The CIMR mission and its unique capabilities for soil moisture sensing

2021 ◽  
Author(s):  
Maria Piles ◽  
Roberto Fernandez-Moran ◽  
Luis Gómez-Chova ◽  
Gustau Camps-Valls ◽  
Dara Entekhabi ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Spatial Scales ◽  
Microwave Radiometer ◽  
Critical Time ◽  
Global Scale ◽  
The Arctic ◽  
Temporal Perspective ◽  
Microwave Radiometers ◽  
Moisture Sensing

<p>The Copernicus Imaging Microwave Radiometer (CIMR) mission is currently being developed as a High Priority Copernicus Mission to support the Integrated European Policy for the Arctic. Due to its measurement characteristics, CIMR has exciting capabilities to enable a unique set of land surface products and science applications at a global scale. These characteristics go beyond what previous microwave radiometers (e.g. AMSR series, SMAP and SMOS) provide, and therefore allow for entirely new approaches to the estimation of bio-geophysical products from brightness temperature observations. Most notably, CIMR channels (L-,C-,X-,Ka-,Ku-bands) are very well fit for the simultaneous retrieval of soil moisture and vegetation properties, like biomass and moisture of different plant components such as leaves, stems or trunks. Also, the distinct spatial resolution of each frequency band allows for the development of approaches to cascade information and obtain these properties at multiple spatial scales. From a temporal perspective, CIMR has a higher revisit time than previous L-band missions dedicated to soil moisture monitoring (about 1 day global, sub-daily at the poles). This improved temporal resolution could allow resolving critical time scales of water processes, which is relevant to better model and understand land-atmosphere exchanges and feedbacks. In this presentation, new opportunities for soil moisture remote sensing made possible by the CIMR mission, as well as synergies and cross-sensor opportunities will be discussed.  </p>

scholarly journals The effect of climate type on timescales of drought propagation in an ensemble of global hydrological models

2018 ◽  
Vol 22 (9) ◽  
pp. 4649-4665 ◽  
Author(s):  
Anouk I. Gevaert ◽  
Ted I. E. Veldkamp ◽  
Philip J. Ward
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Spatial Scales ◽  
Standardized Precipitation Index ◽  
Meteorological Drought ◽  
Hydrological Drought ◽  
Propagation Time ◽  
Hydrological Models ◽  
Land Surface Models ◽  
Surface Models

Abstract. Drought is a natural hazard that occurs at many temporal and spatial scales and has severe environmental and socioeconomic impacts across the globe. The impacts of drought change as drought evolves from precipitation deficits to deficits in soil moisture or streamflow. Here, we quantified the time taken for drought to propagate from meteorological drought to soil moisture drought and from meteorological drought to hydrological drought. We did this by cross-correlating the Standardized Precipitation Index (SPI) against standardized indices (SIs) of soil moisture, runoff, and streamflow from an ensemble of global hydrological models (GHMs) forced by a consistent meteorological dataset. Drought propagation is strongly related to climate types, occurring at sub-seasonal timescales in tropical climates and at up to multi-annual timescales in continental and arid climates. Winter droughts are usually related to longer SPI accumulation periods than summer droughts, especially in continental and tropical savanna climates. The difference between the seasons is likely due to winter snow cover in the former and distinct wet and dry seasons in the latter. Model structure appears to play an important role in model variability, as drought propagation to soil moisture drought is slower in land surface models (LSMs) than in global hydrological models, but propagation to hydrological drought is faster in land surface models than in global hydrological models. The propagation time from SPI to hydrological drought in the models was evaluated against observed data at 127 in situ streamflow stations. On average, errors between observed and modeled drought propagation timescales are small and the model ensemble mean is preferred over the use of a single model. Nevertheless, there is ample opportunity for improvement as substantial differences in drought propagation are found at 10 % of the study sites. A better understanding and representation of drought propagation in models may help improve seasonal drought forecasting as well as constrain drought variability under future climate scenarios.

scholarly journals Global downscaling of remotely sensed soil moisture using neural networks

2018 ◽  
Vol 22 (10) ◽  
pp. 5341-5356 ◽  
Author(s):  
Seyed Hamed Alemohammad ◽  
Jana Kolassa ◽  
Catherine Prigent ◽  
Filipe Aires ◽  
Pierre Gentine
Keyword(s):  
Soil Moisture ◽  
Spatial Resolution ◽  
Land Surface ◽  
Vegetation Index ◽  
Spatial Scales ◽  
Ancillary Data ◽  
Repeat Time ◽  
Spatiotemporal Scales ◽  
Better Than

Abstract. Characterizing soil moisture at spatiotemporal scales relevant to land surface processes (i.e., of the order of 1 km) is necessary in order to quantify its role in regional feedbacks between the land surface and the atmospheric boundary layer. Moreover, several applications such as agricultural management can benefit from soil moisture information at fine spatial scales. Soil moisture estimates from current satellite missions have a reasonably good temporal revisit over the globe (2–3-day repeat time); however, their finest spatial resolution is 9 km. NASA's Soil Moisture Active Passive (SMAP) satellite has estimated soil moisture at two different spatial scales of 36 and 9 km since April 2015. In this study, we develop a neural-network-based downscaling algorithm using SMAP observations and disaggregate soil moisture to 2.25 km spatial resolution. Our approach uses the mean monthly Normalized Differenced Vegetation Index (NDVI) as ancillary data to quantify the subpixel heterogeneity of soil moisture. Evaluation of the downscaled soil moisture estimates against in situ observations shows that their accuracy is better than or equal to the SMAP 9 km soil moisture estimates.

scholarly journals Investigation of Arctic middle-atmospheric dynamics using 3 years of H<sub>2</sub>O and O<sub>3</sub> measurements from microwave radiometers at Ny-Ålesund

2019 ◽  
Author(s):  
Franziska Schranz ◽  
Brigitte Tschanz ◽  
Rolf Rüfenacht ◽  
Klemens Hocke ◽  
Mathias Palm ◽  
...  
Keyword(s):  
Water Vapour ◽  
Middle Atmosphere ◽  
Microwave Radiometer ◽  
Polar Vortex ◽  
The Arctic ◽  
High Time Resolution ◽  
Middle Atmospheric Dynamics ◽  
Wind Profiles ◽  
Microwave Radiometers

Abstract. We use 3 years of water vapour and ozone measurements to analyse dynamical events in the polar middle atmosphere such as sudden stratospheric warmings (SSW), polar vortex shifts, water vapour descent rates and periodicities. The measurements were performed with the two ground-based microwave radiometers MIAWARA-C and GROMOS-C which are co-located at the AWIPEV research base at Ny-Ålesund, Svalbard (79° N, 12° E) since September 2015. The almost continuous datasets of water vapour and ozone are characterised by a high time resolution in the order of hours. A thorough intercomparison of these datasets with models and measurements from satellite, ground-based and in-situ instruments was performed. In the upper stratosphere and lower mesosphere the MIAWARA-C profiles agree within 5 % with SD-WACCM simulations and ACE-FTS measurements whereas AuraMLS measurements show an average offset of 10–15 % depending on altitude but constant in time. Stratospheric GROMOS-C profiles are within 5 % of the satellite instruments AuraMLS and ACE-FTS and the ground-based microwave radiometer OZORAM which is also located at Ny-Ålesund. During these first three years of the measurement campaign typical phenomena of the Arctic middle atmosphere took place and we analysed their signatures in the water vapour and ozone datasets. Inside of the polar vortex in autumn we found the descent rate of mesospheric water vapour to be 435 m/day on average. In early 2017 distinct increases in mesospheric water vapour of about 2 ppm were observed when the polar vortex was displaced and midlatitude air was brought to Ny-Ålesund. Two major sudden stratospheric warmings took place in March 2016 and February 2018 where ozone enhancements of up to 4 ppm were observed. The zonal wind reversals accompanying a major SSW were captured in the GROMOS-C wind profiles which are retrieved from the ozone spectra. After the SSW in February 2018 the polar vortex re-established and the water vapour descent rate in the mesosphere was 355 m/day. In the water vapour and ozone time series signatures of atmospheric waves with periods close to 2, 5, 10 and 16 days were found.

An Integrated Variational Framework for Mapping Evapotranspiration by Assimilating GOES LST and SMAP data

2020 ◽  
Author(s):  
Leila farhadi ◽  
Abedeh Abdolghafoorian
Keyword(s):  
Soil Moisture ◽  
Great Plains ◽  
Land Surface ◽  
Water Cycle ◽  
Spatial Scales ◽  
Coupled Model ◽  
Balance Model ◽  
Parameter Estimates ◽  
Dynamic Feedback ◽  
Unknown Parameters

&lt;p&gt;Evapotranspiration (ET) is a key component of terrestrial water cycle that plays an important role in the Earth system. Aaccurate estimation of ET is crucial in various hydrological, meteorological, and agricultural applications. In situ measurements of ET are costly and cannot be readily scaled to regional scales relevant to weather and climate studies. Therefore, there is a need for techniques to make quantitative estimates of ET using land surface state observations that are widely available from remote sensing across a range of spatial scales.&lt;/p&gt;&lt;p&gt;In this work, A variational data (VDA) assimilation framework is developed to estimate ET by assimilating Soil Moisture Active Passive (SMAP) soil moisture and Geostationary Operational Environmental Satellite (GOES) land surface temperature data into a coupled dual-source energy and water balance model.&lt;/p&gt;&lt;p&gt;The VDA framework estimates the key parameters of the coupled model, which regulate the partitioning of available energy (i.e., neutral bulk heat transfer coefficient (CH&lt;sub&gt;N&lt;/sub&gt;) and evaporative fraction from soil (EF&lt;sub&gt;S&lt;/sub&gt;) and canopy (EF&lt;sub&gt;C&lt;/sub&gt;)). The uncertainties of the retrieved unknown parameters are estimated through the inverse of Hessian of cost function, obtained using the Lagrangian methodology. Analysis of the second-order information provides a tool to identify the optimum parameter estimates and guides towards a well-posed estimation problem.&lt;/p&gt;&lt;p&gt;The VDA framework is implemented&amp;#160;over an area of 21780 km&lt;sup&gt;2&lt;/sup&gt;&amp;#160;in the U.S. Southern Great Plains (with computational grid size of 0.05 degree) during a nine-month period. The maps of retrieved evaporation and transpiration are used to study a number of dynamic feedback mechanisms between the land and atmosphere, such as the dependence of evapotranspiration on vegetation and soil moisture.&lt;/p&gt;

scholarly journals A global analysis of satellite derived and DGVM surface soil moisture products

2011 ◽  
Vol 8 (2) ◽  
pp. 4281-4312
Author(s):  
K. T. Rebel ◽  
R. A. M. de Jeu ◽  
P. Ciais ◽  
N. Viovy ◽  
S. L. Piao ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Root Zone ◽  
Global Analysis ◽  
Single Layer ◽  
Global Scale ◽  
Rain Event ◽  
Deep Soil ◽  
Surface Climate ◽  
Soil Moisture Availability

Abstract. Soil moisture availability is important in regulating photosynthesis and controlling land surface-climate feedbacks at both the local and global scale. Recently, global remote-sensing datasets for soil moisture have become available. In this paper we assess the possibility of using remotely sensed soil moisture (AMSR-E) to evaluate the results of the process-based vegetation model ORCHIDEE during the period 2003–2004. We find that the soil moisture products of AMSR-E and ORCHIDEE correlate well, in particular when considering the root zone soil moisture of ORCHIDEE. However, the root zone soil moisture in ORCHIDEE consistently overestimated the temporal autocorrelation relative to AMSR-E and in situ measurements. This may be due to the different vertical depth of the two products, to the uncertainty in precipitation forcing in ORCHIDEE, and to the fact that the structure of ORCHIDEE consisting of a single-layer deep soil, does not allow simulation of the proper cascade of time scales that characterize soil drying after each rain event. We conclude that assimilating soil moisture in ORCHIDEE using AMSR-E with the current hydrological model may significantly improve the soil moisture dynamics in ORCHIDEE.

scholarly journals Required sampling-density of ground-based soil moisture and brightness temperature observations for calibration/validation of L-band satellite observations based on a virtual reality

2019 ◽  
Author(s):  
Shaoning Lv ◽  
Bernd Schalge ◽  
Pablo Saavedra Garfias ◽  
Clemens Simmer
Keyword(s):  
Soil Moisture ◽  
Brightness Temperature ◽  
Confidence Level ◽  
Land Surface ◽  
Microwave Remote Sensing ◽  
Global Scale ◽  
Microwave Emission ◽  
Near Surface ◽  
Temperature Observations ◽  
Better Than

Abstract. Microwave remote sensing is the most promising tool for monitoring global-scale near-surface soil moisture distributions. With the Soil Moisture and Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP) missions in orbit, considerable efforts are made to evaluate their soil moisture products via ground observations, forward microwave transfer simulation, and retrievals. Due to the large footprint of the satellite radiometers of about 40 km in diameter and the spatial heterogeneity of soil moisture, minimum sampling densities for soil moisture are required to challenge the targeted precision. Here we use 400 m resolution simulations with the regional terrestrial system model TerrSysMP and its coupling with the Community Microwave Emission Modelling platform (CMEM) to quantify sampling distance required for soil moisture and brightness temperature validation. Our analysis suggests that an overall sampling resolution of better than 6 km is required to validate the targeted accuracy of 0.04 cm3/cm3 (70 % confidence level) in SMOS and SMAP over typical midlatitude European regions. The minimum sampling resolution depends on the land-surface inhomogeneity and the meteorological situation, which influence the soil moisture patterns, and ranges from about 7 km to 17 km for a 70 % confidence level for a typical year. At the minimum sampling resolution for a 70 % confidence level also the accuracy of footprint-averaged brightness temperature estimates is equal or better than 15 K/10 K for H/V polarization. Estimates strongly deteriorate with sparser sampling densities, e.g., at 3/9 km with 3/5 sampling sites the confidence level of derived footprint estimates can reach about 0.5–0.6 for soil moisture which is much less than the standard 0.7 requirements for ground measurements. The representativeness of ground-based soil moisture and brightness temperature observations – and thus their required minimum sampling densities – are only weakly correlated in space and time. This study provides a basis for a better understanding of sometimes strong mismatches between derived satellite soil moisture products and ground-based measurements.

scholarly journals Toward seamless hydrologic predictions across scales

2017 ◽  
Author(s):  
Luis Samaniego ◽  
Rohini Kumar ◽  
Stephan Thober ◽  
Oldrich Rakovec ◽  
Matthias Zink ◽  
...  
Keyword(s):  
Land Surface ◽  
Spatial Scales ◽  
Matching Condition ◽  
Short Review ◽  
Global Scale ◽  
Specific Model ◽  
Rhine River ◽  
Hydrologic Models ◽  
Catchment Scale ◽  
Operational Models

Abstract. Land surface and hydrologic models (LSM/HM) are used at diverse spatial resolutions ranging from 1–10 km in catchment-scale applications to over 50 km in global-scale applications. Application of the same model structure at different spatial scales requires that the model estimates similar fluxes independent of the model resolution and fulfills a flux-matching condition across scales. An analysis of state-of-the-art LSMs and HMs reveals that most do not have consistent and realistic parameter fields for land surface geophysical properties. Multiple experiments with the mHM, Noah-MP, PCR-GLOBWB and WaterGAP models are conducted to demonstrate the pitfalls of poor parameterization practices currently used in most operational models, which are insufficient to satisfy the flux-matching condition. These examples demonstrate that J. Dooge's 1982 statement on the unsolved problem of parameterization in these models remains true. We provide a short review of existing parameter regionalization techniques and discuss a method for obtaining seamless hydrological predictions of water fluxes and states across multiple spatial resolutions. The multiscale parameter regionalization (MPR) technique is a practical and robust method that provides consistent (seamless) parameter and flux fields across scales. A general model protocol is presented to describe how MPR can be applied to a specific model, with an example of this application using the PCR-GLOBWB model. Applying MPR to PCR-GLOBWB substantially improves the flux-matching condition. Estimation of evapotranspiration without MPR at 5 arcmin and 30 arcmin spatial resolutions for the Rhine river basin results in a difference of approximately 29 %. Applying MPR reduce this difference to 9 %. For total soil water, the differences without and with MPR are 25 % and 7 %, respectively.

scholarly journals A Triple Collocation-Based Comparison of Three L-Band Soil Moisture Datasets, SMAP, SMOS-IC, and SMOS, Over Varied Climates and Land Covers

2021 ◽  
Vol 3 ◽  
Author(s):  
Seokhyeon Kim ◽  
Jianzhi Dong ◽  
Ashish Sharma
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Arid Regions ◽  
Water Cycle ◽  
Northern China ◽  
Global Scale ◽  
Retrieval Algorithm ◽  
Western Africa ◽  
L Band ◽  
Land Covers

Soil moisture plays an important role in the hydrologic water cycle. Relative to in-situ soil moisture measurements, remote sensing has been the only means of monitoring global scale soil moisture in near real-time over the past 40 years. Among these, soil moisture products from radiometry sensors operating at L-band, e.g., SMAP, SMOS, and SMOS-IC, are theoretically established to be more advantageous than previous C/X-band products. However, little effort has been made to investigate the inter-product differences of L-band soil moisture retrievals and provide insights into the optimal use of these products. In this regard, this study aims to identify the relative strengths and weaknesses of three L-band soil moisture products across diverse climate zones and land covers at the global scale using triple collocation analysis. Results show that SMOS-IC exhibits significantly improved soil moisture estimation skills, relative to the original SMOS product. This demonstrates the paramount importance of retrieval algorithm development in improving global soil moisture estimates—given both SMOS-IC and SMOS are using the same L-band brightness temperature information. Relative to SMOS-IC, SMAP is superior across 69% of global land surface in terms of error variances. However, SMOS-IC tends to outperform SMAP over temperate/arid regions including in the east of North America, South America, western Africa, northern China, and central Australia. Additionally, considerable performance degradation of all the L-band data products is observed over unvegetated areas. This may suggest that improving soil moisture retrieval accuracy over arid and semi-arid regions should be a key priority for future L-band soil moisture development, and model-based (e.g., GLDAS) soil moisture products appear to provide more accurate soil moisture estimates over these regions.

scholarly journals A reduced-order modeling approach to represent subgrid-scale hydrological dynamics for land-surface simulations: application in a polygonal tundra landscape

2014 ◽  
Vol 7 (5) ◽  
pp. 2091-2105 ◽  
Author(s):  
G. S. H. Pau ◽  
G. Bisht ◽  
W. J. Riley
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Spatial Scales ◽  
Approximation Error ◽  
Reduced Order Modeling ◽  
Data Set ◽  
Reduced Order ◽  
Coarse Resolution ◽  
Wide Range ◽  
Study Sites

Abstract. Existing land surface models (LSMs) describe physical and biological processes that occur over a wide range of spatial and temporal scales. For example, biogeochemical and hydrological processes responsible for carbon (CO2, CH4) exchanges with the atmosphere range from the molecular scale (pore-scale O2 consumption) to tens of kilometers (vegetation distribution, river networks). Additionally, many processes within LSMs are nonlinearly coupled (e.g., methane production and soil moisture dynamics), and therefore simple linear upscaling techniques can result in large prediction error. In this paper we applied a reduced-order modeling (ROM) technique known as "proper orthogonal decomposition mapping method" that reconstructs temporally resolved fine-resolution solutions based on coarse-resolution solutions. We developed four different methods and applied them to four study sites in a polygonal tundra landscape near Barrow, Alaska. Coupled surface–subsurface isothermal simulations were performed for summer months (June–September) at fine (0.25 m) and coarse (8 m) horizontal resolutions. We used simulation results from three summer seasons (1998–2000) to build ROMs of the 4-D soil moisture field for the study sites individually (single-site) and aggregated (multi-site). The results indicate that the ROM produced a significant computational speedup (> 103) with very small relative approximation error (< 0.1%) for 2 validation years not used in training the ROM. We also demonstrate that our approach: (1) efficiently corrects for coarse-resolution model bias and (2) can be used for polygonal tundra sites not included in the training data set with relatively good accuracy (< 1.7% relative error), thereby allowing for the possibility of applying these ROMs across a much larger landscape. By coupling the ROMs constructed at different scales together hierarchically, this method has the potential to efficiently increase the resolution of land models for coupled climate simulations to spatial scales consistent with mechanistic physical process representation.

scholarly journals Evaluation of TOPMODEL-Based Land Surface–Atmosphere Transfer Scheme (TOPLATS) through a Soil Moisture Simulation

2018 ◽  
Vol 22 (15) ◽  
pp. 1-19 ◽  
Author(s):  
Xiaolei Fu ◽  
Lifeng Luo ◽  
Ming Pan ◽  
Zhongbo Yu ◽  
Ying Tang ◽  
...  
Keyword(s):  
Soil Moisture ◽  
High Resolution ◽  
Land Surface ◽  
Spatial Scales ◽  
Absolute Difference ◽  
Coarse Scale ◽  
Transfer Scheme ◽  
Surface Atmosphere ◽  
Spatial Coverage

Abstract Better quantification of the spatiotemporal distribution of soil moisture across different spatial scales contributes significantly to the understanding of land surface processes on the Earth as an integrated system. While observational data for root-zone soil moisture (RZSM) often have sparse spatial coverage, model-simulated soil moisture may provide a useful alternative. TOPMODEL-Based Land Surface–Atmosphere Transfer Scheme (TOPLATS) has been widely studied and actively modified in recent years, while a detailed regional application with evaluation currently is still lacking. Thus, TOPLATS was used to generate high-resolution (30 arc s) RZSM based on coarse-scale (0.125°) forcing data over part of the Arkansas–Red River basin. First, the simulated RZSM was resampled to coarse scale to compare with the results of Mosaic, Noah, and VIC from NLDAS. Second, TOPLATS performance was assessed based on the spatial absolute difference among the models. The comparison shows that TOPLATS performance is similar to VIC, but different from Mosaic and Noah. Last, the simulated RZSM was compared with in situ observations of 16 stations in the study area. The results suggest that the simulated spatial distribution of RZSM is largely consistent with the distribution of topographic index (TI) in most instances, as topography was traditionally considered a major, but not the only, factor in horizontal redistribution of soil moisture. In addition, the finer-resolution RZSM can reflect the in situ soil moisture change at most local sites to a certain degree. The evaluation confirms that TOPLATS is a useful tool to estimate high-resolution soil moisture and has great potential to provide regional soil moisture estimates.

Sign in / Sign up

Export Citation Format

Share Document