scholarly journals Implementation of a GPS-RO data processing system for the KIAPS-LETKF data assimilation system

2014 ◽  
Vol 7 (11) ◽  
pp. 11927-11956 ◽  
Author(s):  
H. Kwon ◽  
J.-S. Kang ◽  
Y. Jo ◽  
J. H. Kang
Keyword(s):  
Quality Control ◽  
Data Assimilation ◽  
Data Processing ◽  
Weather Prediction ◽  
Processing System ◽  
Data Processing System ◽  
Bending Angle ◽  
Quality Control Process ◽  
Data Assimilation System ◽  
Assimilation System

Abstract. The Korea Institute of Atmospheric Prediction Systems (KIAPS) has been developing a new global numerical weather prediction model and an advanced data assimilation system. As part of the KIAPS Package for Observation Processing (KPOP) system for data assimilation, preprocessing and quality control modules for bending angle measurements of global positioning system radio occultation (GPS-RO) data have been implemented and examined. GPS-RO data processing system is composed of several steps for checking observation locations, missing values, physical values for Earth radius of curvature, and geoid undulation. An observation-minus-background check is implemented by use of a one-dimensional observational bending angle operator and tangent point drift is also considered in the quality control process. We have tested GPS-RO observations utilized by the Korean Meteorological Administration (KMA) within KPOP, based on both the KMA global model and the National Center for Atmospheric Research (NCAR) Community Atmosphere Model-Spectral Element (CAM-SE) as a model background. Background fields from the CAM-SE model are incorporated for the preparation of assimilation experiments with the KIAPS-LETKF data assimilation system, which has been successfully implemented to a cubed-sphere model with fully unstructured quadrilateral meshes. As a result of data processing, the bending angle departure statistics between observation and background shows significant improvement. Also, the first experiment in assimilating GPS-RO bending angle resulting from KPOP within KIAPS-LETKF shows encouraging results.

scholarly journals Implementation of a GPS-RO data processing system for the KIAPS-LETKF data assimilation system

2015 ◽  
Vol 8 (3) ◽  
pp. 1259-1273 ◽  
Author(s):  
H. Kwon ◽  
J.-S. Kang ◽  
Y. Jo ◽  
J. H. Kang
Keyword(s):  
Quality Control ◽  
Data Assimilation ◽  
Data Processing ◽  
Weather Prediction ◽  
Processing System ◽  
Data Processing System ◽  
Bending Angle ◽  
Quality Control Process ◽  
Data Assimilation System ◽  
Assimilation System

Abstract. The Korea Institute of Atmospheric Prediction Systems (KIAPS) has been developing a new global numerical weather prediction model and an advanced data assimilation system. As part of the KIAPS package for observation processing (KPOP) system for data assimilation, preprocessing, and quality control modules for bending-angle measurements of global positioning system radio occultation (GPS-RO) data have been implemented and examined. The GPS-RO data processing system is composed of several steps for checking observation locations, missing values, physical values for Earth radius of curvature, and geoid undulation. An observation-minus-background check is implemented by use of a one-dimensional observational bending-angle operator, and tangent point drift is also considered in the quality control process. We have tested GPS-RO observations utilized by the Korean Meteorological Administration (KMA) within KPOP, based on both the KMA global model and the National Center for Atmospheric Research Community Atmosphere Model with Spectral Element dynamical core (CAM-SE) as a model background. Background fields from the CAM-SE model are incorporated for the preparation of assimilation experiments with the KIAPS local ensemble transform Kalman filter (LETKF) data assimilation system, which has been successfully implemented to a cubed-sphere model with unstructured quadrilateral meshes. As a result of data processing, the bending-angle departure statistics between observation and background show significant improvement. Also, the first experiment in assimilating GPS-RO bending angle from KPOP within KIAPS-LETKF shows encouraging results.

Assimilation of Global Positioning System Radio Occultation Observations into NCEP’s Global Data Assimilation System

2007 ◽  
Vol 135 (9) ◽  
pp. 3174-3193 ◽  
Author(s):  
L. Cucurull ◽  
J. C. Derber ◽  
R. Treadon ◽  
R. J. Purser
Keyword(s):  
Quality Control ◽  
Data Assimilation ◽  
Real Time ◽  
Radio Occultation ◽  
Environmental Modeling ◽  
Bending Angle ◽  
Preliminary Results ◽  
Data Assimilation System ◽  
Forward Operator ◽  
Assimilation System

Abstract The Constellation Observing System for Meteorology, Ionosphere, and Climate (COSMIC) mission launched six small satellites in April 2006, each carrying a GPS radio occultation (RO) receiver. At final orbit, COSMIC will provide ∼2500–3000 RO soundings per day uniformly distributed around the globe in near–real time. In preparation for the assimilation of COSMIC data in an operational framework, the NCEP/Environmental Modeling Center (EMC) has successfully developed the capability of assimilating profiles of refractivity and bending angle. Each forward operator has been implemented with its own quality control and error characterization. In this paper, the infrastructure developed at NCEP/EMC to assimilate GPS RO observations, including forward models, observational and representativeness errors, and quality control procedures, is described. The advantages of using a forward operator for bending angle versus refractivity are discussed and some preliminary results on the benefits of the GPS RO in weather analysis and forecasts are presented. The different strategies adopted at NCEP/EMC to assimilate GPS RO data are aimed to select the most appropriate forward operator in the operational data assimilation system when COSMIC products are stable and routinely available to the Numerical Weather Centers. In the meantime, data from the Challenging Minisatellite Payload (CHAMP) satellite is available in non–real time and has been used in the assimilation tests to examine the potential benefits of the GPS RO–derived products. In the preliminary results presented in this study, the use of GPS RO observations slightly improves anomaly correlation scores for temperature (by ∼0.01–0.03) in the Southern Hemisphere and Tropics throughout the depth of the atmosphere while a slight degradation is found in the upper troposphere and stratosphere in the Northern Hemisphere. However, significant reduction of the temperature and humidity biases is found for all latitudes. The benefits from assimilating GPS RO data also extend to other fields, such as 500-hPa geopotential heights and tropical winds, demonstrating the potential use of GPS RO data in operational forecasting.

scholarly journals Use of Microwave Radiances from Metop-C and Fengyun-3 C/D Satellites for a Northern European Limited-area Data Assimilation System

2021 ◽  
Author(s):  
Magnus Lindskog ◽  
Adam Dybbroe ◽  
Roger Randriamampianina
Keyword(s):  
Data Assimilation ◽  
Positive Impact ◽  
Weather Prediction ◽  
Implementation Process ◽  
Satellite System ◽  
Limited Area ◽  
Global Navigation Satellite ◽  
Microwave Radiances ◽  
Data Assimilation System ◽  
Assimilation System

AbstractMetCoOp is a Nordic collaboration on operational Numerical Weather Prediction based on a common limited-area km-scale ensemble system. The initial states are produced using a 3-dimensional variational data assimilation scheme utilizing a large amount of observations from conventional in-situ measurements, weather radars, global navigation satellite system, advanced scatterometer data and satellite radiances from various satellite platforms. A version of the forecasting system which is aimed for future operations has been prepared for an enhanced assimilation of microwave radiances. This enhanced data assimilation system will use radiances from the Microwave Humidity Sounder, the Advanced Microwave Sounding Unit-A and the Micro-Wave Humidity Sounder-2 instruments on-board the Metop-C and Fengyun-3 C/D polar orbiting satellites. The implementation process includes channel selection, set-up of an adaptive bias correction procedure, and careful monitoring of data usage and quality control of observations. The benefit of the additional microwave observations in terms of data coverage and impact on analyses, as derived using the degree of freedom of signal approach, is demonstrated. A positive impact on forecast quality is shown, and the effect on the precipitation for a case study is examined. Finally, the role of enhanced data assimilation techniques and adaptions towards nowcasting are discussed.

scholarly journals Implementation of a 3-D-Var system for atmospheric profiling data assimilation into the RAMS model: initial results

2013 ◽  
Vol 6 (2) ◽  
pp. 3581-3610
Author(s):  
S. Federico
Keyword(s):  
Relative Humidity ◽  
Data Assimilation ◽  
Initial Conditions ◽  
Weather Prediction ◽  
Wind Profiler ◽  
Short Term ◽  
Recursive Filters ◽  
Data Assimilation System ◽  
Rams Model ◽  
Assimilation System

Abstract. This paper presents the current status of development of a three-dimensional variational data assimilation system. The system can be used with different numerical weather prediction models, but it is mainly designed to be coupled with the Regional Atmospheric Modelling System (RAMS). Analyses are given for the following parameters: zonal and meridional wind components, temperature, relative humidity, and geopotential height. Important features of the data assimilation system are the use of incremental formulation of the cost-function, and the use of an analysis space represented by recursive filters and eigenmodes of the vertical background error matrix. This matrix and the length-scale of the recursive filters are estimated by the National Meteorological Center (NMC) method. The data assimilation and forecasting system is applied to the real context of atmospheric profiling data assimilation, and in particular to the short-term wind prediction. The analyses are produced at 20 km horizontal resolution over central Europe and extend over the whole troposphere. Assimilated data are vertical soundings of wind, temperature, and relative humidity from radiosondes, and wind measurements of the European wind profiler network. Results show the validity of the analysis solutions because they are closer to the observations (lower RMSE) compared to the background (higher RMSE), and the differences of the RMSEs are consistent with the data assimilation settings. To quantify the impact of improved initial conditions on the short-term forecast, the analyses are used as initial conditions of a three-hours forecast of the RAMS model. In particular two sets of forecasts are produced: (a) the first uses the ECMWF analysis/forecast cycle as initial and boundary conditions; (b) the second uses the analyses produced by the 3-D-Var scheme as initial conditions, then is driven by the ECMWF forecast. The improvement is quantified by considering the horizontal components of the wind, which are measured at a-synoptic times by the European wind profiler network. The results show that the RMSE is effectively reduced at the short range (1–2 h). The results are in agreement with the set-up of the numerical experiment.

scholarly journals SINGV‐DA: A data assimilation system for convective‐scale numerical weather prediction over Singapore

2020 ◽  
Vol 146 (729) ◽  
pp. 1923-1938 ◽  
Author(s):  
B. C. Peter Heng ◽  
Robert Tubbs ◽  
Xiang‐Yu Huang ◽  
Bruce Macpherson ◽  
Dale M. Barker ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Numerical Weather Prediction ◽  
Weather Prediction ◽  
Numerical Weather ◽  
Convective Scale ◽  
Data Assimilation System ◽  
Assimilation System

Forecast Impact of Assimilating Aircraft WVSS-II Water Vapor Mixing Ratio Observations in the Global Data Assimilation System (GDAS)

2017 ◽  
Vol 32 (4) ◽  
pp. 1603-1611 ◽  
Author(s):  
Brett T. Hoover ◽  
David A. Santek ◽  
Anne-Sophie Daloz ◽  
Yafang Zhong ◽  
Richard Dworak ◽  
...  
Keyword(s):  
Water Vapor ◽  
Data Assimilation ◽  
Positive Impact ◽  
Weather Prediction ◽  
Warm Season ◽  
Precipitation Forecast ◽  
Global Data Assimilation System ◽  
Data Assimilation System ◽  
Global Data ◽  
Assimilation System

Abstract Automated aircraft observations of wind and temperature have demonstrated positive impact on numerical weather prediction since the mid-1980s. With the advent of the Water Vapor Sensing System (WVSS-II) humidity sensor, the expanding fleet of commercial aircraft with onboard automated sensors is also capable of delivering high quality moisture observations, providing vertical profiles of moisture as aircraft ascend out of and descend into airports across the continental United States. Observations from the WVSS-II have to date only been monitored within the Global Data Assimilation System (GDAS) without being assimilated. In this study, aircraft moisture observations from the WVSS-II are assimilated into the GDAS, and their impact is assessed in the Global Forecast System (GFS). A two-season study is performed, demonstrating a statistically significant positive impact on both the moisture forecast and the precipitation forecast at short range (12–36 h) during the warm season. No statistically significant impact is observed during the cold season.

A Velocity Dealiasing Technique Using Rapidly Updated Analysis from a Four-Dimensional Variational Doppler Radar Data Assimilation System

2010 ◽  
Vol 27 (7) ◽  
pp. 1140-1152 ◽  
Author(s):  
Eunha Lim ◽  
Juanzhen Sun
Keyword(s):  
Data Assimilation ◽  
Doppler Radar ◽  
Weather Prediction ◽  
Radar Data ◽  
Objective Analysis ◽  
Doppler Velocity ◽  
Horizontal Shear ◽  
Data Assimilation System ◽  
Radar Data Assimilation ◽  
Assimilation System

Abstract A Doppler velocity dealiasing algorithm is developed within the storm-scale four-dimensional radar data assimilation system known as the Variational Doppler Radar Analysis System (VDRAS). The innovative aspect of the algorithm is that it dealiases Doppler velocity at each grid point independently by using three-dimensional wind fields obtained either from an objective analysis using conventional observations and mesoscale model output or from a rapidly updated analysis of VDRAS that assimilates radar data. This algorithm consists of three steps: preserving horizontal shear, global dealiasing using reference wind from the objective analysis or the VDRAS analysis, and local dealiasing. It is automated and intended to be used operationally for radar data assimilation using numerical weather prediction models. The algorithm was tested with 384 volumes of radar data observed from the Next Generation Weather Radar (NEXRAD) for a severe thunderstorm that occurred during 15 June 2002. It showed that the algorithm was effective in dealiasing large areas of aliased velocities when the wind from the objective analysis was used as the reference and that more accurate dealiasing was achieved by using the continuously cycled VDRAS analysis.

scholarly journals The Inclusion of IWV Estimates from AIRS/AMSU and SSM/I Sensors into the CPTEC/INPE Global Data Assimilation System

2013 ◽  
Vol 141 (1) ◽  
pp. 93-111
Author(s):  
Luiz F. Sapucci ◽  
Dirceu L. Herdies ◽  
Renata W. B. Mendonça
Keyword(s):  
Water Vapor ◽  
Data Assimilation ◽  
Southern Hemisphere ◽  
Short Range ◽  
Weather Forecasting ◽  
Weather Prediction ◽  
The Impact ◽  
Data Assimilation System ◽  
Assimilation System ◽  
Range Forecasts

Abstract Water vapor plays a crucial role in atmospheric processes and its distribution is associated with cloud-cover fraction and rainfall. The inclusion of integrated water vapor (IWV) estimates in numerical weather prediction improves the vertical structure of the humidity analysis and consequently contributes to obtaining a more realistic atmospheric state. Currently, satellite remote sensing is the most important source of humidity measurements in the Southern Hemisphere, providing information with good horizontal resolution and global coverage. In this study, the inclusion of IWV retrieved from the Atmospheric Infrared Sounder/Advanced Microwave Sounding Unit-A (AIRS/AMSU) and Special Sensor Microwave Imager (SSM/I) were investigated as additional information in the Physical-space Statistical Analysis System (PSAS), which is the operational data assimilation system at the Center for Weather Forecasting and Climate Studies of the Brazilian National Institute for Space Research (CPTEC/INPE). Experiments were carried out with and without the assimilation of IWV values from both sensors. Results show that, in general, the IWV assimilation reduces the error in short-range forecasts of humidity profile, particularly over tropical regions. In these experiments, an analysis of the impact of the inclusion of IWV values from SSM/I and AIRS/AMSU sensors was done. Results indicated that the impact of the SSM/I values is significant over high-latitude oceanic regions in the Southern Hemisphere, while the impact of AIRS/AMSU values is more significant over continental regions where surface measurements are scarce, such as the Amazonian region. In that area the assimilation of IWV values from the AIRS/AMSU sensor shows a tendency to reduce the overestimate of the precipitation in short-range forecasts.

Observing System Simulation Experiments (OSSEs) to Evaluate the Potential Impact of an Optical Autocovariance Wind Lidar (OAWL) on Numerical Weather Prediction

2015 ◽  
Vol 32 (9) ◽  
pp. 1593-1613 ◽  
Author(s):  
Robert Atlas ◽  
Ross N. Hoffman ◽  
Zaizhong Ma ◽  
G. David Emmitt ◽  
Sidney A. Wood ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Sampling Error ◽  
System Simulation ◽  
Weather Prediction ◽  
Simulation Experiments ◽  
Wind Lidar ◽  
Potential Impact ◽  
The Impact ◽  
Data Assimilation System ◽  
Assimilation System

AbstractThe potential impact of Doppler wind lidar (DWL) observations from a proposed optical autocovariance wind lidar (OAWL) instrument is quantified in observing system simulation experiments (OSSEs). The OAWL design would provide profiles of useful wind vectors along a ground track to the left of the International Space Station (ISS), which is in a 51.6° inclination low-Earth orbit (LEO). These observations are simulated realistically, accounting for cloud and aerosol distributions inferred from the OSSE nature runs (NRs), and measurement and sampling error sources. The impact of the simulated observations is determined in both global and regional OSSE frameworks. The global OSSE uses the ECMWF T511 NR and the NCEP operational Global Data Assimilation System at T382 resolution. The regional OSSE uses an embedded hurricane NR and the NCEP operational HWRF data assimilation system with outer and inner domains of 9- and 3-km resolution, respectively.The global OSSE results show improved analyses and forecasts of tropical winds and extratropical geopotential heights. The tropical wind RMSEs are significantly reduced in the analyses and in short-term forecasts. The tropical wind improvement decays as the forecasts lengthen. The regional OSSEs are limited but show some improvements in hurricane track and intensity forecasts.

Sign in / Sign up

Export Citation Format

Share Document