scholarly journals Source Apportionment of Urban Particulate Matter using Hourly Resolved Trace Metals, Organics, and Inorganic Aerosol Components

2016 ◽  
Author(s):  
Cheol-Heon Jeong ◽  
Jon M. Wang ◽  
Greg J. Evans
Keyword(s):  
Trace Metals ◽  
Black Carbon ◽  
Biomass Burning ◽  
Mass Spectra ◽  
Road Dust ◽  
Organic Aerosol ◽  
High Time Resolution ◽  
Organic Mass ◽  
Related Factors ◽  
Inorganic Species

Abstract. Source apportionment analysis of hourly resolved particulate matter (PM) speciation data was performed using positive matrix factorization (PMF). The data were measured at an urban site in downtown Toronto, Canada during two campaign periods (April–July, 2013; November, 2013–February, 2014), and included trace metals, black carbon, and mass spectra for organic and inorganic species (PMFFull). The chemical composition was measured by collocated high time resolution instrumentation, including an Aerosol Chemical Speciation Monitor, an Xact metals monitor, and a seven-wavelength Aethalometer. Separate PMF analyses were conducted using the trace metal only data (PMFmetal) and organic mass spectra only (PMForg), and compared with the PMFFull results. Comparison of these three PMF analyses demonstrated that the full analysis offered many advantages in the apportionment of local and regional sources compared to using the organic or metals data individually. In combining the high time resolution data, this analysis enabled i) the quantification of metal-rich sources of PM2.5 (PM < 2.5 μm), ii) the resolution of more robust factor profiles and contributions, and iii) the identification of additional organic aerosol sources. Nine factors were identified through the PMFFull analysis: five local factors (i.e. Road Dust, Primary Vehicle Emissions, Tire Wear, Cooking, and Industrial Sector) and four regional factors (i.e. Biomass Burning, Oxidised Organics, Sulphate and Oxidised Organics, and Nitrate and Oxidised Organics). The majority of the metal emissions (83 %) and almost half of the black carbon (49 %) were associated with the three traffic-related factors which, on average, contributed a minority (17 %) of the overall PM2.5 mass. Strong seasonal patterns were observed for the traffic-related emissions: higher contributions of resuspended road dust in spring vs. a winter high for tire wear related emissions. Biomass Burning contributed the majority of the PM2.5 mass (52 %) in June and July due to a major forest fire event. Much of this mass was due to photochemical aging of the biomass burning aerosol. On average, industrially related factors contributed almost half (49 %) of the PM2.5; most of this mass was secondary aerosol species. Nitrate coupled with highly oxidised organics was the largest contributor, accounting for 30 % of PM2.5 on average, with higher levels in winter and at night. Including the temporal variabilities of inorganic ions and trace metals in the PMFFull analysis provided additional structure to subdivide the low volatility oxidised organic aerosol into three sources. Resuspended road dust was identified as a potential source of aged organic aerosol. The novelty of this study is the application of PMF receptor modeling to hourly resolved trace metals in conjunction with organic mass spectra, inorganic species, and black carbon for different seasons, and the comparison of separate PMF analyses applied to metals or organics alone. The inclusion of these different types of hourly data allowed more robust apportionment of PM sources, as compared to analysing organic or metals data individually.

scholarly journals Enhancing non-refractory aerosol apportionment from an urban industrial site through receptor modeling of complete high time-resolution aerosol mass spectra

2014 ◽  
Vol 14 (15) ◽  
pp. 8017-8042 ◽  
Author(s):  
M. L. McGuire ◽  
R. Y.-W. Chang ◽  
J. G. Slowik ◽  
C.-H. Jeong ◽  
R. M. Healy ◽  
...  
Keyword(s):  
Mass Spectrum ◽  
Mass Spectra ◽  
Organic Aerosol ◽  
Mass Resolution ◽  
Receptor Modeling ◽  
Unit Mass ◽  
Organic Mass ◽  
Aerosol Mass ◽  
Inorganic Species ◽  
Unit Mass Resolution

Abstract. Receptor modeling was performed on quadrupole unit mass resolution aerosol mass spectrometer (Q-AMS) sub-micron particulate matter (PM) chemical speciation measurements from Windsor, Ontario, an industrial city situated across the Detroit River from Detroit, Michigan. Aerosol and trace gas measurements were collected on board Environment Canada's Canadian Regional and Urban Investigation System for Environmental Research (CRUISER) mobile laboratory. Positive matrix factorization (PMF) was performed on the AMS full particle-phase mass spectrum (PMFFull MS) encompassing both organic and inorganic components. This approach compared to the more common method of analyzing only the organic mass spectra (PMFOrg MS). PMF of the full mass spectrum revealed that variability in the non-refractory sub-micron aerosol concentration and composition was best explained by six factors: an amine-containing factor (Amine); an ammonium sulfate- and oxygenated organic aerosol-containing factor (Sulfate-OA); an ammonium nitrate- and oxygenated organic aerosol-containing factor (Nitrate-OA); an ammonium chloride-containing factor (Chloride); a hydrocarbon-like organic aerosol (HOA) factor; and a moderately oxygenated organic aerosol factor (OOA). PMF of the organic mass spectrum revealed three factors of similar composition to some of those revealed through PMFFull MS: Amine, HOA and OOA. Including both the inorganic and organic mass proved to be a beneficial approach to analyzing the unit mass resolution AMS data for several reasons. First, it provided a method for potentially calculating more accurate sub-micron PM mass concentrations, particularly when unusual factors are present, in this case the Amine factor. As this method does not rely on a priori knowledge of chemical species, it circumvents the need for any adjustments to the traditional AMS species fragmentation patterns to account for atypical species, and can thus lead to more complete factor profiles. It is expected that this method would be even more useful for HR–ToF–AMS data, due to the ability to understand better the chemical nature of atypical factors from high-resolution mass spectra. Second, utilizing PMF to extract factors containing inorganic species allowed for the determination of the extent of neutralization, which could have implications for aerosol parameterization. Third, subtler differences in organic aerosol components were resolved through the incorporation of inorganic mass into the PMF matrix. The additional temporal features provided by the inorganic aerosol components allowed for the resolution of more types of oxygenated organic aerosol than could be reliably resolved from PMF of organics alone. Comparison of findings from the PMFFull MS and PMFOrg MS methods showed that for the Windsor airshed, the PMFFull MS method enabled additional conclusions to be drawn in terms of aerosol sources and chemical processes. While performing PMFOrg MS can provide important distinctions between types of organic aerosol, it is shown that including inorganic species in the PMF analysis can permit further apportionment of organics for unit mass resolution AMS mass spectra.

scholarly journals Enhancing non-refractory aerosol apportionment from an urban industrial site through receptor modelling of complete high time-resolution aerosol mass spectra

2014 ◽  
Vol 14 (4) ◽  
pp. 5081-5145 ◽  
Author(s):  
M. L. McGuire ◽  
R. Y.-W. Chang ◽  
J. G. Slowik ◽  
C.-H. Jeong ◽  
R. M. Healy ◽  
...  
Keyword(s):  
Mass Spectrum ◽  
Mass Spectra ◽  
Organic Aerosol ◽  
Mass Resolution ◽  
Unit Mass ◽  
Organic Mass ◽  
Aerosol Mass ◽  
Receptor Modelling ◽  
Inorganic Species ◽  
Unit Mass Resolution

Abstract. Receptor modelling was performed on quadrupole unit mass resolution aerosol mass spectrometer (Q-AMS) sub-micron particulate matter (PM) chemical speciation measurements from Windsor, Ontario, an industrial city situated across the Detroit River from Detroit, Michigan. Aerosol and trace gas measurements were collected on board Environment Canada's CRUISER mobile laboratory. Positive matrix factorization (PMF) was performed on the AMS full particle-phase mass spectrum (PMFFull MS) encompassing both organic and inorganic components. This approach was compared to the more common method of analysing only the organic mass spectra (PMFOrg MS). PMF of the full mass spectrum revealed that variability in the non-refractory sub-micron aerosol concentration and composition was best explained by six factors: an amine-containing factor (Amine); an ammonium sulphate and oxygenated organic aerosol containing factor (Sulphate-OA); an ammonium nitrate and oxygenated organic aerosol containing factor (Nitrate-OA); an ammonium chloride containing factor (Chloride); a hydrocarbon-like organic aerosol (HOA) factor; and a moderately oxygenated organic aerosol factor (OOA). PMF of the organic mass spectrum revealed three factors of similar composition to some of those revealed through PMFFull MS: Amine, HOA and OOA. Including both the inorganic and organic mass proved to be a beneficial approach to analysing the unit mass resolution AMS data for several reasons. First, it provided a method for potentially calculating more accurate sub-micron PM mass concentrations, particularly when unusual factors are present, in this case, an Amine factor. As this method does not rely on a priori knowledge of chemical species, it circumvents the need for any adjustments to the traditional AMS species fragmentation patterns to account for atypical species, and can thus lead to more complete factor profiles. It is expected that this method would be even more useful for HR-ToF-AMS data, due to the ability to better understand the chemical nature of atypical factors from high resolution mass spectra. Second, utilizing PMF to extract factors containing inorganic species allowed for the determination of extent of neutralization, which could have implications for aerosol parameterization. Third, subtler differences in organic aerosol components were resolved through the incorporation of inorganic mass into the PMF matrix. The additional temporal features provided by the inorganic aerosol components allowed for the resolution of more types of oxygenated organic aerosol than could be reliably resolved from PMF of organics alone. Comparison of findings from the PMFFull MS and PMFOrg MS methods showed that for the Windsor airshed, the PMFFull MS method enabled additional conclusions to be drawn in terms of aerosol sources and chemical processes. While performing PMFOrg MS can provide important distinctions between types of organic aerosol, it is shown that including inorganic species in the PMF analysis can permit further apportionment of organics for unit mass resolution AMS mass spectra.

scholarly journals Characterization of high-resolution aerosol mass spectra of primary organic aerosol emissions from Chinese cooking and biomass burning

2010 ◽  
Vol 10 (9) ◽  
pp. 21237-21257 ◽  
Author(s):  
L.-Y. He ◽  
Y. Lin ◽  
X.-F. Huang ◽  
S. Guo ◽  
L. Xue ◽  
...  
Keyword(s):  
Factor Analysis ◽  
High Resolution ◽  
Biomass Burning ◽  
Mass Spectra ◽  
Organic Aerosol ◽  
Primary Sources ◽  
High Time Resolution ◽  
High Similarity ◽  
Aerosol Mass ◽  
Chinese Cooking

Abstract. Aerosol Mass Spectrometer (AMS) has proved to be a powerful tool to measure submicron particulate composition with high time resolution. Factor analysis of mass spectra (MS) collected worldwide by AMS demonstrates that submicron organic aerosol (OA) is usually composed of several major components, such as oxygenated (OOA), hydrocarbon-like (HOA), biomass burning (BBOA), and other primary OA. In order to help interpretation of component MS from factor analysis of ambient OA datasets, AMS measurement of different primary sources is required for comparison. Such work, however, has been very scarce in the literature, especially for high resolution MS (HR-MS) measurement, which performs improved characterization by separating the ions of different elemental compositions at each m/z in comparison with unit mass resolution MS (UMR-MS) measurement. In this study, primary emissions from four types of Chinese cooking (CC) and six types of biomass burning (BB) were simulated systemically and measured using an Aerodyne High-Resolution Time-of-Flight AMS (HR-ToF-AMS). The MS of the CC emissions show high similarity with m/z 41 and m/z 55 being the highest signals; the MS of the BB emissions also show high similarity with m/z 29 and m/z 43 being the highest signals. The MS difference between the CC and BB emissions is much bigger than that between different CC (or BB) types, especially for the HR-MS. The O/C ratio of OA ranges from 0.08 to 0.13 for the CC emissions while from 0.18 to 0.26 for the BB emissions. The ions of m/z 43, m/z 44, m/z 57, and m/z 60, usually used as tracer ions in AMS measurement, were examined for their HR-MS characteristics in the CC and BB emissions. Moreover, the MS of the CC and BB emissions are also used to compare with component MS from factor analysis of ambient OA datasets observed in China, as well as with other AMS measurements of primary sources in the literature. The MS signatures of cooking and biomass burning emissions revealed in this study can be used as important reference in factor analysis of ambient OA datasets, especially for the relevant studies in East Asia.

scholarly journals Characterization of high-resolution aerosol mass spectra of primary organic aerosol emissions from Chinese cooking and biomass burning

2010 ◽  
Vol 10 (23) ◽  
pp. 11535-11543 ◽  
Author(s):  
L.-Y. He ◽  
Y. Lin ◽  
X.-F. Huang ◽  
S. Guo ◽  
L. Xue ◽  
...  
Keyword(s):  
Factor Analysis ◽  
High Resolution ◽  
Biomass Burning ◽  
Mass Spectra ◽  
Organic Aerosol ◽  
Primary Sources ◽  
High Time Resolution ◽  
High Similarity ◽  
Aerosol Mass ◽  
Chinese Cooking

Abstract. Aerosol mass spectrometry has proved to be a powerful tool to measure submicron particulate composition with high time resolution. Factor analysis of mass spectra (MS) collected worldwide by aerosol mass spectrometer (AMS) demonstrates that submicron organic aerosol (OA) is usually composed of several major components, such as oxygenated (OOA), hydrocarbon-like (HOA), biomass burning (BBOA), and other primary OA. In order to help interpretation of component MS from factor analysis of ambient OA datasets, AMS measurements of different primary sources is required for comparison. Such work, however, has been very scarce in the literature, especially for high resolution MS (HR-MS) measurements, which performs improved characterization by separating the ions of different elemental composition at each m/z in comparison with unit mass resolution MS (UMR-MS) measurements. In this study, primary emissions from four types of Chinese cooking (CC) and six types of biomass burning (BB) were simulated systematically and measured using an Aerodyne High-Resolution Time-of-Flight AMS (HR-ToF-AMS). The MS of the CC emissions show high similarity, with m/z 41 and m/z 55 being the highest signals; the MS of the BB emissions also show high similarity, with m/z 29 and m/z 43 being the highest signals. The MS difference between the CC and BB emissions is much bigger than that between different CC (or BB) types, especially for the HR-MS. The O/C ratio of OA ranges from 0.08 to 0.13 for the CC emissions and from 0.18 to 0.26 for the BB emissions. The UMR ions of m/z 43, m/z 44, m/z 57, and m/z 60, usually used as tracers in AMS measurements, were examined for their HR-MS characteristics in the CC and BB emissions. In addition, the MS of the CC and BB emissions are also compared with component MS from factor analysis of ambient OA datasets observed in China, as well as with other AMS measurements of primary sources in the literature. The MS signatures of cooking and biomass burning emissions revealed in this study can be used as important reference for factor analysis of ambient OA datasets, especially for the relevant studies in East Asia.

Night-time chemistry of biomass burning plumes in urban areas: A dual mobile chamber study

2021 ◽  
Author(s):  
Spiro Jorga ◽  
Kalliopi Florou ◽  
Christos Kaltsonoudis ◽  
John Kodros ◽  
Christina Vasilakopoulou ◽  
...  
Keyword(s):  
Biomass Burning ◽  
Urban Areas ◽  
Mass Spectra ◽  
Prescribed Burning ◽  
Organic Aerosol ◽  
Photochemical Activity ◽  
Organic Nitrate ◽  
Night Time ◽  
Starting Point ◽  
High Concentrations

&lt;p&gt;Biomass burning including residential heating, agricultural fires, prescribed burning, and wildfires is a major source of gaseous and particulate pollutants in the atmosphere. Although, important changes in the size distributions and the chemical composition of the biomass burning aerosol during daytime chemistry have been observed, the corresponding changes at nighttime or in winter where photochemistry is slow, have received relatively little attention. In this study, we tested the hypothesis that nightime chemistry in biomass burning plumes can be rapid in urban areas using a dual smog chamber system.&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;&lt;p&gt;Ambient urban air during winter nighttime periods with high concentrations of ambient biomass burning organic aerosol is used as the starting point. Ozone was added in the perturbed chamber to simulate mixing with background air (and subsequent NO&lt;sub&gt;3&lt;/sub&gt; production and aging) while the second chamber was used as a reference. Following the injection of ozone rapid organic aerosol (OA) formation was observed in all experiments leading to increases of the OA concentration by 20-70%. The oxygen to carbon ratio of the OA increased by 50% on average and the mass spectra of the produced OA was quite similar to that of the oxidized OA mass spectra reported during winter in urban areas. Good correlation was also observed with the produced mass spectra from nocturnal aging of laboratory biomass burning emissions showing the strong contribution of biomass burning emissions in the SOA formation during cold nights with high biomass burning activities. Concentrations of NO&lt;sub&gt;3&lt;/sub&gt; radicals as high as 25 ppt were measured in the perturbed chamber with an accompanying production of 0.2-1.2 &amp;#956;g m&lt;sup&gt;-3&lt;/sup&gt; of organic nitrate. These results strongly indicate that the OA in biomass burning plumes can evolve rapidly even during wintertime periods with low photochemical activity.&lt;/p&gt;

scholarly journals The link between organic aerosol mass loading and degree of oxygenation: an α-pinene photooxidation study

2013 ◽  
Vol 13 (13) ◽  
pp. 6493-6506 ◽  
Author(s):  
L. Pfaffenberger ◽  
P. Barmet ◽  
J. G. Slowik ◽  
A. P. Praplan ◽  
J. Dommen ◽  
...  
Keyword(s):  
Mass Spectra ◽  
Organic Aerosol ◽  
Mass Loading ◽  
Smog Chamber ◽  
Organic Mass ◽  
Aerosol Composition ◽  
Ambient Aerosol ◽  
Aerosol Mass ◽  
Hygroscopic Properties ◽  
Mass Concentrations

Abstract. A series of smog chamber (SC) experiments was conducted to identify factors responsible for the discrepancy between ambient and SC aerosol degree of oxygenation. An Aerodyne high-resolution time-of-flight aerosol mass spectrometer is used to compare mass spectra from α-pinene photooxidation with ambient aerosol. Composition is compared in terms of the fraction of particulate CO2+, a surrogate for carboxylic acids, vs. the fraction of C2H3O+, a surrogate for aldehydes, alcohols and ketones, as well as in the Van Krevelen space, where the evolution of the atomic hydrogen-to-carbon ratio (H : C) vs. the atomic oxygen-to-carbon ratio (O : C) is investigated. Low (near-ambient) organic mass concentrations were found to be necessary to obtain oxygenation levels similar to those of low-volatility oxygenated organic aerosol (LV-OOA) commonly identified in ambient measurements. The effects of organic mass loading and OH (hydroxyl radical) exposure were decoupled by inter-experiment comparisons at the same integrated OH concentration. An OH exposure between 3 and 25 × 107 cm−3 h is needed to increase O : C by 0.05 during aerosol aging. For the first time, LV-OOA-like aerosol from the abundant biogenic precursor α-pinene was produced in a smog chamber by oxidation at typical atmospheric OH concentrations. Significant correlation between measured secondary organic aerosol (SOA) and reference LV-OOA mass spectra is shown by Pearson's R2 values larger than 0.90 for experiments with low organic mass concentrations between 1.2 and 18 μg m−3 at an OH exposure of 4 × 107 cm−3 h, corresponding to about two days of oxidation time in the atmosphere, based on a global mean OH concentration of ~ 1 × 106 cm−3. α-Pinene SOA is more oxygenated at low organic mass loadings. Because the degree of oxygenation influences the chemical, volatility and hygroscopic properties of ambient aerosol, smog chamber studies must be performed at near-ambient concentrations to accurately simulate ambient aerosol properties.

scholarly journals Nighttime chemistry of biomass burning emissions in urban areas: A dual mobile chamber study

2021 ◽  
Vol 21 (19) ◽  
pp. 15337-15349
Author(s):  
Spiro D. Jorga ◽  
Kalliopi Florou ◽  
Christos Kaltsonoudis ◽  
John K. Kodros ◽  
Christina Vasilakopoulou ◽  
...  
Keyword(s):  
Biomass Burning ◽  
Urban Areas ◽  
Mass Spectra ◽  
Ambient Air ◽  
Organic Aerosol ◽  
Photochemical Activity ◽  
Organic Nitrate ◽  
Starting Point ◽  
No3 Radical ◽  
High Concentrations

Abstract. Residential biomass burning for heating purposes is an important source of air pollutants during winter. Here we test the hypothesis that significant secondary organic aerosol production can take place even during winter nights through oxidation of the emitted organic vapors by the nitrate (NO3) radical produced during the reaction of ozone and nitrogen oxides. We use a mobile dual smog chamber system which allows the study of chemical aging of ambient air against a control reference. Ambient urban air sampled during a wintertime campaign during nighttime periods with high concentrations of biomass burning emissions was used as the starting point for the aging experiments. Biomass burning organic aerosol (OA) was, on average, 70 % of the total OA at the beginning of our experiments. Ozone was added in the perturbed chamber to simulate mixing with background air (and subsequent NO3 radical production and aging), while the second chamber was used as a reference. Following the injection of ozone, rapid OA formation was observed in all experiments, leading to increases in the OA concentration by 20 %–70 %. The oxygen-to-carbon ratio of the OA increased on average by 50 %, and the mass spectra of the produced OA was quite similar to the oxidized OA mass spectra reported during winter in urban areas. Furthermore, good correlation was found for the OA mass spectra between the ambient-derived emissions in this study and the nocturnal aged laboratory-derived biomass burning emissions from previous work. Concentrations of NO3 radicals as high as 25 ppt (parts per trillion) were measured in the perturbed chamber, with an accompanying production of 0.1–3.2 µg m−3 of organic nitrate in the aerosol phase. Organic nitrate represented approximately 10 % of the mass of the secondary OA formed. These results strongly indicate that the OA in biomass burning plumes can chemically evolve rapidly even during wintertime periods with low photochemical activity.

scholarly journals Single particle characterization of biomass burning organic aerosol (BBOA): evidence for non-uniform mixing of high molecular weight organics and potassium

2015 ◽  
Vol 15 (22) ◽  
pp. 32157-32183 ◽  
Author(s):  
A. K. Y. Lee ◽  
M. D. Willis ◽  
R. M. Healy ◽  
J. M. Wang ◽  
C.-H. Jeong ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Black Carbon ◽  
High Molecular Weight ◽  
Biomass Burning ◽  
Single Particle ◽  
Critical Role ◽  
Organic Aerosol ◽  
Mixing State ◽  
Particle Measurements ◽  
Near Ultraviolet

Abstract. Biomass burning is a major source of black carbon (BC) and primary organic aerosol globally. In particular, biomass burning organic aerosol (BBOA) is strongly associated with atmospheric brown carbon (BrC) that absorbs near ultraviolet and visible light, resulting in significant impacts on regional visibility degradation and radiative forcing. The mixing state of BBOA can play a critical role in the prediction of aerosol optical properties. In this work, single particle measurements from a soot-particle aerosol mass spectrometer coupled with a light scattering module (LS-SP-AMS) were performed to examine the mixing state of BBOA, refractory black carbon (rBC) and potassium (K+, a tracer for biomass burning aerosol) in an air mass influenced by aged biomass burning. Cluster analysis of single particle measurements identified five BBOA-related particle types. rBC accounted for 3–14 w.t. % of these particle types on average. Only one particle type exhibited a strong ion signal for K+, with mass spectra characterized by low molecular weight organic species. The remaining four particle types were classified based on the apparent molecular weight of the BBOA constituents. Two particle types were associated with low potassium content and significant amounts of high molecular weight (HMW) organic compounds. Our observations indicate non-uniform mixing of particles within a biomass burning plume in terms of molecular weight and illustrate that HMW BBOA can be a key contributor to low-volatility BrC observed in BBOA particles.

scholarly journals Formation of secondary organic aerosol coating on black carbon particles near vehicular emissions

2017 ◽  
Author(s):  
Alex K. Y. Lee ◽  
Chia-Li Chen ◽  
Jun Liu ◽  
Derek J. Price ◽  
Raghu Betha ◽  
...  
Keyword(s):  
Black Carbon ◽  
Mass Spectrometer ◽  
Secondary Organic Aerosol ◽  
Spectral Characteristics ◽  
Organic Aerosol ◽  
Vehicular Emissions ◽  
Aerosol Mass Spectrometer ◽  
Diurnal Cycles ◽  
Aerosol Mass ◽  
Inorganic Species

Abstract. Black carbon (BC) emitted from incomplete combustion can result in significant impacts on air quality and climate. Understanding the mixing state of ambient BC and the chemical characteristics of its associated coatings are particularly important to evaluate BC fate and environmental impacts. In this study, we investigate the formation of organic coatings on BC particles in an urban environment (Fontana, California) under hot and dry conditions using a Soot-Particle Aerosol Mass Spectrometer (SP-AMS). The SP-AMS was operated in a configuration that can detect refractory BC (rBC) particles and their coatings exclusively. Using the −log(NOx/NOy) ratio as a proxy for photochemical age of air masses, substantial formation of secondary organic aerosol (SOA) coatings on rBC particles was observed due to active photochemistry in the afternoon, whereas primary organic aerosol (POA) components were strongly associated with rBC from fresh vehicular missions in the morning rush hours. There is also evidence that cooking related organic aerosols were externally mixed from rBC. Positive matrix factorization and elemental analysis illustrate that most of the observed SOA coatings were freshly formed, providing an opportunity to examine SOA coating formation on rBC near vehicular emissions. Approximately 7–20 wt % of secondary organic and inorganic species were estimated to be internally mixed with rBC on average, implying that rBC is unlikely the major condensation sinks of SOA in this study. Diurnal cycles of oxygenated organic aerosol (OOA) observed by a co-located standard high-resolution time-of-flight aerosol mass spectrometer (HR-ToF-MS) correlated well with that of SOA coatings on rBC, but their mass spectral characteristics were different from each other. Our results suggest that at least a portion of SOA materials condensed on rBC surface were chemically different from OOA particles that were externally mixed with rBC, although they are both generated from local photochemistry.

scholarly journals Effect of secondary organic aerosol coating thickness on the real-time detection and characterization of biomass-burning soot by two particle mass spectrometers

2016 ◽  
Vol 9 (12) ◽  
pp. 6117-6137 ◽  
Author(s):  
Adam T. Ahern ◽  
Ramachandran Subramanian ◽  
Georges Saliba ◽  
Eric M. Lipsky ◽  
Neil M. Donahue ◽  
...  
Keyword(s):  
Black Carbon ◽  
Biomass Burning ◽  
Radiative Forcing ◽  
Secondary Organic Aerosol ◽  
Organic Aerosol ◽  
Particle Mass ◽  
Laser Vaporization ◽  
Mass Spectrometers ◽  
Ir Laser ◽  
Biomass Burning Particles

Abstract. Biomass burning is a large source of light-absorbing refractory black carbon (rBC) particles with a wide range of morphologies and sizes. The net radiative forcing from these particles is strongly dependent on the amount and composition of non-light-absorbing material internally mixed with the rBC and on the morphology of the mixed particles. Understanding how the mixing state and morphology of biomass-burning aerosol evolves in the atmosphere is critical for constraining the influence of these particles on radiative forcing and climate. We investigated the response of two commercial laser-based particle mass spectrometers, the vacuum ultraviolet (VUV) ablation LAAPTOF and the IR vaporization SP-AMS, to monodisperse biomass-burning particles as we sequentially coated the particles with secondary organic aerosol (SOA) from α-pinene ozonolysis. We studied three mobility-selected soot core sizes, each with a number of successively thicker coatings of SOA applied. Using IR laser vaporization, the SP-AMS had different changes in sensitivity to rBC compared to potassium as a function of applied SOA coatings. We show that this is due to different effective beam widths for the IR laser vaporization region of potassium versus black carbon. The SP-AMS's sensitivity to black carbon (BC) mass was not observed to plateau following successive SOA coatings, despite achieving high OA : BC mass ratios greater than 9. We also measured the ion fragmentation pattern of biomass-burning rBC and found it changed only slightly with increasing SOA mass. The average organic matter ion signal measured by the LAAPTOF demonstrated a positive correlation with the condensed SOA mass on individual particles, despite the inhomogeneity of the particle core compositions. This demonstrates that the LAAPTOF can obtain quantitative mass measurements of aged soot-particle composition from realistic biomass-burning particles with complex morphologies and composition.

Sign in / Sign up

Export Citation Format

Share Document