scholarly journals Representing Low-Intensity Fire Sensible Heat Output in a Mesoscale Atmospheric Model with a Canopy Submodel: A Case Study with ARPS-CANOPY (version 5.2.12)

2021 ◽  
Author(s):  
Michael T. Kiefer ◽  
Warren E. Heilman ◽  
Shiyuan Zhong ◽  
Joseph J. Charney ◽  
Xindi Bian ◽  
...  
Keyword(s):  
Heat Flux ◽  
Heat Source ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Model Assessment ◽  
Sensible Heat ◽  
Model Sensitivity ◽  
Mesoscale Models ◽  
Low Intensity ◽  
Flux Profile

Abstract. Mesoscale models are a class of atmospheric numerical model designed to simulate atmospheric phenomena with horizontal scales of about 2–200 km, although they are also applied to microscale phenomena, with horizontal scales less than about 2 km. Mesoscale models are capable of simulating wildland fire impacts on atmospheric flows if combustion by-products (e.g., heat, smoke) are properly represented in the model. One of the primary challenges encountered in applying a mesoscale model to studies of fire-perturbed flows is the representation of the fire sensible heat source in the model. Two primary methods have been implemented previously: turbulent sensible heat flux, either in the form of an exponentially-decaying vertical heat flux profile or surface heat flux; and soil temperature perturbation. In this study, the ARPS-CANOPY model, a version of the Advanced Regional Prediction System (ARPS) model with a canopy submodel, is utilized to simulate the turbulent atmosphere during a low-intensity operational prescribed fire in the New Jersey Pine Barrens. The study takes place in two phases: model assessment and model sensitivity. In the model assessment phase, analysis is limited to a single control simulation in which the fire sensible heat source is represented as an exponentially-decaying vertical profile of turbulent sensible heat flux. In the model sensitivity phase, a series of simulations are conducted to explore the sensitivity of model-observation agreement to (i) the method used to represent the fire sensible heat source in the model and (ii) parameters controlling the magnitude and vertical distribution of the sensible heat source. In both phases, momentum and scalar fields are compared between the model simulations and data obtained from six flux towers located within and adjacent to the burn unit. The multi-dimensional model assessment confirms that the model reproduces the background and fire-perturbed atmosphere as depicted by the tower observations, although the model underestimates the turbulent kinetic energy at the top of the canopy at several towers. The model sensitivity tests reveal that the best agreement with observations occurs when the fire sensible heat source is represented as a turbulent sensible heat flux profile, with surface heat flux magnitude corresponding to the peak 1-min mean observed heat flux averaged across the flux towers, and an e-folding extinction depth corresponding to the average canopy height in the burn unit. The study findings provide useful guidance for improving the representation of the sensible heat released from low-intensity prescribed fires in mesoscale models.

Characteristics of Long-term Surface Heat Source and Its Climate Influence Factors in Central Tibetan Plateau

2021 ◽  
Author(s):  
Zeyong Hu ◽  
Xiaoqiang Yan
Keyword(s):  
Heat Flux ◽  
Heat Source ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Sensible Heat ◽  
Net Radiation ◽  
Maximum Value

<p>Based on multi-level AWS data during 2001 to 2015 and eddy covariance data during 2011 to 2014 at Nagqu Station of Plateau Climate and Environment, the turbulent fluxes were calculated by a surface energy balance combination (CM) and eddy covariance ( EC) method. A long-term heat fluxes and surface heat source were obtained with comparison and correction of EC and CM fluxes. The surface energy closure ratio is close to 1 in spring, summer and autumn. But it reaches to 1.34 in winter due to low net radiation observation value on snow surface. The sensible heat flux shows a ascend trend while latent heat flux shows a descend trend during 2002 to 2015. The surface heat source shows a descend trend. The analysis of the surface heat source indicates that it has a significant relationship with net radiation flux, surface temperature, soil moisture and wind speed. Particularly, the surface heat source has a significant response to net radiation flux throughout the year. There are obvious influences of surface temperature and soil moisture on the surface heat source in spring, autumn and winter. And the influence of wind speeds on surface heat source is strong only in spring. The annual variation of sensible heat flux and latent heat flux are obvious. Sensible heat flux reaches the maximum value of the year in April and the minimum value in July. however, latent heat flux shows the maximum value in July and the minimum value in January. </p>

The progress on the observation and modeling of surface heat fluxes and evapotranspiration over heterogeneous landscapes of the Third Pole region

2020 ◽  
Author(s):  
Yaoming Ma
Keyword(s):  
Heat Flux ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Surface Heat Fluxes ◽  
The Third ◽  
Land Surface Heat Fluxes

<p>The exchange of heat and water vapor between land surface and atmosphere over the Third Pole region (Tibetan Plateau and nearby surrounding region) plays an important role in Asian monsoon, westerlies and the northern hemisphere weather and climate systems. Supported by various agencies in the People’s Republic of China, a Third Pole Environment (TPE) observation and research Platform (TPEORP) is now implementing over the Third Pole region. The background of the establishment of the TPEORP, the establishing and monitoring plan of long-term scale (5-10 years) of it will be shown firstly. Then the preliminary observational analysis results, such as the characteristics of land surface energy fluxes partitioning and the turbulent characteristics will also been shown in this study. Then, the parameterization methodology based on satellite data and the atmospheric boundary layer (ABL) observations has been proposed and tested for deriving regional distribution of net radiation flux, soil heat flux, sensible heat flux and latent heat flux (evapotranspiration (ET)) and their variation trends over the heterogeneous landscape of the Tibetan Plateau (TP) area. To validate the proposed methodology, the ground measured net radiation flux, soil heat flux, sensible heat flux and latent heat flux of the TPEORP are compared to the derived values. The results showed that the derived land surface heat fluxes over the study areas are in good accordance with the land surface status. These parameters show a wide range due to the strong contrast of surface feature. And the estimated land surface heat fluxes are in good agreement with ground measurements, and all the absolute percent difference in less than 10% in the validation sites. The sensible heat flux has increased slightly and the latent heat flux has decreased from 2001 to 2016 over the TP. It is therefore conclude that the proposed methodology is successful for the retrieval of land surface heat fluxes and ET over heterogeneous landscape of the TP area. Further improvement of the methodology and its applying field over the whole Third Pole region and Pan-Third Pole region were also discussed.</p>

scholarly journals Estimation of Land Surface Heat Fluxes Based on Landsat 7 ETM+ Data and Field Measurements over the Northern Tibetan Plateau

2019 ◽  
Vol 11 (24) ◽  
pp. 2899
Author(s):  
Nan Ge ◽  
Lei Zhong ◽  
Yaoming Ma ◽  
Meilin Cheng ◽  
Xian Wang ◽  
...  
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Surface Heat Fluxes ◽  
Land Surface Heat Fluxes

Land surface heat fluxes consist of the net radiation flux, soil heat flux, sensible heat flux, and latent heat flux. The estimation of these fluxes is essential to the study of energy transfer in land–atmosphere systems. In this paper, Landsat 7 ETM+ SLC-on data were applied to estimate the land surface heat fluxes on the northern Tibetan Plateau using the SEBS (surface energy balance system) model, in combination with the calculation of field measurements at CAMP/Tibet (Coordinated Enhanced Observing Period (CEOP) Asia–Australia Monsoon Project on the Tibetan Plateau) automatic weather stations based on the combinatory method (CM) for comparison. The root mean square errors between the satellite estimations and the CM calculations for the net radiation flux, soil heat flux, sensible heat flux, and latent heat flux were 49.2 W/m2, 46.3 W/m2, 68.2 W/m2, and 54.9 W/m2, respectively. The results reveal that land surface heat fluxes all present significant seasonal variability. Apart from the sensible heat flux, the satellite-estimated net radiation flux, soil heat flux, and latent heat flux exhibited a trend of summer > spring > autumn > winter. In summer, spring, autumn, and winter, respectively, the median values of the net radiation flux (631.8 W/m2, 583.0 W/m2, 404.4 W/m2, 314.3 W/m2), soil heat flux (40.9 W/m2, 37.9 W/m2, 26.1 W/m2, 20.5 W/m2), sensible heat flux (252.7 W/m2, 219.5 W/m2, 221.4 W/m2, 204.8 W/m2), and latent heat flux (320.1 W/m2, 298.3 W/m2, 142.3 W/m2, 75.5 W/m2) exhibited distinct seasonal diversity. From November to April, the in situ sensible heat flux is higher than the latent heat flux; the opposite is true between June and September, leaving May and October as transitional months. For water bodies, alpine meadows and other main underlying surface types, sensible and latent heat flux generally present contrasting and complementary spatial distributions. Due to the 15–60 m resolution of the Landsat 7 ETM+ data, the distribution of land surface heat fluxes can be used as an indicator of complex underlying surface types over the northern Tibetan Plateau.

The observation and modeling of air-land interaction over heterogeneous landscapes of the Third Pole

2021 ◽  
Author(s):  
Yaoming Ma ◽  
Zeyong Hu ◽  
Binbin Wang ◽  
Lei Zhong ◽  
Weiqiang Ma ◽  
...  
Keyword(s):  
Heat Flux ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Surface Heat Fluxes ◽  
The Third ◽  
Land Surface Heat Fluxes

<p>The exchange of heat and water vapor between land surface and atmosphere over the Third Pole region (Tibetan Plateau and nearby surrounding region) plays an important role in Asian monsoon, westerlies and the northern hemisphere weather and climate systems. Supported by various agencies in the People’s Republic of China, a Third Pole Environment (TPE) observation and research Platform (TPEORP) is now implementing over the Third Pole region. The background of the establishment of the TPEORP, the establishing and monitoring plan of long-term scale (5-10 years) of it will be shown firstly. Then the preliminary observational analysis results, such as the characteristics of land surface energy fluxes partitioning and the turbulent characteristics will also been shown in this study. Then, the parameterization methodology based on satellite data and the atmospheric boundary layer (ABL) observations has been proposed and tested for deriving regional distribution of net radiation flux, soil heat flux, sensible heat flux and latent heat flux (evapotranspiration (ET)) and their variation trends over the heterogeneous landscape of the Tibetan Plateau (TP) area. To validate the proposed methodology, the ground measured net radiation flux, soil heat flux, sensible heat flux and latent heat flux of the TPEORP are compared to the derived values. The results showed that the derived land surface heat fluxes over the study areas are in good accordance with the land surface status. These parameters show a wide range due to the strong contrast of surface feature. And the estimated land surface heat fluxes are in good agreement with ground measurements, and all the absolute percent difference in less than 10% in the validation sites. The sensible heat flux has increased slightly and the latent heat flux has decreased from 2001 to 2018 over the TP. It is therefore conclude that the proposed methodology is successful for the retrieval of land surface heat fluxes and ET over heterogeneous landscape of the TP area. Further improvement of the methodology and its applying field over the whole Third Pole region and Pan-Third Pole region were also discussed.</p>

Estimation of Land Surface Heat Fluxes over the Tibetan Plateau Using GMS Data

2007 ◽  
Vol 46 (2) ◽  
pp. 183-195 ◽  
Author(s):  
Yuichiro Oku ◽  
Hirohiko Ishikawa ◽  
Zhongbo Su
Keyword(s):  
Heat Flux ◽  
Tibetan Plateau ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
The Tibetan Plateau ◽  
Sensible Heat ◽  
Surface Heat Fluxes ◽  
Diurnal Range

Abstract A Surface Energy Balance System (SEBS) originally developed for the NOAA Advanced Very High Resolution Radiometer was applied to Geostationary Meteorological Satellite (GMS)-5 Visible/Infrared Spin-Scan Radiometer data that were supplemented with other meteorological data. GMS-5, which is a geostationary satellite, recorded continuous hourly information. Surface temperatures obtained from the GMS-5 data were entered into SEBS to estimate the hourly regional distribution of the surface heat fluxes over the Tibetan Plateau. The estimated fluxes are verified by using corresponding field observations. The diurnal cycle of estimated fluxes agreed well with the field measurements. For example, the diurnal range of the estimated sensible heat flux decreases from June to August. This reflects the change of dry to wet surface characteristics resulting from frequent precipitation during the summer monsoon. Over the Tibetan Plateau, the diurnal range of the surface temperature is as large as the annual range, so that the resultant sensible heat flux has a large diurnal variation. Thus, the hourly estimation based on the GMS data may contribute to a better understanding of the land surface–atmosphere interaction in this critical area.

scholarly journals Study on Surface Heat Budget of Various Pavements for Urban Heat Island Mitigation

2012 ◽  
Vol 2012 ◽  
pp. 1-11 ◽  
Author(s):  
Hideki Takebayashi ◽  
Masakazu Moriyama
Keyword(s):  
Heat Flux ◽  
Urban Heat Island ◽  
Heat Budget ◽  
Sensible Heat Flux ◽  
Weather Conditions ◽  
Surface Heat ◽  
Heat Island ◽  
Sensible Heat ◽  
Urban Heat ◽  
Surface Heat Budget

The surface heat budgets of various pavement surfaces are studied with the aim of mitigating the urban heat island effect. In this study, the thermal characteristics of pavements are examined using data from observations. The net radiation, surface temperature, temperature under the surface, conduction heat flux, and core weight for each experimental surface are recorded, together with the weather conditions at the time of observation. The latent heat flux is estimated from the observed weight of the cores. The surface heat budget under the same weather conditions is examined, and the sensible heat flux from each target surface is calculated. The parameters that influence the surface heat budget, for example, solar reflectance (albedo), evaporative efficiency, heat conductivity, and heat capacity, are examined. On a typical summer day, the maximum reduction in the sensible heat flux from that on a normal asphalt surface is about 150 W/m2for an asphalt surface with water-retaining material and about 100 W/m2for a cement concrete surface with water-retaining material, depending on the albedo of each surface.

scholarly journals Response of the Energy Balance on the Margin of the Greenland Ice Sheet to Temperature Changes

1990 ◽  
Vol 36 (123) ◽  
pp. 217-221 ◽  
Author(s):  
Roger J. Braithwaite ◽  
Ole B. Olesen
Keyword(s):  
Heat Flux ◽  
Energy Balance ◽  
Air Temperature ◽  
Sensible Heat Flux ◽  
Ice Sheet ◽  
Temperature Response ◽  
Greenland Ice Sheet ◽  
Energy Balance Model ◽  
Balance Model ◽  
Sensible Heat

AbstractDaily ice ablation on two outlet glaciers from the Greenland ice sheet, Nordbogletscher (1979–83) and Qamanârssûp sermia (1980–86), is related to air temperature by a linear regression equation. Analysis of this ablation-temperature equation with the help of a simple energy-balance model shows that sensible-heat flux has the greatest temperature response and accounts for about one-half of the temperature response of ablation. Net radiation accounts for about one-quarter of the temperature response of ablation, and latent-heat flux and errors account for the remainder. The temperature response of sensible-heat flux at QQamanârssûp sermia is greater than at Nordbogletscher mainly due to higher average wind speeds. The association of high winds with high temperatures during Föhn events further increases sensible-heat flux. The energy-balance model shows that ablation from a snow surface is only about half that from an ice surface at the same air temperature.

Sign in / Sign up

Export Citation Format

Share Document