scholarly journals Developing an improved soil moisture dataset by blending passive and active microwave satellite-based retrievals

2011 ◽  
Vol 15 (2) ◽  
pp. 425-436 ◽  
Author(s):  
Y. Y. Liu ◽  
R. M. Parinussa ◽  
W. A. Dorigo ◽  
R. A. M. De Jeu ◽  
W. Wagner ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Land Surface Model ◽  
Cumulative Distribution ◽  
Degree Of Saturation ◽  
Combination Method ◽  
Surface Model ◽  
Volumetric Soil Water Content ◽  
Data Set ◽  
Spatial Coverage

Abstract. Combining information derived from satellite-based passive and active microwave sensors has the potential to offer improved estimates of surface soil moisture at global scale. We develop and evaluate a methodology that takes advantage of the retrieval characteristics of passive (AMSR-E) and active (ASCAT) microwave satellite estimates to produce an improved soil moisture product. First, volumetric soil water content (m3 m−3) from AMSR-E and degree of saturation (%) from ASCAT are rescaled against a reference land surface model data set using a cumulative distribution function matching approach. While this imposes any bias of the reference on the rescaled satellite products, it adjusts them to the same range and preserves the dynamics of original satellite-based products. Comparison with in situ measurements demonstrates that where the correlation coefficient between rescaled AMSR-E and ASCAT is greater than 0.65 ("transitional regions"), merging the different satellite products increases the number of observations while minimally changing the accuracy of soil moisture retrievals. These transitional regions also delineate the boundary between sparsely and moderately vegetated regions where rescaled AMSR-E and ASCAT, respectively, are used for the merged product. Therefore the merged product carries the advantages of better spatial coverage overall and increased number of observations, particularly for the transitional regions. The combination method developed has the potential to be applied to existing microwave satellites as well as to new missions. Accordingly, a long-term global soil moisture dataset can be developed and extended, enhancing basic understanding of the role of soil moisture in the water, energy and carbon cycles.

scholarly journals Developing an improved soil moisture dataset by blending passive and active microwave satellite-based retrievals

2010 ◽  
Vol 7 (5) ◽  
pp. 6699-6724 ◽  
Author(s):  
Y. Y. Liu ◽  
R. M. Parinussa ◽  
W. A. Dorigo ◽  
R. A. M. de Jeu ◽  
W. Wagner ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Land Surface Model ◽  
Cumulative Distribution ◽  
Surface Model ◽  
Carbon Cycles ◽  
In Situ Data ◽  
Spatial Coverage ◽  
Global Soil

Abstract. Combining information derived from satellite-based passive and active microwave sensors has the potential to offer improved retrievals of surface soil moisture variations at global scales. Here we propose a technique to take advantage of retrieval characteristics of passive (AMSR-E) and active (ASCAT) microwave satellite estimates over sparse-to-moderately vegetated areas to obtain an improved soil moisture product. To do this, absolute soil moisture values from AMSR-E and relative soil moisture derived from ASCAT are rescaled against a reference land surface model date set using a cumulative distribution function (CDF) matching approach. While this technique imposes the bias of the reference to the rescaled satellite products, it adjusts both satellite products to the same range and almost preserves the correlation between satellite products and in situ measurements. Comparisons with in situ data demonstrated that over the regions where the correlation coefficient between rescaled AMSR-E and ASCAT is above 0.65 (hereafter referred to as transitional regions), merging the different satellite products together increases the number of observations while minimally changing the accuracy of soil moisture retrievals. These transitional regions also delineate the boundary between sparsely and moderately vegetated regions where rescaled AMSR-E and ASCAT are respectively used in the merged product. Thus the merged product carries the advantages of better spatial coverage overall and increased number of observations particularly for the transitional regions. The combination approach developed in this study has the potential to be applied to existing microwave satellites as well as to new microwave missions. Accordingly, a long-term global soil moisture dataset can be developed and extended, enhancing basic understanding of the role of soil moisture in the water, energy and carbon cycles.

The detection of irrigation through remote sensing soil moisture and a land surface model: a case study in Spain

2020 ◽  
Author(s):  
Jacopo Dari ◽  
Pere Quintana-Seguí ◽  
María José Escorihuela ◽  
Luca Brocca ◽  
Renato Morbidelli ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Land Surface ◽  
Hydrological Cycle ◽  
Land Surface Model ◽  
Surface Model ◽  
Data Sets ◽  
Data Set ◽  
Agricultural Areas ◽  
Irrigation Practices

<p>Irrigation practices introduce imbalances in the natural hydrological cycle at different spatial scales and put pressure on water resources, especially under climate changing and population increasing scenarios. Despite the implications of irrigation on food production and on the rational management of the available freshwater, detailed information about the areas where irrigation actually occurs is still lacking. For this reason, the comprehensive knowledge of the dynamics of the hydrological cycle over agricultural areas is often tricky.</p><p>The first aim of this study is to evaluate the capability of five remote sensing soil moisture data sets to detect the irrigation signal over an intensely irrigated area located within the Ebro river basin, in the North of Spain, during the biennium 2016-2017. As a second objective, a methodology to map the irrigated areas through the K-means clustering algorithm is proposed. The remotely sensed soil moisture products used in this study are: SMOS (Soil Moisture and Ocean Salinity) at 1 km, SMAP (Soil Moisture Active Passive) at 1 km and 9 km, Sentinel-1 at 1 km and ASCAT (Advanced SCATterometer) at 12.5 km. The 1 km versions of SMOS and SMAP are DISPATCH (DISaggregation based on Physical And Theoretical scale CHange) downscaled versions of the corresponding coarser resolution products. An additional data set of soil moisture simulated by the SURFEX-ISBA (<em>Surface Externalisée - Interaction Sol Biosphère Atmosphère</em>) land surface model is used as a support for the performed analyses.</p><p>The capability of soil moisture products to detect irrigation has been investigated by exploiting indices representing the spatial and temporal dynamics of soil moisture. The L-band passive microwave downscaled products, especially SMAP at 1 km, result the best performing ones in detecting the irrigation signal over the pilot area; on the basis of these data sets, the K-means algorithm has been employed to classify three kinds of surfaces within the study area: the dryland, the forest or natural areas, and the actually irrigated areas. The resulting maps have been validated by exploiting maps of crops in Catalonia as ground truth data set. The percentage of irrigated areas well classified by the proposed method reaches the value of 78%; this result is obtained for the period May - September 2017. In addition, the method performs well in distinguishing the irrigated areas from rainfed agricultural areas, which are dry during summer, thus representing a useful tool to obtain explicit spatial information about where irrigation practices actually occur over agricultural areas equipped for this purpose.</p>

scholarly journals SMAP retrieval assimilation improves soil moisture estimation across irrigated areas in South Asia

2021 ◽  
Author(s):  
Jawairia A. Ahmad ◽  
Barton A. Forman ◽  
Sujay V. Kumar
Keyword(s):  
Soil Moisture ◽  
South Asia ◽  
Land Surface ◽  
Land Surface Model ◽  
Cumulative Distribution ◽  
Spatiotemporal Variability ◽  
Soil Conditions ◽  
Surface Model ◽  
Near Surface ◽  
Moisture Estimation

Abstract. A soil moisture retrieval assimilation framework is implemented across South Asia in an attempt to improve regional soil moisture estimation as well as to provide a consistent regional soil moisture dataset. This study aims to improve the spatiotemporal variability of soil moisture estimates by assimilating Soil Moisture Active Passive (SMAP) near surface soil moisture retrievals into a land surface model. The Noah-MP (v4.0.1) land surface model is run within the NASA Land Information System software framework to model regional land surface processes. NASA Modern-Era Retrospective Analysis for Research and Applications (MERRA2) and GPM Integrated Multi-satellitE Retrievals (IMERG) provide the meteorological boundary conditions to the land surface model. Assimilation is carried out using both cumulative distribution function (CDF) corrected (DA-CDF) and uncorrected SMAP retrievals (DA-NoCDF). CDF-matching is implemented to map the statistical moments of the SMAP soil moisture retrievals to the land surface model climatology. Comparison of assimilated and model-only soil moisture estimates with publicly available in-situ measurements highlight the relative improvement in soil moisture estimates by assimilating SMAP retrievals. Across the Tibetan Plateau, DA-NoCDF reduced the mean bias and RMSE by 8.4 % and 9.4 % even though assimilation only occurred during less than 10 % of the study period due to frozen soil conditions. The best goodness-of-fit statistics were achieved for the IMERG DA-NoCDF soil moisture experiment. SMAP retrieval assimilation corrected biases associated with unmodeled hydrologic phenomenon (e.g., anthropogenic influences due to irrigation). The highest influence of assimilation was observed across croplands. Improvements in soil moisture translated into improved spatiotemporal patterns of modeled evapotranspiration, yet limited influence of assimilation was observed on states included within the carbon cycle such as gross primary production. Improvement in fine-scale modeled estimates by assimilating coarse-scale retrievals highlights the potential of this approach for soil moisture estimation over data scarce regions.

scholarly journals Using Cosmic-Ray Neutron Probes in Validating Satellite Soil Moisture Products and Land Surface Models

Water ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1362 ◽  
Author(s):  
Mustafa Berk Duygu ◽  
Zuhal Akyürek
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Land Surface Model ◽  
Cosmic Ray ◽  
Surface Model ◽  
High Temporal Resolution ◽  
Land Surface Models ◽  
Statistical Measures ◽  
Surface Models ◽  
Global Land

Soil moisture content is one of the most important parameters of hydrological studies. Cosmic-ray neutron sensing is a promising proximal soil moisture sensing technique at intermediate scale and high temporal resolution. In this study, we validate satellite soil moisture products for the period of March 2015 and December 2018 by using several existing Cosmic Ray Neutron Probe (CRNP) stations of the COSMOS database and a CRNP station that was installed in the south part of Turkey in October 2016. Soil moisture values, which were inferred from the CRNP station in Turkey, are also validated using a time domain reflectometer (TDR) installed at the same location and soil water content values obtained from a land surface model (Noah LSM) at various depths (0.1 m, 0.3 m, 0.6 m and 1.0 m). The CRNP has a very good correlation with TDR where both measurements show consistent changes in soil moisture due to storm events. Satellite soil moisture products obtained from the Soil Moisture and Ocean Salinity (SMOS), the METOP-A/B Advanced Scatterometer (ASCAT), Soil Moisture Active Passive (SMAP), Advanced Microwave Scanning Radiometer 2 (AMSR2), Climate Change Initiative (CCI) and a global land surface model Global Land Data Assimilation System (GLDAS) are compared with the soil moisture values obtained from CRNP stations. Coefficient of determination ( r 2 ) and unbiased root mean square error (ubRMSE) are used as the statistical measures. Triple Collocation (TC) was also performed by considering soil moisture values obtained from different soil moisture products and the CRNPs. The validation results are mainly influenced by the location of the sensor and the soil moisture retrieval algorithm of satellite products. The SMAP surface product produces the highest correlations and lowest errors especially in semi-arid areas whereas the ASCAT product provides better results in vegetated areas. Both global and local land surface models’ outputs are highly compatible with the CRNP soil moisture values.

scholarly journals Assimilation of SMOS brightness temperatures or soil moisture retrievals into a land surface model

2016 ◽  
Vol 20 (12) ◽  
pp. 4895-4911 ◽  
Author(s):  
Gabriëlle J. M. De Lannoy ◽  
Rolf H. Reichle
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Surface Soil ◽  
Root Zone ◽  
Incidence Angle ◽  
Land Surface Model ◽  
Surface Model ◽  
Model Errors ◽  
Surface Soil Moisture ◽  
Brightness Temperatures

Abstract. Three different data products from the Soil Moisture Ocean Salinity (SMOS) mission are assimilated separately into the Goddard Earth Observing System Model, version 5 (GEOS-5) to improve estimates of surface and root-zone soil moisture. The first product consists of multi-angle, dual-polarization brightness temperature (Tb) observations at the bottom of the atmosphere extracted from Level 1 data. The second product is a derived SMOS Tb product that mimics the data at a 40° incidence angle from the Soil Moisture Active Passive (SMAP) mission. The third product is the operational SMOS Level 2 surface soil moisture (SM) retrieval product. The assimilation system uses a spatially distributed ensemble Kalman filter (EnKF) with seasonally varying climatological bias mitigation for Tb assimilation, whereas a time-invariant cumulative density function matching is used for SM retrieval assimilation. All assimilation experiments improve the soil moisture estimates compared to model-only simulations in terms of unbiased root-mean-square differences and anomaly correlations during the period from 1 July 2010 to 1 May 2015 and for 187 sites across the US. Especially in areas where the satellite data are most sensitive to surface soil moisture, large skill improvements (e.g., an increase in the anomaly correlation by 0.1) are found in the surface soil moisture. The domain-average surface and root-zone skill metrics are similar among the various assimilation experiments, but large differences in skill are found locally. The observation-minus-forecast residuals and analysis increments reveal large differences in how the observations add value in the Tb and SM retrieval assimilation systems. The distinct patterns of these diagnostics in the two systems reflect observation and model errors patterns that are not well captured in the assigned EnKF error parameters. Consequently, a localized optimization of the EnKF error parameters is needed to further improve Tb or SM retrieval assimilation.

scholarly journals Deriving surface soil moisture from reflected GNSS signal observations from a grassland site in southwestern France

2017 ◽  
Author(s):  
Sibo Zhang ◽  
Jean-Christophe Calvet ◽  
José Darrozes ◽  
Nicolas Roussel ◽  
Frédéric Frappart ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Land Surface Model ◽  
Ground Surface ◽  
Satellite System ◽  
Surface Model ◽  
Global Navigation Satellite ◽  
Grassland Site

Abstract. This work aims to assess the estimation of surface volumetric soil moisture (VSM) using the Global Navigation Satellite System Interferometric Reflectometry (GNSS-IR) technique. Year-round observations were acquired from a grassland site in southwestern France using an antenna consecutively placed at two contrasting heights above the ground surface (3.3 or 29.4 m). The VSM retrievals are compared with two independent reference datasets: in situ observations of soil moisture, and numerical simulations of soil moisture and vegetation biomass from the ISBA (Interactions between Soil, Biosphere and Atmosphere) land surface model. Scaled VSM estimates can be retrieved throughout the year removing vegetation effects by the separation of growth and senescence periods and by the filtering of the GNSS-IR observations that are most affected by vegetation. Antenna height has no significant impact on the quality of VSM estimates. Comparisons between the VSM GNSS-IR retrievals and the in situ VSM observations at a depth of 5 cm show a good agreement (R2 = 0.86 and RMSE = 0.04 m3 m−3). It is shown that the signal is sensitive to the grass litter water content and that this effect triggers differences between VSM retrievals and in situ VSM observations at depths of 1 cm and 5 cm, especially during light rainfall events.

scholarly journals SMOS Neural Network Soil Moisture Data Assimilation in a Land Surface Model and Atmospheric Impact

2019 ◽  
Author(s):  
Nemesio Rodriguez-Fernandez ◽  
Patricia de Rosnay ◽  
Clement Albergel ◽  
Philippe Richaume ◽  
Filipe Aires ◽  
...  
Keyword(s):  
Neural Network ◽  
Soil Moisture ◽  
Data Assimilation ◽  
Land Surface ◽  
Positive Impact ◽  
Land Surface Model ◽  
Surface Model ◽  
Northern Asia ◽  
The Impact

The assimilation of Soil Moisture and Ocean Salinity (SMOS) data into the ECMWF (European Centre for Medium Range Weather Forecasts) H-TESSEL (Hydrology revised - Tiled ECMWF Scheme for Surface Exchanges over Land) model is presented. SMOS soil moisture (SM) estimates have been produced specifically by training a neural network with SMOS brightness temperatures as input and H-TESSEL model SM simulations as reference. This can help the assimilation of SMOS information in several ways: (1) the neural network soil moisture (NNSM) data have a similar climatology to the model, (2) no global bias is present with respect to the model even if regional differences can exist. Experiments performing joint data assimilation (DA) of NNSM, 2 metre air temperature and relative humidity or NNSM-only DA are discussed. The resulting SM was evaluated against a large number of in situ measurements of SM obtaining similar results to those of the model with no assimilation, even if significant differences were found from site to site. In addition, atmospheric forecasts initialized with H-TESSEL runs (without DA) or with the analysed SM were compared to measure of the impact of the satellite information. Although, NNSM DA has an overall neutral impact in the forecast in the Tropics, a significant positive impact was found in other areas and periods, especially in regions with limited in situ information. The joint NNSM, T2m and RH2m DA improves the forecast for all the seasons in the Southern Hemisphere. The impact is mostly due to T2m and RH2m, but SMOS NN DA alone also improves the forecast in July- September. In the Northern Hemisphere, the joint NNSM, T2m and RH2m DA improves the forecast in April-September, while NNSM alone has a significant positive effect in July-September. Furthermore, forecasting skill maps show that SMOS NNSM improves the forecast in North America and in Northern Asia for up to 72 hours lead time.

Sign in / Sign up

Export Citation Format

Share Document