scholarly journals A 18-yr long (1993–2011) snow and meteorological dataset from a mid-altitude mountain site (Col de Porte, France, 1325 m alt.) for driving and evaluating snowpack models

2012 ◽  
Vol 5 (1) ◽  
pp. 29-45 ◽  
Author(s):  
S. Morin ◽  
Y. Lejeune ◽  
B. Lesaffre ◽  
J.-M. Panel ◽  
D. Poncet ◽  
...  
Keyword(s):  
Snow Depth ◽  
Snow Water Equivalent ◽  
Meteorological Data ◽  
Model Performance ◽  
Short Wave ◽  
Wave Radiation ◽  
Density Profiles ◽  
The Public ◽  
Snow Water

Abstract. A quality-controlled snow and meteorological dataset spanning the period 1 August 1993–31 July 2011 is presented, originating from the experimental station Col de Porte (1325 m altitude, Chartreuse range, France). Emphasis is placed on meteorological data relevant to the observation and modelling of the seasonal snowpack. In-situ driving data, at the hourly resolution, consist in measurements of air temperature, relative humidity, wind speed, incoming short-wave and long-wave radiation, precipitation rate partitioned between snow- and rainfall, with a focus on the snow-dominated season. Meteorological data for the three summer months (generally from 10 June to 20 September), when the continuity of the field record is not warranted, are taken from a local meteorological reanalysis (SAFRAN), in order to provide a continuous and consistent gap-free record. Evaluation data are provided at the daily (snow depth, snow water equivalent, runoff and albedo) and hourly (snow depth, albedo, runoff, surface temperature, soil temperature) time resolution. Internal snowpack information are provided from weekly manual snowpit observations (mostly consisting in penetration resistance, snow type, snow temperature and density profiles) and from a hourly record of temperature and height of vertically free "settling" disks. This dataset has been partially used in the past to assist in developing snowpack model and is presented here comprehensively for the purpose of multi-year model performance assessment. The data is placed on the PANGAEA repository (http://doi.pangaea.de/10.1594/PANGAEA.774249) as well as on the public ftp server ftp://ftp-cnrm.meteo.fr/pub-cencdp/.

scholarly journals An 18-yr long (1993–2011) snow and meteorological dataset from a mid-altitude mountain site (Col de Porte, France, 1325 m alt.) for driving and evaluating snowpack models

2012 ◽  
Vol 4 (1) ◽  
pp. 13-21 ◽  
Author(s):  
S. Morin ◽  
Y. Lejeune ◽  
B. Lesaffre ◽  
J.-M. Panel ◽  
D. Poncet ◽  
...  
Keyword(s):  
Snow Depth ◽  
Snow Water Equivalent ◽  
Meteorological Data ◽  
Model Performance ◽  
Short Wave ◽  
Wave Radiation ◽  
Density Profiles ◽  
The Public ◽  
Snow Water ◽  
Snowpack Properties

Abstract. A quality-controlled snow and meteorological dataset spanning the period 1 August 1993–31 July 2011 is presented, originating from the experimental station Col de Porte (1325 m altitude, Chartreuse range, France). Emphasis is placed on meteorological data relevant to the observation and modelling of the seasonal snowpack. In-situ driving data, at the hourly resolution, consist of measurements of air temperature, relative humidity, windspeed, incoming short-wave and long-wave radiation, precipitation rate partitioned between snow- and rainfall, with a focus on the snow-dominated season. Meteorological data for the three summer months (generally from 10 June to 20 September), when the continuity of the field record is not warranted, are taken from a local meteorological reanalysis (SAFRAN), in order to provide a continuous and consistent gap-free record. Data relevant to snowpack properties are provided at the daily (snow depth, snow water equivalent, runoff and albedo) and hourly (snow depth, albedo, runoff, surface temperature, soil temperature) time resolution. Internal snowpack information is provided from weekly manual snowpit observations (mostly consisting in penetration resistance, snow type, snow temperature and density profiles) and from a hourly record of temperature and height of vertically free ''settling'' disks. This dataset has been partially used in the past to assist in developing snowpack models and is presented here comprehensively for the purpose of multi-year model performance assessment. The data is placed on the PANGAEA repository (http://dx.doi.org/10.1594/PANGAEA.774249) as well as on the public ftp server ftp://ftp-cnrm.meteo.fr/pub-cencdp/.

scholarly journals Assimilation of snow cover and snow depth into a snow model to estimate snow water equivalent and snowmelt runoff in a Himalayan catchment

2017 ◽  
Vol 11 (4) ◽  
pp. 1647-1664 ◽  
Author(s):  
Emmy E. Stigter ◽  
Niko Wanders ◽  
Tuomo M. Saloranta ◽  
Joseph M. Shea ◽  
Marc F. P. Bierkens ◽  
...  
Keyword(s):  
Kalman Filter ◽  
Data Assimilation ◽  
Snow Cover ◽  
Climate Sensitivity ◽  
Snow Depth ◽  
Snow Water Equivalent ◽  
Snowmelt Runoff ◽  
Snow Water ◽  
Snow Model

Abstract. Snow is an important component of water storage in the Himalayas. Previous snowmelt studies in the Himalayas have predominantly relied on remotely sensed snow cover. However, snow cover data provide no direct information on the actual amount of water stored in a snowpack, i.e., the snow water equivalent (SWE). Therefore, in this study remotely sensed snow cover was combined with in situ observations and a modified version of the seNorge snow model to estimate (climate sensitivity of) SWE and snowmelt runoff in the Langtang catchment in Nepal. Snow cover data from Landsat 8 and the MOD10A2 snow cover product were validated with in situ snow cover observations provided by surface temperature and snow depth measurements resulting in classification accuracies of 85.7 and 83.1 % respectively. Optimal model parameter values were obtained through data assimilation of MOD10A2 snow maps and snow depth measurements using an ensemble Kalman filter (EnKF). Independent validations of simulated snow depth and snow cover with observations show improvement after data assimilation compared to simulations without data assimilation. The approach of modeling snow depth in a Kalman filter framework allows for data-constrained estimation of snow depth rather than snow cover alone, and this has great potential for future studies in complex terrain, especially in the Himalayas. Climate sensitivity tests with the optimized snow model revealed that snowmelt runoff increases in winter and the early melt season (December to May) and decreases during the late melt season (June to September) as a result of the earlier onset of snowmelt due to increasing temperature. At high elevation a decrease in SWE due to higher air temperature is (partly) compensated by an increase in precipitation, which emphasizes the need for accurate predictions on the changes in the spatial distribution of precipitation along with changes in temperature.

scholarly journals Validation of modeled snow properties in Afghanistan, Pakistan, and Tajikistan

2019 ◽  
Author(s):  
Edward H. Bair ◽  
Karl Rittger ◽  
Jawairia A. Ahmad ◽  
Doug Chabot
Keyword(s):  
Snow Depth ◽  
Snow Water Equivalent ◽  
Median Number ◽  
In Situ Measurements ◽  
Snow Properties ◽  
Wide Range ◽  
Spatial Estimates ◽  
Snow Water ◽  
Critical Layers

Abstract. Ice and snowmelt feed the Indus and Amu Darya rivers, yet there are limited in situ measurements of these resources. Previous work in the region has shown promise using snow water equivalent (SWE) reconstruction, which requires no in situ measurements, but validation has been a problem until recently when we were provided with daily manual snow depth measurements from Afghanistan, Tajikistan, and Pakistan by the Aga Khan Agency for Habitat (AKAH). For each station, accumulated precipitation and SWE were derived from snow depth using the SNOWPACK model. High-resolution (500 m) reconstructed SWE estimates from the ParBal model were then compared to the modeled SWE at the stations. The Alpine3D model was then used to create spatial estimates at 25 km to compare with estimates from other snow models. Additionally, the coupled SNOWPACK and Alpine3D system has the advantage of simulating snow profiles, which provide stability information. Following previous work, the median number of critical layers and percentage of facets across all of the pixels containing the AKAH stations was computed. For SWE at the point scale, the reconstructed estimates showed a bias of −42 mm (−19 %) at the peak. For the coarser spatial SWE estimates, the various models showed a wide range, with reconstruction being on the lower end. For stratigraphy, a heavily faceted snowpack is observed in both years, but 2018, a dry year, according to most of the models, showed more critical layers that persisted for a longer period.

Improved Northern Hemisphere Snow Water Equivalent product from passive microwave remote sensing and in situ data

2021 ◽  
Author(s):  
Colleen Mortimer ◽  
Lawrence Mudryk ◽  
Chris Derksen ◽  
Kari Luojus ◽  
Pinja Venalainen ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
Snow Depth ◽  
Snow Water Equivalent ◽  
Microwave Remote Sensing ◽  
Passive Microwave ◽  
Snow Density ◽  
Snow Season ◽  
Snow Water ◽  
Snow Mass

<p>The European Space Agency Snow CCI+ project provides global homogenized long time series of daily snow extent and snow water equivalent (SWE). The Snow CCI SWE product is built on the Finish Meteorological Institute's GlobSnow algorithm, which combines passive microwave data with in situ snow depth information to estimate SWE. The CCI SWE product improves upon previous versions of GlobSnow through targeted changes to the spatial resolution, ancillary data, and snow density parameterization.</p><p>Previous GlobSnow SWE products used a constant snow density of 0.24 kg m<sup>-3</sup> to convert snow depth to SWE. The CCI SWE product applies spatially and temporally varying density fields, derived by krigging in situ snow density information from historical snow transects to correct biases in estimated SWE. Grid spacing was improved from 25 km to 12.5 km by applying an enhanced spatial resolution microwave brightness temperature dataset. We assess step-wise how each of these targeted changes acts to improve or worsen the product by evaluating with snow transect measurements and comparing hemispheric snow mass and trend differences.</p><p>Together, when compared to GlobSnow v3, these changes improved RMSE by ~5 cm and correlation by ~0.1 against a suite of snow transect measurements from Canada, Finland, and Russia. Although the hemispheric snow mass anomalies of CCI SWE and GlobSnow v3 are similar, there are sizeable differences in the climatological SWE, most notably a one month delay in the timing of peak SWE and lower SWE during the accumulation season. These shifts were expected because the variable snow density is lower than the former fixed value of 0.24 kg m<sup>-3</sup> early in the snow season, but then increases over the course of the snow season. We also examine intermediate products to determine the relative improvements attributable solely to the increased spatial resolution versus changes due to the snow density parameterizations. Such systematic evaluations are critical to directing future product development.</p>

scholarly journals Climate sensitivity of snow water equivalent and snowmelt runoff in a Himalayan catchment

2016 ◽  
Author(s):  
Emmy E. Stigter ◽  
Niko Wanders ◽  
Tuomo M. Saloranta ◽  
Joseph M. Shea ◽  
Marc F.P. Bierkens ◽  
...  
Keyword(s):  
Kalman Filter ◽  
Snow Cover ◽  
Climate Sensitivity ◽  
Snow Depth ◽  
Snow Water Equivalent ◽  
Snowmelt Runoff ◽  
Snow Water ◽  
Snow Model ◽  
Increasing Temperature

Abstract. Snow is an important component of water storage in the Himalayas. Previous snowmelt studies in the Himalayas have predominantly relied on remotely sensed snow cover. However this provides no information on the actual amount of water stored in a snowpack i.e. the snow water equivalent (SWE). Therefore, in this study remotely sensed snow cover was combined with in situ meteorological observations and a modified version of the seNorge snow model to estimate climate sensitivity of SWE and snowmelt runoff in the Langtang catchment in Nepal. Landsat 8 and MOD10A2 snow cover maps were validated with in situ snow cover observations provided by surface temperature and snow depth measurements resulting in classification accuracies of 85.7 % and 83.1 % respectively. Optimal model parameter values were obtained through data assimilation of MOD10A2 snow maps and snow depth measurements using an Ensemble Kalman filter. The approach of modelling snow depth in a Kalman filter framework allows for data-constrained estimation of SWE rather than snow cover alone and this has great potential for future studies in the Himalayas. Climate sensitivity tests with the optimized snow model show a strong decrease in SWE in the valley with increasing temperature. However, at high elevation a decrease in SWE is (partly) compensated by an increase in precipitation, which emphasizes the need for accurate predictions on the changes in the spatial distribution of precipitation along with changes in temperature. Finally the climate sensitivity study revealed that snowmelt runoff increases in winter and early melt season (December to May) and decreases during the late melt season (June to September) as a result of the earlier onset of snowmelt due to increasing temperature.

scholarly journals Snow water equivalent modeling components in NewAge-JGrass

2014 ◽  
Vol 7 (3) ◽  
pp. 725-736 ◽  
Author(s):  
G. Formetta ◽  
S. K. Kampf ◽  
O. David ◽  
R. Rigon
Keyword(s):  
Goodness Of Fit ◽  
Hydrological Modeling ◽  
Snow Water Equivalent ◽  
Short Wave ◽  
Wave Radiation ◽  
Radiation Balance ◽  
Time Step ◽  
Vector Mode ◽  
Snow Water ◽  
Snow Model

Abstract. This paper presents a package of modified temperature-index-based snow water equivalent models as part of the hydrological modeling system NewAge-JGrass. Three temperature-based snow models are integrated into the NewAge-JGrass modeling system and use many of its components such as those for radiation balance (short wave radiation balance, SWRB), kriging (KRIGING), automatic calibration algorithms (particle swarm optimization) and tests of goodness of fit (NewAge-V), to build suitable modeling solutions (MS). Similarly to all the NewAge-JGrass components, the models can be executed both in raster and in vector mode. The simulation time step can be daily, hourly or sub-hourly, depending on user needs and availability of input data. The MS are applied on the Cache la Poudre River basin (CO, USA) using three test applications. First, daily snow water equivalent is simulated for three different measurement stations for two snow model formulations. Second, hourly snow water equivalent is simulated using all the three different snow model formulae. Finally, a raster mode application is performed to compute snow water equivalent maps for the whole Cache la Poudre Basin.

Ash on Snow a Tool – A Tool to Prevent Flooding?

2001 ◽  
Vol 32 (3) ◽  
pp. 195-214 ◽  
Author(s):  
Angela Lundberg ◽  
H Beyerl
Keyword(s):  
Snow Water Equivalent ◽  
Short Wave ◽  
Wood Ash ◽  
Wave Radiation ◽  
Short Wave Radiation ◽  
Index Method ◽  
Temperature Index ◽  
Index Model ◽  
Snow Water ◽  
Natural Snow

Years with late spring in combination with thick snow-pack constitute risk for flooding. To decrease that risk, the possibility of spreading albedo-lowering material (wood ash) on parts of a basin snow has been examined. By blackening the snow more solar radiation is absorbed and the snowmelt is enhanced. If sun-exposed parts of the basin are ash-treated (before normal runoff starts) the runoff will be distributed over a longer period of time and the risk of flooding will be reduced. Wood ash in different concentrations was spread on small snow plots and melt rates and albedo were measured. For snow covered with 0.03 kg ash m−2, the albedo was decreased from ≈ 0.60 for natural snow to ≈ 0.25, resulting in ≈ 90% more absorbed short-wave radiation. Melt on the ash treated surface, (daily average snow water equivalent), was 70% larger than melt on natural snow (12 and 7 mm d−1 respectively). A five times larger concentration (0.15 kg m−2) only increased the melt rate to 14 mm d−1. The temperature-index method was shown to be inadequate for modelling the melt rate for the ash treated snow. A radiation-index model, based on absorbed incoming short wave radiation, was shown to model the melt rate better than the temperature-index method.

scholarly journals Recent fluctuations of meteorological and snow conditions in Japanese mountains

2011 ◽  
Vol 52 (58) ◽  
pp. 209-215 ◽  
Author(s):  
Satoru Yamaguchi ◽  
Osamu Abe ◽  
Sento Nakai ◽  
Atsushi Sato
Keyword(s):  
Air Temperature ◽  
Snow Depth ◽  
Snow Water Equivalent ◽  
Earth Science ◽  
Meteorological Data ◽  
Winter Precipitation ◽  
Mountainous Areas ◽  
Snow Water ◽  
Notable Increase ◽  
Snow Conditions

AbstarctMeteorological data from mountainous areas of Japan have been collected by the National Research Institute for Earth Science and Disaster Prevention (NIED) for almost 20 years. The collected long-period data indicate that neither a notable increase in mean winter temperature nor a reduction in snow depth has occurred in these areas. The maximum snow depth, SDmax, and maximum snow water equivalent, SWEmax, show similar fluctuation trends, although with large year-to-year variations in value and a larger fluctuation range for SWEmax than for SDmax. This result suggests that monitoring of only SDmax in mountainous areas is not sufficient for understanding the quantitative fluctuation of water resources originating from snow. The SDmax fluctuation trends in mountainous areas sometimes differ from those in flatland areas because mountain SDmax depends more on winter precipitation than on mean winter air temperature, whereas the opposite is true for flatlands. In addition, the dependence ratio of SDmax on fluctuations in winter precipitation changes with altitude because the distributions of precipitation with air temperature change with altitude.

scholarly journals Estimation of Daily Spatial Snow Water Equivalent from Historical Snow Maps and Limited In-Situ Measurements

Hydrology ◽  
2020 ◽  
Vol 7 (3) ◽  
pp. 46
Author(s):  
Sami A. Malek ◽  
Roger C. Bales ◽  
Steven D. Glaser
Keyword(s):  
Snow Depth ◽  
Spatial Interpolation ◽  
Snow Water Equivalent ◽  
High Spatial Resolution ◽  
Optimal Interpolation ◽  
Novel Approach ◽  
Tuolumne River ◽  
Snow Water ◽  
Iot Devices

We present a scheme aimed at estimating daily spatial snow water equivalent (SWE) maps in real time and at high spatial resolution from scarce in-situ SWE measurements from Internet of Things (IoT) devices at actual sensor locations and historical SWE maps. The method consists of finding a background SWE field, followed by an update step using ensemble optimal interpolation to estimate the residuals. This novel approach allowed for areas with parsimonious sensors to have accurate estimates of spatial SWE without explicitly discovering and specifying the spatial-interpolation features. The scheme is evaluated across the Tuolumne River basin on a 50 m grid using an existing LiDAR-based product as the historical dataset. Results show a minimum RMSE of 30% at 50 m resolutions. Compared with the operational SNODAS product, reduction in error is up to 80% with historical LiDAR-measured snow depth as input data.

Sign in / Sign up

Export Citation Format

Share Document