Impact of fault fracture development and distribution regularity on groundwater flow and solute transport in rock mass as exemplified at 3720 m of the first mining region of Pulang Copper Mine, SW China

Author(s):  
Kexue Han ◽  
Rui Zuo ◽  
Zhukun He ◽  
Qiao Li

<p>Statistical analysis of development and distribution of fault fissures at 3720 m in the first mining region of Pulang Copper Mine, SW China was performed. Strongly heterogeneous hydro-geological numerical models influenced by fault fissures were set up. Effects of developmental distribution cracks on solute transport in 65° and 307°directions were simulated. Rock mass with strong permeability water-conducting fissure was found favorable for solute transport, water-blocking fault was found to inhibit solute transport. The direction of fracture development was found consistent with direction of groundwater flow, which would be beneficial for solute transport along water-flow direction. When direction of fracture development intersects with that of groundwater flow and the strong lens affected by fracture changes direction of groundwater flow, direction of solute transport is changed.</p>

Water ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1579
Author(s):  
Jie Song ◽  
Diyang Chen ◽  
Jing Wang ◽  
Yufeng Bi ◽  
Shang Liu ◽  
...  

The water inrush of the Shangjiawan karst tunnel is used to study the evolution pattern of precursor water inrush information in water-filled caves and to further reveal the matching mode of the information. The three-dimensional numerical method FLAC3D was used to simulate the evolution process of water inrush after damage to a water-blocking rock mass structure in a water-filled cave and to obtain the evolution pattern of precursor water-inrush information caused by the damage. The results show that the multifield response to the characteristic precursor information of the water-inrush pattern after the fracture of the water-blocking rock mass follows the order of stress-field displacement-field seepage-field. Further, the matching pattern of the information shows that the stress field increased first and then decreased, the displacement field always increased, and the seepage field increased first and then decreased.


2011 ◽  
Vol 90-93 ◽  
pp. 2033-2036 ◽  
Author(s):  
Jin Shan Sun ◽  
Hong Jun Guo ◽  
Wen Bo Lu ◽  
Qing Hui Jiang

The factors affecting the TBM tunnel behavior in jointed rock mass is investigated. In the numerical models the concrete segment lining of TBM tunnel is concerned, which is simulated as a tube neglecting the segment joint. And the TBM tunnel construction process is simulate considering the excavation and installing of the segment linings. Some cases are analyzed with different joint orientation, joint spacing, joint strength and tunnel depth. The results show that the shape and areas of loosing zones of the tunnel are influenced by the parameters of joint sets and in-situ stress significantly, such as dip angle, spacing, strength, and the in-situ stress statement. And the stress and deformation of the tunnel lining are influenced by the parameters of joint sets and in-situ stress, too.


2021 ◽  
Author(s):  
Liqun Jiang ◽  
Ronglin Sun ◽  
Xing Liang

<p>Protection and management of groundwater resources demand high-resolution distributions of hydraulic parameters (e.g., hydraulic conductivity (K) and specific storage (Ss)) of aquifers. In the past, these parameters were obtained by traditional analytical solutions (e.g., Theis (1935) or Cooper and Jacob (1946)). However, traditional methods assume the aquifer to be homogeneous and yield the equivalent parameter, which are averages over a large volume and are insufficient for predicting groundwater flow and solute transport process (Butler & Liu, 1993). For obtaining the aquifer heterogeneity, some scholars have used kriging (e.g., Illman et al., 2010) and hydraulic tomography (HT) (e.g., Yeh & Liu, 2000; Zhu & Yeh, 2005) to describe the K distribution.</p><p>In this study, the laboratory heterogeneous aquifer sandbox is used to investigate the effect of different hydraulic parameter estimation methods on predicting groundwater flow and solute transport process. Conventional equivalent homogeneous model, kriging and HT are used to characterize the heterogeneity of sandbox aquifer. A number of the steady-state head data are collected from a series of single-hole pumping tests in the lab sandbox, and are then used to estimate the K fields of the sandbox aquifer by the steady-state inverse modeling in HT survey which was conducted using the SimSLE algorithm (Simultaneous SLE, Xiang et al., 2009), a built-in function of the software package of VSAFT2. The 40 K core samples from the sandbox aquifer are collected by the Darcy experiments, and are then used to obtain K fields through kriging which was conducted using the software package of Surfer 13. The role of prior information on improving HT survey is then discussed. The K estimates by different methods are used to predict the process of steady-state groundwater flow and solute transport, and evaluate the merits and demerits of different methods, investigate the effect of aquifer heterogeneity on groundwater flow and solute transport.</p><p>According to lab sandbox experiments results, we concluded that compared with kriging, HT can get higher precision to characterize the aquifer heterogeneity and predict the process of groundwater flow and solute transport. The 40 K fields from the K core samples are used as priori information of HT survey can promote the accuracy of K estimates. The conventional equivalent homogeneous model cannot accurately predict the process of groundwater flow and solute transport in heterogeneous aquifer. The enhancement of aquifer heterogeneity will lead to the enhancement of the spatial variability of tracer distribution and migration path, and the dominant channel directly determines the migration path and tracer distribution.</p>


2021 ◽  
Author(s):  
Goedele Verreydt ◽  
Niels Van Putte ◽  
Timothy De Kleyn ◽  
Joris Cool ◽  
Bino Maiheu

<p>Groundwater dynamics play a crucial role in the spreading of a soil and groundwater contamination. However, there is still a big gap in the understanding of the groundwater flow dynamics. Heterogeneities and dynamics are often underestimated and therefore not taken into account. They are of crucial input for successful management and remediation measures. The bulk of the mass of mass often is transported through only a small layer or section within the aquifer and is in cases of seepage into surface water very dependent to rainfall and occurring tidal effects.</p><p> </p><p>This study contains the use of novel real-time iFLUX sensors to map the groundwater flow dynamics over time. The sensors provide real-time data on groundwater flow rate and flow direction. The sensor probes consist of multiple bidirectional flow sensors that are superimposed. The probes can be installed directly in the subsoil, riverbed or monitoring well. The measurement setup is unique as it can perform measurements every second, ideal to map rapid changing flow conditions. The measurement range is between 0,5 and 500 cm per day.</p><p> </p><p>We will present the measurement principles and technical aspects of the sensor, together with two case studies.</p><p> </p><p>The first case study comprises the installation of iFLUX sensors in 4 different monitoring wells in a chlorinated solvent plume to map on the one hand the flow patterns in the plume, and on the other hand the flow dynamics that are influenced by the nearby popular trees. The foreseen remediation concept here is phytoremediation. The sensors were installed for a period of in total 4 weeks. Measurement frequency was 5 minutes. The flow profiles and time series will be presented together with the determined mass fluxes.</p><p> </p><p>A second case study was performed on behalf of the remediation of a canal riverbed. Due to industrial production of tar and carbon black in the past, the soil and groundwater next to the small canal ‘De Lieve’ in Ghent, Belgium, got contaminated with aliphatic and (poly)aromatic hydrocarbons. The groundwater contaminants migrate to the canal, impact the surface water quality and cause an ecological risk. The seepage flow and mass fluxes of contaminants into the surface water were measured with the novel iFLUX streambed sensors, installed directly in the river sediment. A site conceptual model was drawn and dimensioned based on the sensor data. The remediation concept to tackle the inflowing pollution: a hydraulic conductive reactive mat on the riverbed that makes use of the natural draining function of the waterbody, the adsorption capacity of a natural or secondary adsorbent and a future habitat for micro-organisms that biodegrade contaminants. The reactive mats were successfully installed and based on the mass flux calculations a lifespan of at least 10 years is expected for the adsorption material.  </p>


Sign in / Sign up

Export Citation Format

Share Document