scholarly journals Aerosol chemical and optical properties over the Paris area within ESQUIF project

2006 ◽  
Vol 6 (1) ◽  
pp. 401-454 ◽  
Author(s):  
A. Hodzic ◽  
R. Vautard ◽  
P. Chazette ◽  
L. Menut ◽  
B. Bessagnet
Keyword(s):  
Optical Properties ◽  
Secondary Organic Aerosols ◽  
Organic Aerosols ◽  
Dust Particles ◽  
Aerosol Size Distribution ◽  
Aerosol Composition ◽  
Aerosol Mass ◽  
Coarse Mode ◽  
Paris Area ◽  
Flight Trajectories

Abstract. Aerosol chemical and optical properties are extensively investigated for the first time over the Paris Basin in July 2000 within the ESQUIF project. The measurement campaign offers an exceptional framework to evaluate the performances of the chemistry-transport model CHIMERE in simulating concentrations of gaseous and aerosol pollutants, as well as the aerosol-size distribution and composition in polluted urban environment against ground-based and airborne measurements. A detailed comparison of measured and simulated variables during the second half of July with particular focus on 19 and 31 pollution episodes reveals an overall good agreement for gas-species and aerosol components both at the ground level and along flight trajectories, and the absence of systematic biases in simulated meteorological variables such as wind speed, relative humidity and boundary layer height as computed by the MM5 model. A good consistency in ozone and NO concentrations demonstrates the ability of the model to reproduce fairly well the plume structure and location both on 19 and 31 July, despite an underestimation of the amplitude of ozone concentrations on 31 July. The spatial and vertical aerosol distributions are also examined by comparing simulated and observed lidar vertical profiles along flight trajectories on 31 July and confirmed the model capacity to simulate the plume characteristics. The comparison of observed and modeled aerosol components in the southwest suburb of Paris during the second half of July indicated that the aerosol composition is rather correctly reproduced, although the total aerosol mass is underestimated of about 20%. The simulated Parisian aerosol is dominated by primary particulate matter that accounts for anthropogenic and biogenic primary particles (40%) and inorganic aerosol fraction (40%) including nitrate (8%), sulfate (22%) and ammonium (10%). The secondary organic aerosols (SOA) represent 12% of the total aerosol mass, while the mineral dust accounts for 8%. The comparison demonstrated the absence of systematic errors in the simulated sulfate, ammonium and nitrates total concentrations. However for nitrates the observed partition between fine and coarse mode is not reproduced. In CHIMERE there is a clear lack of coarse-mode nitrates. This calls for additional parameterizations in order to account for the heterogeneous formation of nitrate onto dust particles. Larger discrepancies are obtained for the secondary organic aerosols due to both inconsistencies in the SOA formation processes in the model leading to an underestimation of their mass and large uncertainties in the determination of the measured aerosol organic fraction. The observed mass distribution of aerosols is not well reproduced, although no clear explanation can be given.

scholarly journals Aerosol chemical and optical properties over the Paris area within ESQUIF project

2006 ◽  
Vol 6 (11) ◽  
pp. 3257-3280 ◽  
Author(s):  
A. Hodzic ◽  
R. Vautard ◽  
P. Chazette ◽  
L. Menut ◽  
B. Bessagnet
Keyword(s):  
Optical Properties ◽  
Secondary Organic Aerosols ◽  
Organic Aerosols ◽  
Dust Particles ◽  
Aerosol Size Distribution ◽  
Aerosol Composition ◽  
Aerosol Mass ◽  
Coarse Mode ◽  
Paris Area ◽  
Flight Trajectories

Abstract. Aerosol chemical and optical properties are extensively investigated for the first time over the Paris Basin in July 2000 within the ESQUIF project. The measurement campaign offers an exceptional framework to evaluate the performances of the chemistry-transport model CHIMERE in simulating concentrations of gaseous and aerosol pollutants, as well as the aerosol-size distribution and composition in polluted urban environments against ground-based and airborne measurements. A detailed comparison of measured and simulated variables during the second half of July with particular focus on 19 and 31 pollution episodes reveals an overall good agreement for gas-species and aerosol components both at the ground level and along flight trajectories, and the absence of systematic biases in simulated meteorological variables such as wind speed, relative humidity and boundary layer height as computed by the MM5 model. A good consistency in ozone and NO concentrations demonstrates the ability of the model to reproduce the plume structure and location fairly well both on 19 and 31 July, despite an underestimation of the amplitude of ozone concentrations on 31 July. The spatial and vertical aerosol distributions are also examined by comparing simulated and observed lidar vertical profiles along flight trajectories on 31 July and confirm the model capacity to simulate the plume characteristics. The comparison of observed and modeled aerosol components in the southwest suburb of Paris during the second half of July indicates that the aerosol composition is rather correctly reproduced, although the total aerosol mass is underestimated by about 20%. The simulated Parisian aerosol is dominated by primary particulate matter that accounts for anthropogenic and biogenic primary particles (40%), and inorganic aerosol fraction (40%) including nitrate (8%), sulfate (22%) and ammonium (10%). The secondary organic aerosols (SOA) represent 12% of the total aerosol mass, while the mineral dust accounts for 8%. The comparison demonstrates the absence of systematic errors in the simulated sulfate, ammonium and nitrates total concentrations. However, for nitrates the observed partition between fine and coarse mode is not reproduced. In CHIMERE there is a clear lack of coarse-mode nitrates. This calls for additional parameterizations in order to account for the heterogeneous formation of nitrate onto dust particles. Larger discrepancies are obtained for the secondary organic aerosols due to both inconsistencies in the SOA formation processes in the model leading to an underestimation of their mass and large uncertainties in the determination of the measured aerosol organic fraction. The observed mass distribution of aerosols is not well reproduced, although no clear explanation can be given.

scholarly journals Black carbon aerosol mixing state, organic aerosols and aerosol optical properties over the United Kingdom

2011 ◽  
Vol 11 (17) ◽  
pp. 9037-9052 ◽  
Author(s):  
G. R. McMeeking ◽  
W. T. Morgan ◽  
M. Flynn ◽  
E. J. Highwood ◽  
K. Turnbull ◽  
...  
Keyword(s):  
Optical Properties ◽  
United Kingdom ◽  
Radiative Forcing ◽  
Organic Aerosols ◽  
Mixing State ◽  
Aerosol Composition ◽  
Air Masses ◽  
The United Kingdom ◽  
Aerosol Mass ◽  
Urban Plumes

Abstract. Black carbon (BC) aerosols absorb sunlight thereby leading to a positive radiative forcing and a warming of climate and can also impact human health through their impact on the respiratory system. The state of mixing of BC with other aerosol species, particularly the degree of internal/external mixing, has been highlighted as a major uncertainty in assessing its radiative forcing and hence its climate impact, but few in situ observations of mixing state exist. We present airborne single particle soot photometer (SP2) measurements of refractory BC (rBC) mass concentrations and mixing state coupled with aerosol composition and optical properties measured in urban plumes and regional pollution over the United Kingdom. All data were obtained using instrumentation flown on the UK's BAe-146-301 large Atmospheric Research Aircraft (ARA) operated by the Facility for Airborne Atmospheric Measurements (FAAM). We measured sub-micron aerosol composition using an aerosol mass spectrometer (AMS) and used positive matrix factorization to separate hydrocarbon-like (HOA) and oxygenated organic aerosols (OOA). We found a higher number fraction of thickly coated rBC particles in air masses with large OOA relative to HOA, higher ozone-to-nitrogen oxides (NOx) ratios and large concentrations of total sub-micron aerosol mass relative to rBC mass concentrations. The more ozone- and OOA-rich air masses were associated with transport from continental Europe, while plumes from UK cities had higher HOA and NOx and fewer thickly coated rBC particles. We did not observe any significant change in the rBC mass absorption efficiency calculated from rBC mass and light absorption coefficients measured by a particle soot absorption photometer despite observing significant changes in aerosol composition and rBC mixing state. The contributions of light scattering and absorption to total extinction (quantified by the single scattering albedo; SSA) did change for different air masses, with lower SSA observed in urban plumes compared to regional aerosol (0.85 versus 0.9–0.95). We attribute these differences to the presence of relatively rapidly formed secondary aerosol, primarily OOA and ammonium nitrate, which must be taken into account in radiative forcing calculations.

scholarly journals Black carbon aerosol mixing state, organic aerosols and aerosol optical properties over the UK

2011 ◽  
Vol 11 (5) ◽  
pp. 14991-15027 ◽  
Author(s):  
G. R. McMeeking ◽  
W. T. Morgan ◽  
M. Flynn ◽  
E. J. Highwood ◽  
K. Turnbull ◽  
...  
Keyword(s):  
Optical Properties ◽  
Black Carbon ◽  
Radiative Forcing ◽  
Organic Aerosols ◽  
Mixing State ◽  
Aerosol Composition ◽  
Air Masses ◽  
Aerosol Mass ◽  
The Uk ◽  
Urban Plumes

Abstract. Black carbon (BC) aerosols absorb sunlight thereby leading to a positive radiative forcing and a warming of climate and can also impact human health through their impact on the respiratory system. The state of mixing of BC with other aerosol species, particularly the degree of internal/external mixing, has been highlighted as a major uncertainty in assessing its radiative forcing and hence its climate impact, but few in situ observations of mixing state exist. We present airborne single particle soot photometer (SP2) measurements of refractory BC (rBC) mass concentrations and mixing state coupled with aerosol composition and optical properties measured in urban plumes and regional pollution over the UK. All data were obtained using instrumentation flown on the UK's BAe-146-301 large Atmospheric Research Aircraft (ARA) operated by the Facility for Airborne Atmospheric Measurements (FAAM). We measured sub-micron aerosol composition using an aerosol mass spectrometer (AMS) and used positive matrix factorization to separate hydrocarbon-like (HOA) and oxygenated organic aerosols (OOA). We found a higher number fraction of thickly coated rBC particles in air masses with large OOA relative to HOA, higher ozone-to-nitrogen oxides (NOx) ratios and large concentrations of total sub-micron aerosol mass relative to rBC mass concentrations. The more ozone- and OOA-rich air masses were associated with transport from continental Europe, while plumes from UK cities had higher HOA and NOx and fewer thickly coated rBC particles. We did not observe any significant change in the rBC mass absorption efficiency calculated from rBC mass and light absorption coefficients measured by a particle soot absorption photometer despite observing significant changes in aerosol composition and rBC mixing state. The contributions of light scattering and absorption to total extinction (quantified by the single scattering albedo; SSA) did change for different air masses, with lower SSA observed in urban plumes compared to regional aerosol (0.85 versus 0.9–0.95). We attribute these differences to the presence of relatively rapidly formed secondary aerosol, primarily OOA and ammonium nitrate, which must be taken into account in radiative forcing calculations.

scholarly journals Optical properties of black carbon in cookstove emissions coated with secondary organic aerosols: Measurements and modeling

2016 ◽  
Vol 50 (11) ◽  
pp. 1264-1276 ◽  
Author(s):  
Georges Saliba ◽  
R. Subramanian ◽  
Rawad Saleh ◽  
Adam T. Ahern ◽  
Eric M. Lipsky ◽  
...  
Keyword(s):  
Optical Properties ◽  
Black Carbon ◽  
Secondary Organic Aerosols ◽  
Organic Aerosols

Effect of chemical structure on optical properties of secondary organic aerosols derived from C12 alkanes

2021 ◽  
Vol 751 ◽  
pp. 141620
Author(s):  
Junling Li ◽  
Weigang Wang ◽  
Kun Li ◽  
Wenyu Zhang ◽  
Chao Peng ◽  
...  
Keyword(s):  
Optical Properties ◽  
Chemical Structure ◽  
Secondary Organic Aerosols ◽  
Organic Aerosols

scholarly journals Cloud Activating Properties of Aerosol Observed during CELTIC

2007 ◽  
Vol 64 (2) ◽  
pp. 441-459 ◽  
Author(s):  
Craig A. Stroud ◽  
Athanasios Nenes ◽  
Jose L. Jimenez ◽  
Peter F. DeCarlo ◽  
J. Alex Huffman ◽  
...  
Keyword(s):  
Kinetic Model ◽  
Size Distribution ◽  
Organic Aerosol ◽  
Aerosol Size Distribution ◽  
Model Bias ◽  
Aerosol Composition ◽  
Ambient Aerosol ◽  
Aerosol Mass ◽  
Mass Fractions ◽  
Mass Size

Abstract Measurements of aerosol size distribution, chemical composition, and cloud condensation nuclei (CCN) concentration were performed during the Chemical Emission, Loss, Transformation, and Interactions with Canopies (CELTIC) field program at Duke Forest in North Carolina. A kinetic model of the cloud activation of ambient aerosol in the chamber of the CCN instrument was used to perform an aerosol–CCN closure study. This study advances prior investigations by employing a novel fitting algorithm that was used to integrate scanning mobility particle sizer (SMPS) measurements of aerosol number size distribution and aerosol mass spectrometer (AMS) measurements of the mass size distribution for sulfate, nitrate, ammonium, and organics into a single, coherent description of the ambient aerosol in the size range critical to aerosol activation (around 100-nm diameter). Three lognormal aerosol size modes, each with a unique internally mixed composition, were used as input into the kinetic model. For the two smaller size modes, which control CCN number concentration, organic aerosol mass fractions for the defined cases were between 58% and 77%. This study is also unique in that the water vapor accommodation coefficient was estimated based on comparing the initial timing for CCN activation in the instrument chamber with the activation predicted by the kinetic model. The kinetic model overestimated measured CCN concentrations, especially under polluted conditions. Prior studies have attributed a positive model bias to an incomplete understanding of the aerosol composition, especially the role of organics in the activation process. This study shows that including measured organic mass fractions with an assumed organic aerosol speciation profile (pinic acid, fulvic acid, and levoglucosan) and an assumed organic aerosol solubility of 0.02 kg kg−1 still resulted in a significant model positive bias for polluted case study periods. The slope and y intercept for the CCN predicted versus CCN observed regression was found to be 1.9 and −180 cm−3, respectively. The overprediction generally does not exceed uncertainty limits but is indicative that a bias exists in the measurements or application of model. From this study, uncertainties in the particle number and mass size distributions as the cause for the model bias can be ruled out. The authors are also confident that the model is including the effects of growth kinetics on predicted activated number. However, one cannot rule out uncertainties associated with poorly characterized CCN measurement biases, uncertainties in assumed organic solubility, and uncertainties in aerosol mixing state. Sensitivity simulations suggest that assuming either an insoluble organic fraction or external aerosol mixing were both sufficient to reconcile the model bias.

Optical properties of secondary organic aerosols derived from long-chain alkanes under various NOx and seed conditions

2017 ◽  
Vol 579 ◽  
pp. 1699-1705 ◽  
Author(s):  
Junling Li ◽  
Kun Li ◽  
Weigang Wang ◽  
Jing Wang ◽  
Chao Peng ◽  
...  
Keyword(s):  
Optical Properties ◽  
Secondary Organic Aerosols ◽  
Organic Aerosols ◽  
Long Chain

scholarly journals Optical Properties of the Urban Aerosol Particles Obtained from Ground Based Measurements and Satellite-Based Modelling Studies

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Genrik Mordas ◽  
Nina Prokopciuk ◽  
Steigvilė Byčenkienė ◽  
Jelena Andriejauskienė ◽  
Vidmantas Ulevicius
Keyword(s):  
Optical Properties ◽  
Light Scattering ◽  
Urban Environment ◽  
Size Distribution ◽  
Number Concentration ◽  
Scattering Coefficient ◽  
Dust Particles ◽  
Aerosol Size Distribution ◽  
Air Masses ◽  
The Impact

Applications of satellite remote sensing data combined with ground measurements and model simulation were applied to study aerosol optical properties as well as aerosol long-range transport under the impact of large scale circulation in the urban environment in Lithuania (Vilnius). Measurements included the light scattering coefficients at 3 wavelengths (450, 550, and 700 nm) measured with an integrating nephelometer and aerosol particle size distribution (0.5–12 μm) and number concentration (Dpa> 0.5 μm) registered by aerodynamic particle sizer. Particle number concentration and mean light scattering coefficient varied from relatively low values of 6.0 cm−3and 12.8 Mm−1associated with air masses passed over Atlantic Ocean to relatively high value of 119 cm−3and 276 Mm−1associated with South-Western air masses. Analysis shows such increase in the aerosol light scattering coefficient (276 Mm−1) during the 3rd of July 2012 was attributed to a major Sahara dust storm. Aerosol size distribution with pronounced coarse particles dominance was attributed to the presence of dust particles, while resuspended dust within the urban environment was not observed.

Sign in / Sign up

Export Citation Format

Share Document