Multi-temporal analysis of optical remote sensing for time-series displacement of gravitational mass movements, Sattelkar, Obersulzbach Valley, Austria

2021 ◽  
Author(s):  
Doris Hermle ◽  
Michele Gaeta ◽  
Markus Keuschnig ◽  
Paolo Mazzanti ◽  
Michael Krautblatter
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Ground Motion ◽  
Spatial Resolution ◽  
Satellite Data ◽  
Hot Spot ◽  
Gravitational Mass ◽  
Image Correlation ◽  
Mass Movements ◽  
Optical Remote Sensing

<p>Remote sensing for natural hazard assessment and applications offers data on even vast areas, often difficult and dangerous to access. Today, satellite data providers such as PlanetLabs Inc. and the European Copernicus program provide a sub-weekly acquisition frequency of high resolution multispectral imagery. The availability of this high temporal data density suggests that the detection of short-term changes is possible; however, limitations of this data regarding qualitative, spatiotemporal reliability for the early warning of gravitational mass movements have not been analysed and extensively tested.</p><p>This study analyses the effective detection and monitoring potential of PlanetScope Ortho Tiles (3.125 m, daily revisit rate) and Sentinel-2 (10 m, 5-day revisit) satellite imagery between 2018 and 2020. These results are compared to high accuracy UAS orthoimages (0.16 m, 5 acquisitions from 2018-2020). The analysis is conducted based on digital image correlation (DIC) using COSI-Corr (Caltech), a well-established software and the newly developed IRIS (NHAZCA). The mass wasting processes in a steep, glacially-eroded, high alpine cirque, Sattelkar (2’130-2’730 m asl), Austria, are investigated. It is surrounded by a headwall of granitic gneiss with a cirque infill characterised by massive volumes of glacial and periglacial debris including rockfall deposits. Since 2003 the dynamics of these processes have been increased, and between 2012-2015 rates up to 30 m/a were observed.</p><p>Similar results are returned by the two software tools regarding hot-spot detection and signal-to-noise ratio; nonetheless IRIS results in an overall better detection, including a more delimitable ground motion area, with its iterative reference and secondary image combination. This analysis is supported by field investigations as well as clearly demarcated DIC-results from UAS imagery. Here, COSI-Corr shows limitations in the form of decorrelation and ambiguous velocity vectors due to high ground motion and surface changes for very high resolution of this input data. In contrast, IRIS performs better returning more coherent displacement rates. The results of both DIC tools for satellite images are affected by spatial resolution, data quality and imprecise image co-registration.</p><p>Knowledge of data potential and applicability is of high importance for a reliable and precise detection of gravitational mass movements. UAS data provides trustworthy, relative ground motion rates for moderate velocities and thus the possibility to draw conclusions regarding landslide processes. In contrast satellite data returns results which cannot always be clearly delimited due to spatial resolution, precision, and accuracy. Nevertheless, iterative calculations by IRIS improve the validity of the results.</p>

scholarly journals Super Resolution Digital Image Correlation (SR-DIC): an Alternative to Image Stitching at High Magnifications

2021 ◽  
Author(s):  
R. S. Hansen ◽  
D. W. Waldram ◽  
T. Q. Thai ◽  
R. B. Berke
Keyword(s):  
High Resolution ◽  
Digital Image Correlation ◽  
Spatial Resolution ◽  
Digital Image ◽  
Super Resolution ◽  
Image Correlation ◽  
Low Resolution ◽  
Strain Measurements ◽  
Resolution Image ◽  
High Resolution Image

Abstract Background High-resolution Digital Image Correlation (DIC) measurements have previously been produced by stitching of neighboring images, which often requires short working distances. Separately, the image processing community has developed super resolution (SR) imaging techniques, which improve resolution by combining multiple overlapping images. Objective This work investigates the novel pairing of super resolution with digital image correlation, as an alternative method to produce high-resolution full-field strain measurements. Methods First, an image reconstruction test is performed, comparing the ability of three previously published SR algorithms to replicate a high-resolution image. Second, an applied translation is compared against DIC measurement using both low- and super-resolution images. Third, a ring sample is mechanically deformed and DIC strain measurements from low- and super-resolution images are compared. Results SR measurements show improvements compared to low-resolution images, although they do not perfectly replicate the high-resolution image. SR-DIC demonstrates reduced error and improved confidence in measuring rigid body translation when compared to low resolution alternatives, and it also shows improvement in spatial resolution for strain measurements of ring deformation. Conclusions Super resolution imaging can be effectively paired with Digital Image Correlation, offering improved spatial resolution, reduced error, and increased measurement confidence.

Remote Sensing Image Mosaic Algorithm

2012 ◽  
Vol 500 ◽  
pp. 716-721
Author(s):  
Yi Ding Wang ◽  
Shuai Qin
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Hot Spot ◽  
Remote Sensing Image ◽  
Processing Algorithm ◽  
Geometric Features ◽  
Image Mosaic ◽  
Post Processing ◽  
Remote Sensing Images ◽  
Image Pixels

In the field of remote sensing, the acquirement of higher resolution of remote sensing images has become a hot spot issue with widely use of high resolution of remote sensing images. This paper focus on the characteristics of high resolution remote sensing images, on the basis of fully considerate of the correlation between geometric features and image pixels, bring forward a fusion of image mosaic processing algorithm. With this algorithm, the surface features can be well preserved after the processing of mosaic the remote sensing images, and the overlapping area can transit naturally, it will be better for the post-processing, analysis and application.

scholarly journals EXTRACTING BUILT-UP FEATURES IN COMPLEX BIOPHYSICAL ENVIRONMENTS BY USING A LANDSAT BANDS RATIO

2020 ◽  
Vol XLIV-M-2-2020 ◽  
pp. 79-85
Author(s):  
A. H. Ngandam Mfondoum ◽  
P. G. Gbetkom ◽  
R. Cooper ◽  
S. Hakdaoui ◽  
M. B. Mansour Badamassi
Keyword(s):  
Remote Sensing ◽  
Spatial Resolution ◽  
Satellite Data ◽  
Kappa Coefficient ◽  
Landsat 8 ◽  
Experimental Site ◽  
Soil Features ◽  
Mixed Pixels ◽  
Shortwave Infrared ◽  
Normalization Process

Abstract. This paper addresses the remote sensing challenging field of urban mixed pixels on a medium spatial resolution satellite data. The tentatively named Normalized Difference Built-up and Surroundings Unmixing Index (NDBSUI) is proposed by using Landsat-8 Operational Land Imager (OLI) bands. It uses the Shortwave Infrared 2 (SWIR2) as the main wavelength, the SWIR1 with the red wavelengths, for the built-up extraction. A ratio is computed based on the normalization process and the application is made on six cities with different urban and environmental characteristics. The built-up of the experimental site of Yaoundé is extracted with an overall accuracy of 95.51% and a kappa coefficient of 0.90. The NDBSUI is validated over five other sites, chosen according to Cameroon’s bioclimatic zoning. The results are satisfactory for the cities of Yokadouma and Kumba in the bimodal and monomodal rainfall zones, where overall accuracies are up to 98.9% and 97.5%, with kappa coefficients of 0.88 and 0.94 respectively, although these values are close to those of three other indices. However, in the cities of Foumban, Ngaoundéré and Garoua, representing the western highlands, the high Guinea savannah and the Sudano-sahelian zones where built-up is more confused with soil features, overall accuracies of 97.06%, 95.29% and 74.86%, corresponding to 0.918, 0.89 and 0.42 kappa coefficients were recorded. Difference of accuracy with EBBI, NDBI and UI are up to 31.66%, confirming the NDBSUI efficiency to automate built-up extraction and unmixing from surrounding noises with less biases.

scholarly journals Detection of Archaeological Looting from Space: Methods, Achievements and Challenges

2019 ◽  
Vol 11 (20) ◽  
pp. 2389 ◽  
Author(s):  
Deodato Tapete ◽  
Francesca Cigna
Keyword(s):  
Remote Sensing ◽  
Image Processing ◽  
High Resolution ◽  
Satellite Data ◽  
Satellite Images ◽  
Google Earth ◽  
Optical Data ◽  
Mena Region ◽  
Processing Methods ◽  
Optical Imagery

Illegal excavations in archaeological heritage sites (namely “looting”) are a global phenomenon. Satellite images are nowadays massively used by archaeologists to systematically document sites affected by looting. In parallel, remote sensing scientists are increasingly developing processing methods with a certain degree of automation to quantify looting using satellite imagery. To capture the state-of-the-art of this growing field of remote sensing, in this work 47 peer-reviewed research publications and grey literature are reviewed, accounting for: (i) the type of satellite data used, i.e., optical and synthetic aperture radar (SAR); (ii) properties of looting features utilized as proxies for damage assessment (e.g., shape, morphology, spectral signature); (iii) image processing workflows; and (iv) rationale for validation. Several scholars studied looting even prior to the conflicts recently affecting the Middle East and North Africa (MENA) region. Regardless of the method used for looting feature identification (either visual/manual, or with the aid of image processing), they preferred very high resolution (VHR) optical imagery, mainly black-and-white panchromatic, or pansharpened multispectral, whereas SAR is being used more recently by specialist image analysts only. Yet the full potential of VHR and high resolution (HR) multispectral information in optical imagery is to be exploited, with limited research studies testing spectral indices. To fill this gap, a range of looted sites across the MENA region are presented in this work, i.e., Lisht, Dashur, and Abusir el Malik (Egypt), and Tell Qarqur, Tell Jifar, Sergiopolis, Apamea, Dura Europos, and Tell Hizareen (Syria). The aim is to highlight: (i) the complementarity of HR multispectral data and VHR SAR with VHR optical imagery, (ii) usefulness of spectral profiles in the visible and near-infrared bands, and (iii) applicability of methods for multi-temporal change detection. Satellite data used for the demonstration include: HR multispectral imagery from the Copernicus Sentinel-2 constellation, VHR X-band SAR data from the COSMO-SkyMed mission, VHR panchromatic and multispectral WorldView-2 imagery, and further VHR optical data acquired by GeoEye-1, IKONOS-2, QuickBird-2, and WorldView-3, available through Google Earth. Commonalities between the different image processing methods are examined, alongside a critical discussion about automation in looting assessment, current lack of common practices in image processing, achievements in managing the uncertainty in looting feature interpretation, and current needs for more dissemination and user uptake. Directions toward sharing and harmonization of methodologies are outlined, and some proposals are made with regard to the aspects that the community working with satellite images should consider, in order to define best practices of satellite-based looting assessment.

Sign in / Sign up

Export Citation Format

Share Document