scholarly journals Ozone Monitoring Instrument (OMI) Aura nitrogen dioxide standard product version 4.0 with improved surface and cloud treatments

2021 ◽  
Vol 14 (1) ◽  
pp. 455-479
Author(s):  
Lok N. Lamsal ◽  
Nickolay A. Krotkov ◽  
Alexander Vasilkov ◽  
Sergey Marchenko ◽  
Wenhan Qin ◽  
...  
Keyword(s):  
Nitrogen Dioxide ◽  
Retrieval Algorithm ◽  
Data Sets ◽  
Ozone Monitoring Instrument ◽  
Monitoring Instrument ◽  
Standard Product ◽  
Independent Observations ◽  
Moderate Resolution ◽  
Ozone Monitoring ◽  
Moderate Resolution Imaging Spectroradiometer

Abstract. We present a new and improved version (V4.0) of the NASA standard nitrogen dioxide (NO2) product from the Ozone Monitoring Instrument (OMI) on the Aura satellite. This version incorporates the most salient improvements for OMI NO2 products suggested by expert users and enhances the NO2 data quality in several ways through improvements to the air mass factors (AMFs) used in the retrieval algorithm. The algorithm is based on the geometry-dependent surface Lambertian equivalent reflectivity (GLER) operational product that is available on an OMI pixel basis. GLER is calculated using the vector linearized discrete ordinate radiative transfer (VLIDORT) model, which uses as input high-resolution bidirectional reflectance distribution function (BRDF) information from NASA's Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) instruments over land and the wind-dependent Cox–Munk wave-facet slope distribution over water, the latter with a contribution from the water-leaving radiance. The GLER combined with consistently retrieved oxygen dimer (O2–O2) absorption-based effective cloud fraction (ECF) and optical centroid pressure (OCP) provide improved information to the new NO2 AMF calculations. The new AMFs increase the retrieved tropospheric NO2 by up to 50 % in highly polluted areas; these differences arise from both cloud and surface BRDF effects as well as biases between the new MODIS-based and previously used OMI-based climatological surface reflectance data sets. We quantitatively evaluate the new NO2 product using independent observations from ground-based and airborne instruments. The new V4.0 data and relevant explanatory documentation are publicly available from the NASA Goddard Earth Sciences Data and Information Services Center (https://disc.gsfc.nasa.gov/datasets/OMNO2_V003/summary/, last access: 8 November 2020), and we encourage their use over previous versions of OMI NO2 products.

scholarly journals OMI/Aura Nitrogen Dioxide Standard Product with Improved Surface and Cloud Treatments

2020 ◽  
Author(s):  
Lok N. Lamsal ◽  
Nickolay A. Krotkov ◽  
Alexander Vasilkov ◽  
Sergey Marchenko ◽  
Wenhan Qin ◽  
...  
Keyword(s):  
Nitrogen Dioxide ◽  
Global Scale ◽  
Quality Data ◽  
Retrieval Algorithm ◽  
Data Sets ◽  
Ozone Monitoring Instrument ◽  
Standard Product ◽  
Independent Observations ◽  
Moderate Resolution ◽  
Moderate Resolution Imaging Spectroradiometer

Abstract. We present a new and improved version (V4.0) of the NASA standard nitrogen dioxide (NO2) product from the Ozone Monitoring Instrument (OMI) on the Aura satellite. This version incorporates the most salient improvements for regional OMI NO2 products suggested by expert users, and enhances the NO2 data quality in several ways on a global scale through improvements to the air mass factors (AMFs) used in the retrieval algorithm. The algorithm is based on a conceptually new, geometry-dependent surface Lambertian equivalent reflectivity (GLER) operational product that is available on an OMI pixel basis. GLER is calculated using the vector linearized discrete ordinate radiative transfer (VLIDORT) model, which uses as input high resolution bidirectional reflectance distribution function (BRDF) information from NASA’s Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) instruments over land and the wind-dependent Cox–Munk wave-facet slope distribution over water, the latter with contribution from the water-leaving radiance. The GLER combined with consistently retrieved oxygen dimer (O2-O2) absorption-based cloud fractions and pressures provide high-quality data inputs to the new NO2 AMF scheme. The new AMFs increase the retrieved tropospheric NO2 by up to 50 % in highly polluted areas; these differences arise from both cloud and surface BRDF effects as well as biases between the new MODIS-based and previously used OMI-based climatological surface reflectance data sets. We quantitatively evaluate the new NO2 product using independent observations from ground-based and airborne instruments. The improved NO2 data record can be used for studies related to emissions and trends of nitrogen oxides (NOx) and co-emitted gases. The new V4.0 data and relevant explanatory documentation are publicly available from the NASA Goddard Earth Sciences Data and Information Services Center (https://disc.gsfc.nasa.gov/datasets/OMNO2_V003/summary/), and we encourage their use over previous versions of OMI NO2 products.

scholarly journals Aerosol direct radiative effect over clouds from a synergy of Ozone Monitoring Instrument (OMI) and Moderate Resolution Imaging Spectroradiometer (MODIS) reflectances

2019 ◽  
Vol 12 (9) ◽  
pp. 5119-5135 ◽  
Author(s):  
Martin de Graaf ◽  
L. Gijsbert Tilstra ◽  
Piet Stammes
Keyword(s):  
Spatial Resolution ◽  
Spectral Resolution ◽  
Data Retrieval ◽  
Radiative Effect ◽  
Ozone Monitoring Instrument ◽  
Monitoring Instrument ◽  
Moderate Resolution ◽  
Resolution Imaging ◽  
Ozone Monitoring ◽  
Moderate Resolution Imaging Spectroradiometer

Abstract. The retrieval of geophysical parameters is increasingly dependent on synergistic use of satellite instruments. More sophisticated parameters can be retrieved and the accuracy of retrievals can be increased when more information is combined. In this paper, a synergistic application of Ozone Monitoring Instrument (OMI), on the Aura platform, and Moderate Resolution Imaging Spectroradiometer (MODIS), on the Aqua platform, Level 1B reflectances is described, enabling the retrieval of the aerosol direct radiative effect (DRE) over clouds using the differential aerosol absorption (DAA) technique. This technique was first developed for reflectances from the SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY (SCIAMACHY) on the Environmental Satellite (Envisat), which had the unique capability of measuring contiguous radiances from the ultraviolet (UV) at 240 to 1750 nm in the shortwave-infrared (SWIR), at a moderate spectral resolution of 0.2 to 1.5 nm. However, the spatial resolution and global coverage of SCIAMACHY was limited, and Envisat stopped delivering data in 2012. In order to continue the DRE data retrieval, reflectances from OMI and MODIS, flying in formation, were combined from the UV to the SWIR. This resulted in reflectances at a limited but sufficient spectral resolution, available at the OMI pixel grid, which have a much higher spatial resolution and coverage than SCIAMACHY. The combined reflectance spectra allow the retrieval of cloud microphysical parameters in the SWIR, and the subsequent retrieval of aerosol DRE over cloud scenes using the DAA technique. For liquid cloud scenes in the south-east Atlantic region with cloud fraction (CF) >0.3, the area-averaged instantaneous aerosol DRE over clouds in June to August 2006 was 25 Wm−2 with a standard deviation of 30 Wm−2. The maximum area-averaged instantaneous DRE from OMI–MODIS in August 2006 was 75.6±13 Wm−2. The new aerosol DRE over-cloud dataset from OMI–MODIS is compared to the SCIAMACHY dataset for the period 2006 to 2009, showing a very high correlation. The OMI–MODIS DRE dataset over the Atlantic Ocean is highly correlated to above-cloud AOT measurements from OMI and MODIS. It is related to AOT measurements over Ascension Island in 2016, showing the transport of smoke all the way from its source region in Africa over the Atlantic to Ascension and beyond.

scholarly journals Validation of Ozone Monitoring Instrument nitrogen dioxide columns

2008 ◽  
Vol 113 (D15) ◽  
Author(s):  
E. A. Celarier ◽  
E. J. Brinksma ◽  
J. F. Gleason ◽  
J. P. Veefkind ◽  
A. Cede ◽  
...  
Keyword(s):  
Nitrogen Dioxide ◽  
Ozone Monitoring Instrument ◽  
Monitoring Instrument ◽  
Ozone Monitoring

scholarly journals Changes in Atmospheric, Meteorological, and Ocean Parameters Associated with the 12 January 2020 Taal Volcanic Eruption

2020 ◽  
Vol 12 (6) ◽  
pp. 1026
Author(s):  
Feng Jing ◽  
Akshansha Chauhan ◽  
Ramesh P Singh ◽  
Prasanjit Dash
Keyword(s):  
Volcanic Eruption ◽  
Volcanic Plume ◽  
Ozone Monitoring Instrument ◽  
Volcanic Gas ◽  
Sea Temperature ◽  
Monitoring Instrument ◽  
Taal Volcano ◽  
Moderate Resolution ◽  
Satellite Sensors ◽  
Moderate Resolution Imaging Spectroradiometer

The Taal volcano erupted on 12 January 2020, the first time since 1977. About 35 mild earthquakes (magnitude greater than 4.0) were observed on 12 January 2020 induced from the eruption. In the present paper, we analyzed optical properties of volcanic aerosols, volcanic gas emission, ocean parameters using multi-satellite sensors, namely, MODIS (Moderate Resolution Imaging Spectroradiometer), AIRS (Atmospheric Infrared Sounder), OMI (Ozone Monitoring Instrument), TROPOMI (TROPOspheric Monitoring Instrument) and ground observations, namely, Argo, and AERONET (AErosol RObotic NETwork) data. Our detailed analysis shows pronounced changes in all the parameters, which mainly occurred in the western and south-western regions because the airmass of the Taal volcano spreads westward according to the analysis of airmass trajectories and wind directions. The presence of finer particles has been observed by analyzing aerosol properties that can be attributed to the volcanic plume after the eruption. We have also observed an enhancement in SO2, CO, and water vapor, and a decrease in Ozone after a few days of the eruption. The unusual variations in salinity, sea temperature, and surface latent heat flux have been observed as a result of the ash from the Taal volcano in the south-west and south-east over the ocean. Our results demonstrate that the observations combining satellite with ground data could provide important information about the changes in the atmosphere, meteorology, and ocean parameters associated with the Taal volcanic eruption.

scholarly journals Validation of MODIS 3 km Land Aerosol Optical Depth from NASA's EOS Terra and Aqua Missions

2018 ◽  
Author(s):  
Pawan Gupta ◽  
Lorraine A. Remer ◽  
Robert C. Levy ◽  
Shana Mattoo
Keyword(s):  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Retrieval Algorithm ◽  
Data Sets ◽  
Aerosol Retrieval ◽  
Moderate Resolution ◽  
Resolution Imaging ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Sensor Degradation ◽  
Over Time

Abstract. The two MODerate Resolution Imaging Spectroradiometer (MODIS) sensors, aboard Earth Observing Satellites (EOS) Terra and Aqua, have been making aerosol observations for more than 15 years. From these observations, the MODIS dark target (DT) aerosol retrieval algorithm provides aerosol optical depth (AOD) products, globally over both land and ocean. In addition to the standard resolution product (10 × 10 km2), the MODIS collection 6 (C006) data release included a higher resolution (3 × 3 km2). Other than accommodations for the two different resolutions, the 10 km, and 3 km DT algorithms are basically the same. In this study, we perform global validation of the higher resolution AOD over global land by comparing against AERONET measurements. The MODIS-AERONET collocated data sets consist of 161,410 high-confidence AOD pairs from 2000 to 2015 for MODIS Terra and 2003 to 2015 for MODIS-Aqua. We find that 62.5 % and 68.4 % of AODs retrieved from MODIS-Terra and MODIS-Aqua, respectively, fall within previously published expected error bounds of ±(0.05 + 0.2*AOD), with a high correlation (R = 0.87). The scatter is not random but exhibits a mean positive bias of ~ 0.06 for Terra and ~ 0.03 for Aqua. These biases for the 3 km product are approximately 0.03 larger than the biases found in similar validations of the 10 km product. The validation results for the 3 km product did not have a relationship to aerosol loading (i.e. true AOD) but did exhibit dependence on quality flags, region, viewing geometry, and aerosol spatial variability. Time series of global MODIS-AERONET differences show that validation is not static, but has changed over the course of both sensors' lifetimes, with MODIS-Terra showing more change over time. The likely cause of the change of validation over time is sensor degradation, but changes in the distribution of AERONET stations and differences in the global aerosol system itself could be contributing to the temporal variability of validation.

scholarly journals An improved tropospheric NO<sub>2</sub> column retrieval algorithm for the Ozone Monitoring Instrument

2011 ◽  
Vol 4 (9) ◽  
pp. 1905-1928 ◽  
Author(s):  
K. F. Boersma ◽  
H. J. Eskes ◽  
R. J. Dirksen ◽  
R. J. van der A ◽  
J. P. Veefkind ◽  
...  
Keyword(s):  
High Resolution ◽  
Surface Albedo ◽  
Retrieval Algorithm ◽  
Ozone Monitoring Instrument ◽  
Air Mass ◽  
Monitoring Instrument ◽  
Tropospheric No2 ◽  
Mass Factor ◽  
Ozone Monitoring ◽  
The Impact

Abstract. We present an improved tropospheric nitrogen dioxide column retrieval algorithm (DOMINO v2.0) for OMI based on better air mass factors (AMFs) and a correction for across-track stripes resulting from calibration errors in the OMI backscattered reflectances. Since October 2004, NO2 retrievals from the Ozone Monitoring Instrument (OMI), a UV/Vis nadir spectrometer onboard NASA's EOS-Aura satellite, have been used with success in several scientific studies focusing on air quality monitoring, detection of trends, and NOx emission estimates. Dedicated evaluations of previous DOMINO tropospheric NO2 retrievals indicated their good quality, but also suggested that the tropospheric columns were susceptible to high biases (by 0–40%), probably because of errors in the air mass factor calculations. Here we update the DOMINO air mass factor approach. We calculate a new look-up table (LUT) for altitude-dependent AMFs based on more realistic atmospheric profile parameters, and include more surface albedo and surface pressure reference points than before. We improve the sampling of the TM4 model, resulting in a priori NO2 profiles that are better mixed throughout the boundary layer. We evaluate the NO2 profiles simulated with the improved TM4 sampling as used in the AMF calculations and show that they are highly consistent with in situ NO2 measurements from aircraft during the INTEX-A and INTEX-B campaigns in 2004 and 2006. Our air mass factor calculations are further updated by the implementation of a high-resolution terrain height and a high-resolution surface albedo climatology based on OMI measurements. Together with a correction for across-track stripes, the overall impact of the improved terrain height and albedo descriptions is modest (<5%) on average over large polluted areas, but still causes significant changes locally. The main changes in the DOMINO v2.0 algorithm follow from the new LUT and the improved TM4 sampling that results in more NO2 simulated aloft, where sensitivity to NO2 is higher, and amount to reductions in tropospheric NO2 columns of up to 20% in winter, and 10% in summer over extended polluted areas. We investigate the impact of aerosols on the NO2 retrieval, and based on a comparison of concurrent retrievals of clouds from OMI and aerosols from MODIS Aqua, we find empirical evidence that OMI cloud retrievals are sensitive to the presence of scattering aerosols. It follows that an implicit correction for the effects of aerosols occurs through the aerosol-induced cloud parameters in DOMINO, and we show that such an empirical correction amounts to a 20 %AMF reduction in summer and ±10% changes in winter over the eastern United States.

Sign in / Sign up

Export Citation Format

Share Document