LUMIO: a CubeSat to monitor the lunar farside

2021 ◽  
Author(s):  
Gianmario Merisio ◽  
Vittorio Franzese ◽  
Carmine Giordano ◽  
Mauro Massari ◽  
Pierluigi Di Lizia ◽  
...  

<p>Vast amounts of meteoroids and micrometeoroids continuously enter the Earth–Moon system and consequently become a potential threat. Lunar meteoroid impacts have caused a substantial change in the lunar surface and its properties. The Moon having no atmospheric blanket to protect itself, it is subjected to impacts from meteoroids ranging from a few kilograms to 10’s of grams each day. The high impact rate on the lunar surface has important implications for future human and robotic assets that will inhabit the Moon for significant periods of time. Therefore, a greater understanding of the meteoroid population in the cislunar environment is required for future exploration of the Moon.</p> <p>Moreover, refining current meteoroid models is of paramount importance for many applications. For instance, since meteoroids may travel dispersed along the orbit of their parent body, understanding meteoroids and associated phenomena can be valuable for the study of asteroids and comets themselves. Studying meteoroid impacts can help deepening the understanding of the spatial distribution of near-Earth objects in the Solar system. The study of dust particles can be also of interest because, together with the solar wind, they determine the space weather. Finally, it is critical to be able to predict impacts by relying on accurate impact flux models. That because the impact of small asteroids with Earth, even slightly larger than meteoroids, can cause severe damage.</p> <p>In this context, the Lunar Meteoroid Impacts Observer (LUMIO) is a CubeSat mission to observe, quantify, and characterise the meteoroid impacts by detecting their flashes on the lunar far-side. This complements the knowledge gathered by Earth-based observations of the lunar nearside, thus synthesising a global information on the lunar meteoroid environment. LUMIO envisages a 12U CubeSat form-factor placed in a halo orbit at Earth-Moon L2. The mission employs the LUMIO-Cam, an optical instrument capable of detecting light flashes in the visible spectrum. LUMIO is one of the two winner of ESA’s LUCE (Lunar CubeSat for Exploration) SysNova competition, and as such it is being considered by ESA for implementation in the near future. The Phase A study has been conducted in 2020 under ESA's General Support Technology Programme (GSTP) and successfully completed at the beginning of 2021, after an independent mission assessment performed by ESA’s CDF team.</p> <p>In this work, the latest results of the Phase A study of the LUMIO lunar CubeSat will be shown. An overview of the present-day LUMIO CubeSat A design will be given, with a focus on the latest developments. An overview on how LUMIO will impact the currently existing knowledge of meteoroid models will be given supported by high-fidelity simulated data.</p>

2013 ◽  
Vol 79 (4) ◽  
pp. 405-411 ◽  
Author(s):  
SERGEY I. POPEL ◽  
LEV M. ZELENYI

AbstractFrom the Apollo era of exploration, it was discovered that sunlight was scattered at the terminators giving rise to “horizon glow” and “streamers” above the lunar surface. Subsequent investigations have shown that the sunlight was most likely scattered by electrostatically charged dust grains originating from the surface. A renaissance is being observed currently in investigations of the Moon. The Luna-Glob and Luna-Resource missions (the latter jointly with India) are being prepared in Russia. Some of these missions will include investigations of lunar dust. Here we discuss the future experimental investigations of lunar dust within the missions of Luna-Glob and Luna-Resource. We consider the dusty plasma system over the lunar surface and determine the maximum height of dust rise. We describe mechanisms of formation of the dusty plasma system over the Moon and its main properties, determine distributions of electrons and dust over the lunar surface, and show a possibility of rising dust particles over the surface of the illuminated part of the Moon in the entire range of lunar latitudes. Finally, we discuss the effect of condensation of micrometeoriod substance during the expansion of the impact plume and show that this effect is important from the viewpoint of explanation of dust particle rise to high altitudes in addition to the dusty plasma effects.


Author(s):  
Alexander V. Zakharov

The surface of the Moon, as well as the surface of an airless body of the solar system, is subject to constant bombardment of micrometeorites, the effects of solar radiation, solar wind, and other space factors. As a result of the impact of high-speed micrometeorites for billions of years, the silicate base of the lunar surface is crushed, turning into particles with an approximately power-law-sized distribution. Given the explosive nature of the occurrence, these particles are characterized by an extremely irregular shape with pointed edges, either droplets close to spheres or conglomerates sintered at high temperatures. The plasma of the solar wind and the solar radiation, especially its ultraviolet part of the spectrum, when interacting with the upper layer of regolith causes a charge of the regolith upper layer and creates a near-surface double layer and an electric field. In this field, regolith particles of micron and submicron sizes can break away from the surface and levitate above the surface. Such dynamic processes lead to the transfer of dust particles over the surface of the Moon, as well as to the scattering of sunlight on these particles. Glows above the lunar surface of this nature were observed by television systems of American and Soviet landers in the early stages of lunar exploration. The American astronauts who landed on the lunar surface during the Apollo program experienced the aggressive properties of lunar dust. The results of the Apollo missions showed that dust particles are one of the main causes of danger to humans, spacecraft systems, and activities on the lunar surface. Based on the results of late 20th- and early 21st-century lunar research, as well as the proposed models, the article discusses the formation of the lunar regolith and the near-surface exosphere of the Moon under the influence of external factors in outer space. Relevant considerations include the causes and conditions of dust particle dynamics, the consequences of these processes as well as possible threats to humans, engineering systems during the implementation of planned research programs, and the exploration of the Moon. Also of relevance are models of the formation of a plasma-dust exosphere, the dynamics of dust particles in the near-surface region, and dust clouds at a distance of several tens of kilometers from the Moon’s surface, based on the available experimental data. The main unresolved problems associated with the dynamics of the dust component of lunar regolith are given, and methods for solving problematic issues are discussed. The Moon research programs of leading space agencies and their role in the study of Moon dust, its dynamics, human impact, and its activities in the implementation of promising programs for the study and exploration of the Moon are examined.


2021 ◽  
Vol 13 (6) ◽  
pp. 1087
Author(s):  
Yiren Chang ◽  
Zhiyong Xiao ◽  
Yang Liu ◽  
Jun Cui

Self-secondaries are a population of background secondaries, and they have been observed on top of impact melt and ballistically emplaced ejecta deposits on various planetary bodies. Self-secondaries are formed by impacts of sub-vertically launched ejecta, but the launch mechanism is not confirmed. The potential threat of self-secondaries to the theoretical and applicable reliability of crater chronology has been noted, but not constrained. Hitherto discovered self-secondaries were located around complex impact craters, but their potential existence around simple craters has not been discovered. Here we report the first discovery of self-secondaries around lunar cold spot craters, which are an extremely young population of simple craters formed within the past ~1 million years on the Moon. Self-secondaries are widespread on layers of cascading flow-like ejecta deposits around cold spot craters. The spatial density of self-secondaries dwarfs that of potential primary craters. The spatial distribution of self-secondaries is highly heterogeneous across the ejecta deposits. With respect to the impactor trajectory that formed cold spot craters, self-secondaries formed at the downrange of the ejecta deposits have the largest spatial density, while those at the uprange have the smallest density. This density pattern holds for all cold spot craters that were formed by non-vertical impacts, but self-secondaries do not exhibit other systematic density variations at different radial distances or at other azimuths with respect to the impactor trajectory. Among known mechanics of ejecting materials to the exterior of impact craters, impact spallation is the most likely scenario to account for the required large ejection velocities and angles to form self-secondaries. The production population of self-secondaries is estimated based on the highly diverse crater size-frequency distributions across the ejecta deposits of cold spot craters. For a better understanding of the impact history on the Moon, a systematic investigation for the effect of self-secondaries on lunar crater chronology is required.


1976 ◽  
Vol 31 ◽  
pp. 233-237 ◽  
Author(s):  
Otto E. Berg ◽  
Henry Wolf ◽  
John Rhee

In December, 1973, a Lunar Ejecta and Meteorites (LEAM) experiment was placed in the Taurus-Littrow area of the moon by the Apollo 17 Astronauts. Objectives of the experiment were centered around measurements of impact parameters of cosmic dust on the lunar surface. During preliminary attempts to analyze the data it became evident that the events registered by the sensors could not be attributed to cosmic dust but could only be identified with the lunar surface and the local sun angle. The nature of these data coupled with post-flight studies of instrument characteristics, have led to a conclusion that the LEAM experiment is responding primarily to a flux of highly charged, slowly moving lunar surface fines. Undoubtedly concealed in these data is the normal impact activity from cosmic dust and probably lunar ejecta, as well. This paper is based on the recognition that the bulk of events registered by the LEAM experiment are not signatures of hypervelocity cosmic dust particles, as expected, but are induced signatures of electrostatically charged and transported lunar fines.


2019 ◽  
Vol 11 (22) ◽  
pp. 2696
Author(s):  
Xiangzhao Zeng ◽  
Chuanrong Li

The Moon is a stable light source for the radiometric calibration of satellite sensors. It acts as a diffuse panel that reflects sunlight in all directions, however, the lunar surface is heterogeneous due to its topography and different mineral content and chemical composition at different locations, resulting in different optical properties. In order to perform radiometric calibration using the Moon, a lunar irradiance model using different observation geometry is required. Currently, two lunar irradiance models exist, namely, the Robotic Lunar Observatory (ROLO) and the Miller and Turner 2009 (MT2009). The ROLO lunar irradiance model is widely used as the radiometric standard for on-orbit sensors. The MT2009 lunar irradiance model is popular for remote sensing at night, however, the original version of the MT2009 lunar irradiance model takes less consideration of the heterogeneous lunar surface and lunar topography. Since the heterogeneity embedded in the lunar surface is the key to the improvement of the lunar irradiance model, this study analyzes the influence of the heterogeneous surface on the irradiance of moonlight based on model data at different scales. A heterogeneous correction factor is defined to describe the impact of the heterogeneous lunar surface on lunar irradiance. On the basis of the analysis, the following conclusions can be made. First, the influence of heterogeneity in the waning hemisphere is greater than that in waxing hemisphere under all 32 wavelengths of the ROLO filters. Second, the influence of heterogeneity embedded in the lunar surface exerts less impact on lunar irradiance at lower resolution. Third, the heterogeneous correction factor is scale independent. Finally, the lunar irradiance uncertainty introduced by topography is very small and decreases as the resolution of model data decreases due to the loss of topographic information.


Science ◽  
2019 ◽  
Vol 365 (6450) ◽  
pp. eaaw7471 ◽  
Author(s):  
Stefan Hergarten ◽  
Gerwin Wulf ◽  
Thomas Kenkmann

Mazrouei et al. (Reports, 18 January 2019, p. 253) found a nonuniform distribution of crater ages on Earth and the Moon, concluding that the impact flux increased about 290 million years ago. We show that the apparent increase on Earth can be explained by erosion, whereas that on the Moon may be an artifact of their calibration method.


Prima facie evidence for the meteoritic bombardment of the Moon is given by the known meteoritic environment of the Earth’s atmosphere. The impact by particles of different sizes and the likely damage to the lunar surface are discussed, reference being made to terrestrial craters and experiments with hypervelocity projectiles. An attempt is made to reconcile the formation and distribution of certain features with the results of meteoritic bombard­ment. In a number of instances the reconciliation is unsatisfactory and it is likely that the cause may be internal. It is pointed out that once a surface layer of dust has been formed, the effect of subsequent impacts by the smaller particles will only very slowly increase the depth.


Author(s):  
С.И. Копнин ◽  
С.И. Попель

This paper shows a possibility of the existence and propagation of dust acoustic solitons in plasmas of dusty exosphere of the Moon, which contains, in addition to electrons and ions of the solar wind and photoelectrons from the lunar surface, also charged dust particles, as well as photoelectrons emitted from the surfaces of these particles. Soliton solutions are found and the ranges of possible velocities and amplitudes of such solitons are determined depending on the height above the lunar surface for different subsolar angles.


2022 ◽  
Vol 579 ◽  
pp. 117362
Author(s):  
Anthony Lagain ◽  
Mikhail Kreslavsky ◽  
David Baratoux ◽  
Yebo Liu ◽  
Hadrien Devillepoix ◽  
...  
Keyword(s):  
The Moon ◽  

Author(s):  
И.Н. Бурдонский ◽  
А.Г. Леонов ◽  
В.Н. Юфа ◽  
А.П. Голубь ◽  
С.И. Попель ◽  
...  

The results of the first study on experimental modeling of the rise of dust particles by a shock wave above a target surface, performed on the Saturn installation, are presented. The interaction of laser radiation with a porous chondritic target, the surface of which contains fine particles of talc, is investigated. The results of experimental modeling can be used to describe the rise of dust particles from zones of nonlinear and linear elastic deformations of the regolith material, which characterize the impact of the meteoroid on the surface of the Moon.


Sign in / Sign up

Export Citation Format

Share Document