Characterization of near-surface turbulence in the stable atmosphere of the Alpine Inn Valley

Author(s):  
Manuela Lehner ◽  
Mathias W. Rotach

<p>The stable boundary layer is typically characterized by weak and sometimes intermittent turbulence, particularly under very stable conditions. In mountain valleys, nocturnal temperature inversions and cold-air pools form frequently under synoptically undisturbed and clear-sky conditions, which will dampen turbulence. On the other hand, thermally driven slope and valley winds form under the same conditions, which interact with each other and are both characterized by jet-like wind profiles, thus resulting in both horizontal and vertical wind shear, which creates a persistent source for turbulence production. Data will be presented from six flux towers in the Austrian Inn Valley, which are part of the i-Box measurement platform, designed to study near-surface turbulence in complex, mountainous terrain. The six sites are located within an approximately 6.5-km long section of the 2-3-km wide valley approximately 20 km east of Innsbruck. The data are analyzed to characterize the strength and intermittency of turbulence kinetic energy and turbulent fluxes across the valley and to determine whether the persistent wind shear associated with thermally driven flows is sufficient to generate continuous turbulence.</p>

Author(s):  
Abdullah Ali ◽  
Riris Adrianto ◽  
Miming Saepudin

One of the weather phenomena that potentially cause extreme weather conditions is the linear-shaped mesoscale convective systems, including squall lines. The phenomenon that can be categorized as a squall line is a convective cloud pair with the linear pattern of more than 100 km length and 6 hours lifetime. The new theory explained that the cloud system with the same morphology as squall line without longevity threshold. Such a cloud system is so-called Quasi-Linear Convective System (QLCS), which strongly influenced by the ambient dynamic processes, include horizontal and vertical wind profiles. This research is intended as a preliminary study for horizontal and vertical wind profiles of QLCS developed over the Western Java region utilizing Doppler weather radar. The following parameters were analyzed in this research, include direction pattern and spatial-temporal significance of wind speed, divergence profile, vertical wind shear (VWS) direction, and intensity profiles, and vertical velocity profile. The subjective and objective analysis was applied to explain the characteristics and effects of those parameters to the orientation of propagation, relative direction, and speed of the cloud system’s movement, and the lifetime of the system. Analysis results showed that the movement of the system was affected by wind direction and velocity patterns. The divergence profile combined with the vertical velocity profile represents the inflow which can supply water vapor for QLCS convective cloud cluster. Vertical wind shear that effect QLCS system is only its direction relative to the QLCS propagation, while the intensity didn’t have a significant effect.


2020 ◽  
Vol 77 (5) ◽  
pp. 1865-1885 ◽  
Author(s):  
Qingfang Jiang

Abstract The influence of swell on turbulence and scalar profiles in a marine surface layer and underlying physics is examined in this study through diagnosis of large-eddy simulations (LES) that explicitly resolve the surface layer and underlying swell. In general, under stable conditions, the mean wind and scalar profiles can be significantly modified by swell. The influence of swell on wind shear, turbulence structure, scalar profiles, and evaporation duct (ED) characteristics becomes less pronounced in a more convective boundary layer, where the buoyancy production of turbulence is significant. Dynamically, swell has little direct impact on scalar profiles. Instead it modifies the vertical wind shear by exerting pressure drag on the wave boundary layer. The resulting redistribution of vertical wind shear leads to changes in turbulence production and therefore turbulence mixing of scalars. Over swell, the eddy diffusivities from LES systematically deviate from the Monin–Obukhov similarity theory (MOST) prediction, implying that MOST becomes invalid over a swell-dominated sea. The deviations from MOST are more pronounced in a neutral or stable boundary layer under relatively low winds and less so in a convective boundary layer.


Author(s):  
Benjamin A. Schenkel ◽  
Michael Coniglio ◽  
Roger Edwards

AbstractThis work investigates how the relationship between tropical cyclone (TC) tornadoes and ambient (i.e., synoptic-scale) deep-tropospheric (i.e., 850–200-hPa) vertical wind shear (VWS) varies between coastal and inland environments. Observed U.S. TC tornado track data are used to study tornado frequency and location, while dropsonde and radiosonde data are used to analyze convective-scale environments. To study the variability in the TC tornado-VWS relationship, these data are categorized by both: 1) their distance from the coast and 2) reanalysis-derived VWS magnitude. The analysis shows that TCs produce coastal tornadoes regardless of VWS magnitude primarily in their downshear sector, with tornadoes most frequently occurring in strongly sheared cases. Inland tornadoes, including the most damaging cases, primarily occur in strongly sheared TCs within the outer radii of the downshear right quadrant. Consistent with these patterns, drop-sondes and coastal radiosondes show that the downshear right quadrant of strongly sheared TCs has the most favorable combination of enhanced lower-tropospheric near-surface speed shear and veering, and reduced lower-tropospheric thermodynamic stability for tornadic supercells. Despite the weaker intensity further inland, these kinematic conditions are even more favorable in inland environments within the downshear right quadrant of strongly sheared TCs, due to the strengthened veering of the ambient winds and the lack of changes in the TC outer tangential wind strength. The constructive superposition of the ambient and TC winds may be particularly important to inland tornado occurrence. Together, these results will allow forecasters to anticipate how the frequency and location of tornadoes and, more broadly, convection may change as TCs move inland.


2013 ◽  
Vol 70 (3) ◽  
pp. 767-793 ◽  
Author(s):  
Andrew J. Oberthaler ◽  
Paul M. Markowski

Abstract Numerical simulations are used to investigate how the attenuation of solar radiation by the intervening cumulonimbus cloud, particularly its large anvil, affects the structure, intensity, and evolution of quasi-linear convective systems and the sensitivity of the effects of this “anvil shading” to the ambient wind profile. Shading of the pre-gust-front inflow environment (as opposed to shading of the cold pool) has the most important impact on the convective systems. The magnitude of the low-level cooling, associated baroclinicity, and stabilization of the pre-gust-front environment due to anvil shading generally increases as the duration of the shading increases. Thus, for a given leading anvil length, a slow-moving convective system tends to be affected more by anvil shading than does a fast-moving convective system. Differences in the forward speeds of the convective systems simulated in this study are largely attributable to differences in the mean environmental wind speed over the depth of the troposphere. Anvil shading reduces the buoyancy realized by the air parcels that ascend through the updrafts. As a result, anvil shading contributes to weaker updrafts relative to control simulations in which clouds are transparent to solar radiation. Anvil shading also affects the convective systems by modifying the low-level (nominally 0–2.5 km AGL) vertical wind shear in the pre-gust-front environment. The shear modifications affect the slope of the updraft region and system-relative rear-to-front flow, and the sign of the modifications is sensitive to the ground-relative vertical wind profile in the far-field environment. The vertical wind shear changes are brought about by baroclinic vorticity generation associated with the horizontal buoyancy gradient that develops in the shaded boundary layer (which makes the pre-gust-front, low-level vertical wind shear less westerly) and by a reduction of the vertical mixing of momentum due to the near-surface (nominally 0–300 m AGL) stabilization that accompanies the shading-induced cooling. The reduced mixing makes the pre-gust-front, low-level vertical shear more (less) westerly if the ambient, near-surface wind and wind shear are westerly (easterly).


2013 ◽  
Vol 71 (1) ◽  
pp. 243-275 ◽  
Author(s):  
Paul M. Markowski ◽  
Yvette P. Richardson

Abstract Idealized, dry simulations are used to investigate the roles of environmental vertical wind shear and baroclinic vorticity generation in the development of near-surface vortices in supercell-like “pseudostorms.” A cyclonically rotating updraft is produced by a stationary, cylindrical heat source imposed within a horizontally homogeneous environment containing streamwise vorticity. Once a nearly steady state is achieved, a heat sink, which emulates the effects of latent cooling associated with precipitation, is activated on the northeastern flank of the updraft at low levels. Cool outflow emanating from the heat sink spreads beneath the updraft and leads to the development of near-surface vertical vorticity via the “baroclinic mechanism,” as has been diagnosed or inferred in actual supercells that have been simulated and observed. An intense cyclonic vortex forms in the simulations in which the environmental low-level wind shear is strong and the heat sink is of intermediate strength relative to the other heat sinks tested. Intermediate heat sinks result in the development (baroclinically) of substantial near-surface circulation, yet the cold pools are not excessively strong. Moreover, the strong environmental low-level shear lowers the base of the midlevel mesocyclone, which promotes strong dynamic lifting of near-surface air that previously resided in the heat sink. The superpositioning of the dynamic lifting and circulation-rich, near-surface air having only weak negative buoyancy facilitates near-surface vorticity stretching and vortex genesis. An intense cyclonic vortex fails to form in simulations in which the heat sink is excessively strong or weak or if the low-level environmental shear is weak.


2020 ◽  
Vol 35 (5) ◽  
pp. 2033-2059
Author(s):  
Benjamin A. Schenkel ◽  
Roger Edwards ◽  
Michael Coniglio

AbstractThe cyclone-relative location and variability in the number of tornadoes among tropical cyclones (TCs) are not completely understood. A key understudied factor that may improve our understanding is ambient (i.e., synoptic-scale) deep-tropospheric (i.e., 850–200-hPa) vertical wind shear (VWS), which impacts both the symmetry and strength of deep convection in TCs. This study conducts a climatological analysis of VWS impacts upon tornadoes in TCs from 1995 to 2018, using observed TC and tornado data together with radiosondes. TC tornadoes were classified by objectively defined VWS categories, derived from reanalyses, to quantify the sensitivity of tornado frequency, location, and their environments to VWS. The analysis shows that stronger VWS is associated with enhanced rates of tornado production—especially more damaging ones. Tornadoes also become localized to the downshear half of the TC as VWS strengthens, with tornado location in strongly sheared TCs transitioning from the downshear-left quadrant in the TC inner core to the downshear-right quadrant in the TC outer region. Analysis of radiosondes shows that the downshear-right quadrant in strongly sheared TCs is most frequently associated with sufficiently strong near-surface speed shear and veering aloft, and lower-tropospheric thermodynamic instability for tornadoes. These supportive kinematic environments may be due to the constructive superposition of the ambient and TC winds, and the VWS-induced downshear enhancement of the TC circulation among other factors. Together, this work provides a basis for improving forecasts of TC tornado frequency and location.


2011 ◽  
Vol 2011 ◽  
pp. 1-12 ◽  
Author(s):  
Daisuke Seto ◽  
Craig B. Clements

This observational study documented the atmospheric environment of a prescribed fire conducted in a narrow valley when a small fire whirl developed during a mesoscale wind reversal. Based on analysis of in situ meteorological measurements, it is hypothesized that the fire whirl formed due to the presence of strong vertical wind shear caused by the interaction of a sea breeze front with a weaker up-valley wind. Vorticity generated by the interaction of the wind shear and the fire front was estimated to be ~0.2 s−1. Peak turbulence kinetic energy was caused by the wind shear rather than the buoyancy generated by the fire front. It was also found that the convective Froude number itself may not be sufficient for fire whirl prediction since it is less relevant to the near-surface boundary-layer turbulence generated by environmental wind shear. Observations from this case study indicate that even low-intensity prescribed fires can result in the formation of fire whirls due to mesoscale changes in the ambient atmospheric environment.


2017 ◽  
Vol 10 (9) ◽  
pp. 3385-3402 ◽  
Author(s):  
Pauline Martinet ◽  
Domenico Cimini ◽  
Francesco De Angelis ◽  
Guylaine Canut ◽  
Vinciane Unger ◽  
...  

Abstract. A RPG-HATPRO ground-based microwave radiometer (MWR) was operated in a deep Alpine valley during the Passy-2015 field campaign. This experiment aims to investigate how stable boundary layers during wintertime conditions drive the accumulation of pollutants. In order to understand the atmospheric processes in the valley, MWRs continuously provide vertical profiles of temperature and humidity at a high time frequency, providing valuable information to follow the evolution of the boundary layer. A one-dimensional variational (1DVAR) retrieval technique has been implemented during the field campaign to optimally combine an MWR and 1 h forecasts from the French convective scale model AROME. Retrievals were compared to radiosonde data launched at least every 3 h during two intensive observation periods (IOPs). An analysis of the AROME forecast errors during the IOPs has shown a large underestimation of the surface cooling during the strongest stable episode. MWR brightness temperatures were monitored against simulations from the radiative transfer model ARTS2 (Atmospheric Radiative Transfer Simulator) and radiosonde launched during the field campaign. Large errors were observed for most transparent channels (i.e., 51–52 GHz) affected by absorption model and calibration uncertainties while a good agreement was found for opaque channels (i.e., 54–58 GHz). Based on this monitoring, a bias correction of raw brightness temperature measurements was applied before the 1DVAR retrievals. 1DVAR retrievals were found to significantly improve the AROME forecasts up to 3 km but mainly below 1 km and to outperform usual statistical regressions above 1 km. With the present implementation, a root-mean-square error (RMSE) of 1 K through all the atmospheric profile was obtained with values within 0.5 K below 500 m in clear-sky conditions. The use of lower elevation angles (up to 5°) in the MWR scanning and the bias correction were found to improve the retrievals below 1000 m. MWR retrievals were found to catch deep near-surface temperature inversions very well. Larger errors were observed in cloudy conditions due to the difficulty of ground-based MWRs to resolve high level inversions that are still challenging. Finally, 1DVAR retrievals were optimized for the analysis of the IOPs by using radiosondes as backgrounds in the 1DVAR algorithm instead of the AROME forecasts. A significant improvement of the retrievals in cloudy conditions and below 1000 m in clear-sky conditions was observed. From this study, we can conclude that MWRs are expected to bring valuable information into numerical weather prediction models up to 3 km in altitude both in clear-sky and cloudy-sky conditions with the maximum improvement found around 500 m. With an accuracy between 0.5 and 1 K in RMSE, our study has also proven that MWRs are capable of resolving deep near-surface temperature inversions observed in complex terrain during highly stable boundary layer conditions.


2018 ◽  
Vol 75 (12) ◽  
pp. 4149-4173 ◽  
Author(s):  
Rosimar Rios-Berrios ◽  
Christopher A. Davis ◽  
Ryan D. Torn

Abstract A major open issue in tropical meteorology is how and why some tropical cyclones intensify under moderate vertical wind shear. This study tackles that issue by diagnosing physical processes of tropical cyclone intensification in a moderately sheared environment using a 20-member ensemble of idealized simulations. Consistent with previous studies, the ensemble shows that the onset of intensification largely depends on the timing of vortex tilt reduction and symmetrization of precipitation. A new contribution of this work is a process-based analysis following a shear-induced midtropospheric vortex with its associated precipitation. This analysis shows that tilt reduction and symmetrization precede intensification because those processes are associated with a substantial increase in near-surface vertical mass fluxes and equivalent potential temperature. A vorticity budget demonstrates that the increased near-surface vertical mass fluxes aid intensification via near-surface stretching of absolute vorticity and free-tropospheric tilting of horizontal vorticity. Importantly, tilt reduction happens because of a vortex merger process—not because of advective vortex alignment—that yields a single closed circulation over a deep layer. Vortex merger only happens after the midtropospheric vortex reaches upshear left, where the flow configuration favors near-surface vortex stretching, deep updrafts, and a substantial reduction of low-entropy fluxes. These results lead to the hypothesis that intensification under moderate shear happens if and when a “restructuring” process is completed, after which a closed circulation favors persistent vorticity spinup and recirculating warm, moist air parcels.


Sign in / Sign up

Export Citation Format

Share Document