scholarly journals Geomorphometric analysis of cave ceiling channels mapped with 3-D terrestrial laser scanning

2016 ◽  
Vol 20 (5) ◽  
pp. 1827-1849 ◽  
Author(s):  
Michal Gallay ◽  
Zdenko Hochmuth ◽  
Ján Kaňuk ◽  
Jaroslav Hofierka
Keyword(s):  
Laser Scanning ◽  
Methodological Approach ◽  
Terrestrial Laser Scanning ◽  
Scalar Fields ◽  
Complex Environments ◽  
New Methods ◽  
Digital Elevation ◽  
Unique Manner ◽  
Elevation Model ◽  
Different Levels

Abstract. The change of hydrological conditions during the evolution of caves in carbonate rocks often results in a complex subterranean geomorphology, which comprises specific landforms such as ceiling channels, anastomosing half tubes, or speleothems organized vertically in different levels. Studying such complex environments traditionally requires tedious mapping; however, this is being replaced with terrestrial laser scanning technology. Laser scanning overcomes the problem of reaching high ceilings, providing new options to map underground landscapes with unprecedented level of detail and accuracy. The acquired point cloud can be handled conveniently with dedicated software, but applying traditional geomorphometry to analyse the cave surface is limited. This is because geomorphometry has been focused on parameterization and analysis of surficial terrain. The theoretical and methodological concept has been based on two-dimensional (2-D) scalar fields, which are sufficient for most cases of the surficial terrain. The terrain surface is modelled with a bivariate function of altitude (elevation) and represented by a raster digital elevation model. However, the cave is a 3-D entity; therefore, a different approach is required for geomorphometric analysis. In this paper, we demonstrate the benefits of high-resolution cave mapping and 3-D modelling to better understand the palaeohydrography of the Domica cave in Slovakia. This methodological approach adopted traditional geomorphometric methods in a unique manner and also new methods used in 3-D computer graphics, which can be applied to study other 3-D geomorphological forms.

scholarly journals Geomorphometric analysis of cave ceiling channels mapped with 3D terrestrial laser scanning

2016 ◽  
Author(s):  
Michal Gallay ◽  
Zdenko Hochmuth ◽  
Ján Kaňuk ◽  
Jaroslav Hofierka
Keyword(s):  
Laser Scanning ◽  
Methodological Approach ◽  
Three Dimensional ◽  
Terrestrial Laser Scanning ◽  
Scalar Fields ◽  
Complex Environments ◽  
Digital Elevation ◽  
Unique Manner ◽  
Elevation Model ◽  
Different Levels

Abstract. The change of hydrological conditions during the evolution of caves in carbonate rocks often results in a complex subterranean geomorphology which comprises specific landforms such as ceiling channels, anastomosing half tubes, or speleothems organised vertically in different levels. Studying such complex environments traditionally requires tedious mapping, however, this is being replaced with terrestrial laser scanning technology. Laser scanning overcomes the problem of reaching high ceilings providing new options to map underground landscapes with unprecedented level of detail and accuracy. The acquired point cloud can be handled conveniently with dedicated software, but applying traditional geomorphometry to analyse the cave surface is limited. This is because geomorphometry has been focused on parameterisation and analysis of surficial terrain. The theoretical and methodological concept has been based on two-dimensional scalar fields which is sufficient for most cases of the surficial terrain. The terrain surface is modelled with a bivariate function of altitude (elevation) and represented by a raster digital elevation model. However, the cave is a three-dimensional entity therefore a different approach is required for geomorphometric analysis. In this paper, we demonstrate the benefits of high resolution cave mapping and 3-D modelling to better understand the palaeohydrography of the Domica cave in Slovakia. This methodological approach adopted traditional geomorphometric methods in a unique manner and also new methods used in 3D computer graphics which can be applied to study other 3-D geomorphological forms

scholarly journals Terrestrial Laser Scanning for the Detection of Coarse Grain Size Movement in a Mountain Riverbed

Water ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 2199 ◽  
Author(s):  
Walicka ◽  
Jóźków ◽  
Kasprzak ◽  
Borkowski
Keyword(s):  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Horizontal Displacement ◽  
Mountain Stream ◽  
Limited Information ◽  
Fluvial Transport ◽  
Digital Elevation ◽  
Load Transport ◽  
Elevation Model

Fluvial transport is a natural process that shapes riverbeds and the surrounding terrain surface, particularly in mountainous areas. Since the traditional techniques used for fluvial transport investigation provide only limited information about the bed load transport, recently, laser scanning technology has been increasingly incorporated into research to investigate this issue in depth. In this study, a terrestrial laser scanning technique was used to investigate the transport of individual boulders. The measurements were carried out annually from 2011 to 2016 on the Łomniczka River, which is a medium-sized mountain stream. The main goal of this research was to detect and determine displacements of the biggest particles in the mountain riverbed. The methodology was divided into two steps. First, the change zones were detected using two strategies. The first strategy was based on differential digital elevation model (DEM) creation and the second involved the calculation of differences between point clouds instead of DEMs. The experiments show that the second strategy was more efficient. In the second step, the displacements of the boulders were determined based on the detected areas of change. Using the proposed methodology, displacements for individual stones in each year were determined. Most of the changes took place in 2012–2014, which correlates well with the hydrological observations. During the six-year period, movements of individual particles with diameters less than 0.8 m were observed. Maximal displacements in the observed period reached 3 m. Therefore, it is possible to determine both vertical and horizontal displacement in the riverbed using multitemporal TLS.

scholarly journals Fusion of high resolution remote sensing images and terrestrial laser scanning for improved biomass estimation of maize

2014 ◽  
Vol XL-7 ◽  
pp. 101-108 ◽  
Author(s):  
C. Hütt ◽  
H. Schiedung ◽  
N. Tilly ◽  
G. Bareth
Keyword(s):  
High Resolution ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Satellite System ◽  
Biomass Estimation ◽  
Digital Elevation ◽  
Elevation Model ◽  
In The Beginning

In this study, images from the satellite system WorldView-2 in combination with terrestrial laser scanning (TLS) over a maize field in Germany are investigated. Simultaneously to the measurements a biomass field campaigns was carried out. From the point clouds of the terrestrial laser scanning campaigns crop surface models (CSM) from each scanning date were calculate to model plant growth over time. These results were resampled to match the spatial resolution of the WorldView-2 images, which had to orthorectified using a high resolution digital elevation model and atmosphere corrected using the ATCOR Software package. A high direct correlation of the NDVI calculated from the WorldView-2 sensor and the dry biomass was found in the beginning of June. At the same date, the heights from laser scanning can also explain a certain amount of the biomass variation (<i>r</i><sup>2</sup> = 0.6). By combining the NDVI from WorldView-2 and the height from the laser scanner with a linear model, the R2 reaches higher values of 0.86. To further understand the relationship between CSM derived crop heights and reflection indices, a comparison on a pixel basis was performed. Interestingly, the correlation of the NDVI and the crop height is rather low at the beginning of June (<i>r</i><sup>2</sup> = 0,4, <i>n</i> = 1857) and increases significantly (<i>R</i><sup>2</sup> = 0,79, <i>N</i> = 1857) at a later stage.

Computing Method for Estimating Strain and Stress of Steel Beams Using Terrestrial Laser Scanning and FEM

2007 ◽  
Vol 347 ◽  
pp. 517-522 ◽  
Author(s):  
D.S. Kang ◽  
H.M. Lee ◽  
Hyo Seon Park ◽  
I. Lee
Keyword(s):  
Laser Scanning ◽  
Three Dimensional ◽  
Terrestrial Laser Scanning ◽  
Experimental Tests ◽  
Laser Pulses ◽  
Point Of View ◽  
Steel Beams ◽  
Quality Of Data ◽  
Digital Elevation ◽  
Elevation Model

Terrestrial laser scanning (TLS) is the technique able to acquire the dense three-dimensional (3D) coordinates effectively over entire surfaces of the objects using laser pulses. Recently, TLS is often used in various fields such as civil engineering or archeology for object modeling, volume survey of tunnel, geographic information system (GIS), and the purpose to conserve the detailed shapes of cultural heritages. However, though its applications are extended continually, an application for system identification and structural health monitoring is a beginning stage. To improve the quality of data for the model based on TLS coordinate information, the digital elevation model (DEM) constructing method is applied. In a practical point of view, since there is no need to place a strain or stress sensor to a structure to be monitored, this model could has many advantages such as no in situ instrumentation of sensors, no difficulties to reach structures or structural members, independence of natural light source and no wiring cost. For the verification of this model, experimental tests are performed with a continuous steel beam subjected to point loads.

scholarly journals ANALYSIS OF INFLUENCE OF TERRAIN RELIEF ROUGHNESS ON DEM ACCURACY GENERATED FROM LIDAR IN THE CZECH REPUBLIC TERRITORY

2016 ◽  
Vol XLI-B4 ◽  
pp. 25-30 ◽  
Author(s):  
M. Hubacek ◽  
V. Kovarik ◽  
V. Kratochvil
Keyword(s):  
Czech Republic ◽  
Laser Scanning ◽  
Vegetation Coverage ◽  
The Czech Republic ◽  
Digital Elevation ◽  
Lower Accuracy ◽  
Check Points ◽  
Elevation Data ◽  
Dem Accuracy ◽  
Elevation Model

Digital elevation models are today a common part of geographic information systems and derived applications. The way of their creation is varied. It depends on the extent of area, required accuracy, delivery time, financial resources and technologies available. The first model covering the whole territory of the Czech Republic was created already in the early 1980's. Currently, the 5th DEM generation is being finished. Data collection for this model was realized using the airborne laser scanning which allowed creating the DEM of a new generation having the precision up to a decimetre. Model of such a precision expands the possibilities of employing the DEM and it also offers new opportunities for the use of elevation data especially in a domain of modelling the phenomena dependent on highly accurate data. The examples are precise modelling of hydrological phenomena, studying micro-relief objects, modelling the vehicle movement, detecting and describing historical changes of a landscape, designing constructions etc. <br><br> Due to a nature of the technology used for collecting data and generating DEM, it is assumed that the resulting model achieves lower accuracy in areas covered by vegetation and in built-up areas. Therefore the verification of model accuracy was carried out in five selected areas in Moravia. The network of check points was established using a total station in each area. To determine the reference heights of check points, the known geodetic points whose heights were defined using levelling were used. Up to several thousands of points were surveyed in each area. Individual points were selected according to a different configuration of relief, different surface types, and different vegetation coverage. The sets of deviations were obtained by comparing the DEM 5G heights with reference heights which was followed by verification of tested elevation model. Results of the analysis showed that the model reaches generally higher precision than the declared one in majority of areas. This applies in particular to areas covered by vegetation. By contrast, the larger deviations occurred in relation to the slope of the terrain, in particular in the micro-relief objects. The results are presented in this article.

scholarly journals Towards Tree Green Crown Volume: A Methodological Approach Using Terrestrial Laser Scanning

2020 ◽  
Vol 12 (11) ◽  
pp. 1841 ◽  
Author(s):  
Zihui Zhu ◽  
Christoph Kleinn ◽  
Nils Nölke
Keyword(s):  
Laser Scanning ◽  
Methodological Approach ◽  
Terrestrial Laser Scanning ◽  
Urban Trees ◽  
Volume Index ◽  
Convex Hulls ◽  
Tree Crown ◽  
Crown Volume ◽  
Matter Production

Crown volume is a tree attribute relevant in a number of contexts, including photosynthesis and matter production, storm resistance, shadowing of lower layers, habitat for various taxa. While commonly the total crown volume is being determined, for example by wrapping a convex hull around the crown, we present here a methodological approach towards assessing the tree green crown volume (TGCVol), the crown volume with a high density of foliage, which we derive by terrestrial laser scanning in a case study of solitary urban trees. Using the RGB information, we removed the hits on stem and branches within the tree crown and used the remaining leaf hits to determine TGCVol from k-means clustering and convex hulls for the resulting green 3D clusters. We derived a tree green crown volume index (TGCVI) relating the green crown volume to the total crown volume. This TGCVI is a measure of how much a crown is “filled with green” and scale-dependent (a function of specifications of the k-means clustering). Our study is a step towards a standardized assessment of tree green crown volume. We do also address a number of remaining methodological challenges.

scholarly journals Estimation of forest parameters using airborne laser scanning data

2015 ◽  
Vol 5 (2) ◽  
pp. 549-576
Author(s):  
J. Cohen
Keyword(s):  
Laser Scanning ◽  
Tree Height ◽  
National Forest Inventory ◽  
Airborne Laser Scanning ◽  
Forest Mapping ◽  
Airborne Laser ◽  
Forest Region ◽  
Digital Elevation ◽  
Industry Applications ◽  
Elevation Model

Abstract. Methods for the estimation of forest characteristics by airborne laser scanning (ALS) data have been introduced by several authors. Tree height (TH) and canopy closure (CC) describing the forest properties can be used in forest, construction and industry applications, as well as research and decision making. The National Land Survey has been collecting ALS data from Finland since 2008 to generate a nationwide high resolution digital elevation model. Although this data has been collected in leaf-off conditions, it still has the potential to be utilized in forest mapping. A method where this data is used for the estimation of CC and TH in the boreal forest region is presented in this paper. Evaluation was conducted in eight test areas across Finland by comparing the results with corresponding Multi-Source National Forest Inventory (MS-NFI) datasets. The ALS based CC and TH maps were generally in a good agreement with the MS-NFI data. As expected, deciduous forests caused some underestimation in CC and TH, but the effect was not major in any of the test areas. The processing chain has been fully automated enabling fast generation of forest maps for different areas.

Sign in / Sign up

Export Citation Format

Share Document