scholarly journals Standard source of atmospheric black carbon aerosol generated from ultrasonic spray of BC suspension

2017 ◽  
Author(s):  
Ruchen Zhu ◽  
Huixiang Wang ◽  
Xiaoyan Wang ◽  
Hao Liu

Abstract. Black carbon (BC) aerosol has strong radiative forcing and plays an important role in global climate change and human health. A generator with low levels of BC-air is developed in this study for researchers to calibrate BC monitors. Ultrasonic nozzle is applied to atomize BC suspension to produce quantificational BC-air samples which can be used directly as a standard source of BC. Membrane test conducted by balance is used to check up its feasibility. Results show that the relationship of weight increment of membrane and target concentration of BC-air have very good linearity. This confirms that the ultrasonic spray system is a good source to generate standard concentration of BC-air. The device has good feasibility in the BC concentrations range of 0–200 μg m−3. Multi Angle Absorption Photometer (MAAP) is used to detect the concentration of BC-air generated by the ultrasonic spray of suspension. Target concentrations generated by the device accord with the measured data of MAAP.

2020 ◽  
Vol 257 ◽  
pp. 113446 ◽  
Author(s):  
Yogesh Kant ◽  
Darga Saheb Shaik ◽  
Debashis Mitra ◽  
H.C. Chandola ◽  
S. Suresh Babu ◽  
...  

2014 ◽  
Vol 14 (22) ◽  
pp. 12465-12477 ◽  
Author(s):  
B. H. Samset ◽  
G. Myhre ◽  
A. Herber ◽  
Y. Kondo ◽  
S.-M. Li ◽  
...  

Abstract. Atmospheric black carbon (BC) absorbs solar radiation, and exacerbates global warming through exerting positive radiative forcing (RF). However, the contribution of BC to ongoing changes in global climate is under debate. Anthropogenic BC emissions, and the resulting distribution of BC concentration, are highly uncertain. In particular, long-range transport and processes affecting BC atmospheric lifetime are poorly understood. Here we discuss whether recent assessments may have overestimated present-day BC radiative forcing in remote regions. We compare vertical profiles of BC concentration from four recent aircraft measurement campaigns to simulations by 13 aerosol models participating in the AeroCom Phase II intercomparison. An atmospheric lifetime of BC of less than 5 days is shown to be essential for reproducing observations in remote ocean regions, in line with other recent studies. Adjusting model results to measurements in remote regions, and at high altitudes, leads to a 25% reduction in AeroCom Phase II median direct BC forcing, from fossil fuel and biofuel burning, over the industrial era. The sensitivity of modelled forcing to BC vertical profile and lifetime highlights an urgent need for further flight campaigns, close to sources and in remote regions, to provide improved quantification of BC effects for use in climate policy.


2012 ◽  
Vol 12 (1) ◽  
pp. 2057-2113 ◽  
Author(s):  
M. G. Flanner ◽  
X. Liu ◽  
C. Zhou ◽  
J. E. Penner

Abstract. Here we explore light absorption by snowpack containing black carbon (BC) particles residing within ice grains. Basic considerations of particle volumes and BC/snow mass concentrations show that there are generally 0.05–109 BC particles for each ice grain. This suggests that internal BC is likely distributed as multiple inclusions within ice grains, and thus the dynamic effective medium approximation (DEMA) (Chýlek and Srivastava, 1983) is a more appropriate optical representation for BC/ice composites than coated-sphere or standard mixing approximations. DEMA calculations show that the 460 nm absorption cross-section of BC/ice composites, normalized to the mass of BC, is typically enhanced by factors of 1.8–2.1 relative to interstitial BC. BC effective radius is the dominant cause of variation in this enhancement, compared with ice grain size and BC volume fraction. We apply two atmospheric aerosol models that simulate interstitial and within-hydrometeor BC lifecycles. Although only ~2% of the atmospheric BC burden is cloud-borne, 71–83% of the BC deposited to global snow and sea-ice surfaces occurs within hydrometeors. Key processes responsible for within-snow BC deposition are development of hydrophilic coatings on BC, activation of liquid droplets, and subsequent snow formation through riming or ice nucleation by other species and aggregation/accretion of ice particles. Applying deposition fields from these aerosol models in offline snow and sea-ice simulations, we calculate that 32–73% of BC in global surface snow resides within ice grains. This fraction is smaller than the within-hydrometeor deposition fraction because meltwater flux preferentially removes internal BC, while sublimation and freezing within snowpack expose internal BC. Incorporating the DEMA into a global climate model, we simulate increases in BC/snow radiative forcing of 43–86%, relative to scenarios that apply external optical properties to all BC. We show that snow metamorphism driven by diffusive vapor transfer likely proceeds too slowly to alter the mass of internal BC while it is radiatively active, but neglected processes like wind pumping and convection may play much larger roles. These results suggest that a large portion of BC in surface snowpack may reside within ice grains and increase BC/snow radiative forcing, although measurements to evaluate this are lacking. Finally, previous studies of BC/snow forcing that neglected this absorption enhancement are not necessarily biased low, because of application of absorption-enhancing sulfate coatings to hydrophilic BC, neglect of coincident absorption by dust in snow, and implicit treatment of cloud-borne BC resulting in longer-range transport.


2011 ◽  
Vol 11 (2) ◽  
pp. 799-816 ◽  
Author(s):  
G. S. Jones ◽  
N. Christidis ◽  
P. A. Stott

Abstract. Past research has shown that the dominant influence on recent global climate changes is from anthropogenic greenhouse gas increases with implications for future increases in global temperatures. One mitigation proposal is to reduce black carbon aerosol emissions. How much warming can be offset by controlling black carbon is unclear, especially as its influence on past climate has not been previously unambiguously detected. In this study observations of near-surface warming over the last century are compared with simulations using a climate model, HadGEM1. In the simulations black carbon, from fossil fuel and bio-fuel sources (fBC), produces a positive radiative forcing of about +0.25 Wm−2 over the 20th century, compared with +2.52 Wm−2 for well mixed greenhouse gases. A simulated warming of global mean near-surface temperatures over the twentieth century from fBC of 0.14 ± 0.1 K compares with 1.06 ± 0.07 K from greenhouse gases, −0.58 ± 0.10 K from anthropogenic aerosols, ozone and land use changes and 0.09 ± 0.09 K from natural influences. Using a detection and attribution methodology, the observed warming since 1900 has detectable influences from anthropogenic and natural factors. Fossil fuel and bio-fuel black carbon is found to have a detectable contribution to the warming over the last 50 yr of the 20th century, although the results are sensitive to the period being examined as fBC is not detected for the later fifty year period ending in 2006. The attributed warming of fBC was found to be consistent with the warming from fBC unscaled by the detection analysis. This study suggests that there is a possible significant influence from fBC on global temperatures, but its influence is small compared to that from greenhouse gas emissions.


2017 ◽  
Vol 4 (2) ◽  
pp. 119 ◽  
Author(s):  
Zinatul Uthbah ◽  
Eming Sudiana ◽  
Edy Yani

Increased carbon dioxide in the atmosphere causes global climate change seriously. Forests serve as an important asset that can absorb and store carbon in the form of biomass. One type of potential forest as a carbon sink is forests resin. The amount of carbon stored by standing very dynamic and varies according to the age of its standing. Therefore, studies will be needed to determine the effect of age on biomass and carbon stocks stands resin, determine the relationship between age and standing biomass and carbon stocks resin, and knowing the optimum resin stand age in storing biomass and carbon stocks. This research was conducted at the stands of resin RPH Karang Gandul, KPH Banyumas Timur for four weeks in May 2016. The method used is a survey with a sampling technique using cluster random sampling. Stands resin used in the study were classified into five age groups with 5 replicates. Data were analyzed using ANOVA with an error rate of 5% and continued with LSD for further test results were significant and regression analysis to determine the relationship of age with biomass and carbon stocks stands resin. The results showed that the age effect on biomass and carbon stocks stands resin, the relationship formed between the age of stand with biomass and carbon stocks are quadratic, and age optimum in storing biomass and carbon stocks is 35 years.


2014 ◽  
Vol 14 (14) ◽  
pp. 20083-20115 ◽  
Author(s):  
B. H. Samset ◽  
G. Myhre ◽  
A. Herber ◽  
Y. Kondo ◽  
S.-M. Li ◽  
...  

Abstract. Atmospheric black carbon (BC) absorbs solar radiation, and exacerbates global warming through exerting positive radiative forcing (RF). However, the contribution of BC to ongoing changes in global climate is under debate. Anthropogenic BC emissions, and the resulting distribution of BC concentration, are highly uncertain. In particular, long range transport and processes affecting BC atmospheric lifetime are poorly understood. Here we discuss whether recent assessments may have overestimated present day BC radiative forcing in remote regions. We compare vertical profiles of BC concentration from four recent aircraft measurement campaigns to simulations by 13 aerosol models participating in the AeroCom Phase II intercomparision. An atmospheric lifetime of BC of less than 5 days is shown to be essential for reproducing observations in remote ocean regions, in line with other recent studies. Adjusting model results to measurements in remote regions, and at high altitudes, leads to a 25% reduction in AeroCom Phase II median direct BC forcing, from fossil fuel and biofuel burning, over the industrial era. The sensitivity of modeled forcing to BC vertical profile and lifetime highlights an urgent need for further flight campaigns, close to sources and in remote regions, to provide improved quantification of BC effects for use in climate policy.


Sign in / Sign up

Export Citation Format

Share Document