of moisture transfer in enclosures, a mathematical model based on the moisture potential is most convenient. A certain difference from the thermal potential (temperature) to the definition of the moisture potential allows to diagnose the most general assessment of the moisture regime of exterior and interior fences on the basis of HUB knowledge on energy efficiency. At use of this model it is possible to consider process of moisture exchange in a wide range of humidity and temperature taking into account movement of a moisture as a basis of carrying out energy reconstruction and energy modernization of operating buildings of the university.

Indian Ocean Subtropical Underwater and the Interannual Variability in its Annual Subduction Rate Associated with the Southern Annular Mode

In this study, the Indian Ocean subtropical underwater (IOSTUW) was investigated as a subsurface salinity maximum using Argo floats (2000–2020) for the first time. It has mean salinity, potential temperature and potential density values of 35.54 ± 0.29 psu, 17.91 ± 1.66 °C, and 25.56 ± 0.35 kg m−3, respectively, and mainly extends between 10°S and 30°S along the isopycnal surface in the subtropical south Indian Ocean. The annual subduction rate of the IOSTUW during the period of 2004-2019 was investigated based on a gridded Argo dataset. The results revealed a mean value of 4.39 Sv (1 Sv=106 m3s−1) with an interannual variability that is closely related to the Southern Annular Mode (SAM). The variation in the annual subduction rate of the IOSTUW is dominated by the lateral induction term, which largely depends on the winter mixed layer depth (MLD) in the sea surface salinity (SSS) maximum region. The anomalies of winter MLD is primarily determined by SAM-related air-sea heat flux and zonal wind anomalies through modulation of the buoyancy. As a result, the annual subduction rate of the IOSTUW generally increased when the SAM index showed negative anomalies and decreased when the SAM index showed positive anomalies. Exceptional cases occurred when the wind anomaly within the SSS maximum region was weak or was dominated by its meridional component.

Wearable Device for Observation of Physical Activity with the Purpose of Patient Monitoring Due to COVID-19

In late 2019, a new genre of coronavirus (COVID-19) was first identified in humans in Wuhan, China. In addition to this, COVID-19 spreads through droplets, so quarantine is necessary to halt the spread and to recover physically. This modern urgency creates a critical challenge for the latest technologies to detect and monitor potential patients of this new disease. In this vein, the Internet of Things (IoT) contributes to solving such problems. This paper proposed a wearable device that utilizes real-time monitoring to detect body temperature and ambient conditions. Moreover, the system automatically alerts the concerned person using this device. The alert is transmitted when the body exceeds the allowed temperature threshold. To achieve this, we developed an algorithm that detects physical exercise named “Continuous Displacement Algorithm” based on an accelerometer to see whether a potential temperature rise can be attributed to physical activity. The people responsible for the person in quarantine can then connect via nRF Connect or a similar central application to acquire an accurate picture of the person’s condition. This experiment included an Arduino Nano BLE 33 Sense which contains several other sensors like a 9-axis IMU, several types of temperature, and ambient and other sensors equipped. This device successfully managed to measure wrist temperature at all states, ranging from 32 °C initially to 39 °C, providing better battery autonomy than other similar devices, lasting over 12 h, with fast charging capabilities (500 mA), and utilizing the BLE 5.0 protocol for data wireless data transmission and low power consumption. Furthermore, a 1D Convolutional Neural Network (CNN) was employed to classify whether the user is feverish while considering the physical activity status. The results obtained from the 1D CNN illustrated the manner in which it can be leveraged to acquire insight regarding the health of the users in the setting of the COVID-19 pandemic.

Experimental evidence on the origin of Ca-rich carbonated melts formed by interaction between sedimentary limestones and mantle-derived ultrabasic magmas

In this experimental study, we documented the formation of strongly ultrabasic and ultracalcic melts through the interaction of melilititic and basanitic melts with calcite. Three strongly to moderately SiO2-undersaturated volcanic rocks from the Bohemian Massif (central Europe) were mixed with 10, 30, and 50 wt% CaCO3 and melted at 1100, 1200, and 1300 °C at 2 kbar to evaluate the maximum amount of carbonate that can be assimilated by natural ultrabasic melts at shallow depths. Experiments revealed a surprisingly complete dissolution of the CaCO3, only rarely reaching carbonate saturation, with typical liquidus phases represented by olivine, spinel, melilite, and clinopyroxene. Only in the runs with the most SiO2-undersaturated compositions did abundant monticellite form instead of clinopyroxene. For all starting mixtures, strongly ultrabasic (SiO2 down to 15.6 wt%), lime-rich (CaO up to 43.6 wt%), ultracalcic (CaO/Al2O3 up to ~27) melt compositions were produced at 1200 and 1300 °C, with up to ~25 wt% dissolved CO2. When present, quenched olivine showed much higher forsterite content (Fo95–97) than olivine in the natural samples (Fo79–85). The two major results of this study are (1) silicate-carbonatite melt compositions do not necessarily imply the existence of carbonatitic components in the mantle, because they are also produced during limestone assimilation, and (2) Fo-rich olivines cannot be used to infer any primitive character of the melt nor high potential temperature (Tp).

The unusually long cold spell and the snowstorm Filomena in Spain in January 2021

In early January 2021, Spain was affected by two extreme events – an unusually long cold spell and a heavy snowfall event associated with extratropical cyclone Filomena. For example, up to 50 cm of snow fell in Madrid and the surrounding areas in 4 days. Already during 9 days prior to the snowfall event, anomalously cold temperatures at 850 hPa and night frosts prevailed over large parts of Spain. During this period, anomalously cold and dry air was transported towards Spain from central Europe and even from the Barents Sea. The storm Filomena, which was responsible for major parts of the snowfall event, developed from a precursor low-pressure system over the central North Atlantic. Filomena intensified due to interaction with an upper-level potential vorticity (PV) trough, which was the result of anticyclonic wave breaking over Europe. In turn, this wave breaking was related to an intense surface anticyclone and upper-level ridge, whose formation was strongly influenced by a warm conveyor belt outflow of a cyclone off the coast of Newfoundland. The most intense snowfall occurred on 09 January and was associated with a sharp air mass boundary with an equivalent potential temperature difference at 850 hPa across Spain exceeding 20 K. Overall, the combination of pre-existing cold surface temperatures, the optimal position of the air mass boundary, and the dynamical forcing for ascent induced by Filomena and its associated upper-level trough were all essential – and in parts physically independent – ingredients for this extreme snowfall event to occur.

Testing the efficacy of atmospheric boundary layer height detection algorithms using uncrewed aircraft system data from MOSAiC

During the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition, meteorological conditions over the lowest 1 km of the atmosphere were sampled with the DataHawk2 (DH2) fixed wing uncrewed aircraft system (UAS). Of particular interest is the atmospheric boundary layer (ABL) height, as ABL structure can be closely coupled to cloud properties, surface fluxes, and the atmospheric radiation budget. The high temporal resolution of the UAS observations allows us to subjectively identify ABL height for 65 out of the total 89 flights conducted over the central Arctic Ocean between 23 March and 26 July 2020 by visually analyzing profiles of virtual potential temperature, humidity, and bulk Richardson number. Comparing this subjective ABL height with the ABL heights identified by various previously published objective methods allows us to determine which objective methods are most successful at accurately identifying ABL height in the central Arctic environment. The objective methods we use are the Liu-Liang, Heffter, virtual potential temperature gradient maximum, and bulk Richardson number methods. In the process of testing these objective methods on the DH2 data, numerical thresholds were adapted to work best for the UAS-based sampling. To determine if conclusions are robust across different measurement platforms, the subjective and objective ABL height determination processes were repeated using the radiosonde profile closest in time to each DH2 flight. For both the DH2 and radiosonde data, it is determined that the bulk Richardson number method is the most successful at identifying ABL height, while the Liu-Liang method is least successful.

QG-DL-Ekman: Dynamics of a diabatic layer in the quasi-geostrophic framework

Quasi-geostrophic (QG) theory describes the dynamics of synoptic scale flows in the troposphere that are balanced with respect to both acoustic and internal gravity waves. Within this framework, effects of (turbulent) friction near the ground are usually represented by Ekman Layer theory. The troposphere covers roughly the lowest ten kilometers of the atmosphere while Ekman layer heights are typically just a few hundred meters. However, this two-layer asymptotic theory does not explicitly account for substantial changes of the potential temperature stratification due to diabatic heating associated with cloud formation or with radiative and turbulent heat fluxes which can be significant in about the lowest three kilometers and in the middle latitudes. To address this deficiency, this paper extends the classical QG–Ekman layer model by introducing an intermediate dynamically and thermodynamically active layer, called the “diabatic layer” (DL) from here on. The flow in this layer is also in acoustic, hydrostatic, and geostrophic balance but, in contrast to QG flow, variations of potential temperature are not restricted to small deviations from a stable and time independent background stratification. Instead, within the DL diabatic processes are allowed to affect the leading-order stratification. As a consequence, this layer modifies the pressure field at the top of the Ekman layer, and with it the intensity of Ekman pumping seen by the quasi-geostrophic bulk flow. The result is the proposed extended quasi-geostrophic three-layer QG-DL-Ekman model for mid-latitude dynamics.

Towards a transient gravity wave parametrization in atmospheric models

&lt;p&gt;Subgrid-scale internal gravity waves (IGWs) are important distributors of energy in a stratified atmosphere. While they are mostly excited at lower altitudes their effects are most important between the upper troposphere to the mesopause (~85km). During propagation&amp;#8211;both in the vertical and the horizontal&amp;#8211;nonlinear IGWs can exert a wave drag on the mean winds, interact with the mean potential temperature, and mix atmospheric tracers such as aerosols or greenhouse gases.&lt;/p&gt; &lt;p&gt;In state-of-the art weather prediction models IGWs are typically parametrized using the single-column and the steady-state assumptions. These parametrizations take into account dissipative effects of IGWs but neglect their horizontal propagation and all of their transient interaction mechanisms such as direct wave-mean-flow interactions. However, the latter have been shown to contribute to IGW dynamics in various idealized studies.&lt;/p&gt; &lt;p&gt;Here we present advances of the use of the transient Multi Scale Gravity Wave Model (MS-GWaM) in the upper atmosphere model UA-ICON. Based on Lagrangian ray-tracing the parametrization includes various non-orographic wave sources, transient propagation in both the horizontal and vertical directions, direct wave-mean-flow interactions and wave breaking. The resulting setup satisfactorily reproduces the observed mean-wind and potential temperature climatology and already shows promising insights into the details of the role of IGWs in the atmosphere.&lt;/p&gt;