scholarly journals RECORDING AND MODELLING OF MONUMENTS' INTERIOR SPACE USING RANGE AND OPTICAL SENSORS

2016 ◽  
Vol XLI-B5 ◽  
pp. 939-944
Author(s):  
Charalampos Georgiadis ◽  
Petros Patias ◽  
Vasilios Tsioukas
Keyword(s):  
Optical Sensors ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Point Clouds ◽  
Research Field ◽  
Interior Space ◽  
Range Camera ◽  
Highly Active ◽  
Fixed Base ◽  
Active Research

Three dimensional modelling of artefacts and building interiors is a highly active research field in our days. Several techniques are being utilized to perform such a task, spanning from traditional surveying techniques and photogrammetry to structured light scanners, laser scanners and so on. New technological advancements in both hardware and software create new recording techniques, tools and approaches. In this paper we present a new recording and modelling approach based on the SwissRanger SR4000 range camera coupled with a Canon 400D dSLR camera. The hardware component of our approach consists of a fixed base, which encloses the range and SLR cameras. The two sensors are fully calibrated and registered to each other thus we were able to produce colorized point clouds acquired from the range camera. In this paper we present the initial design and calibration of the system along with experimental data regarding the accuracy of the proposed approach. We are also providing results regarding the modelling of interior spaces and artefacts accompanied with accuracy tests from other modelling approaches based on photogrammetry and laser scanning.

scholarly journals RECORDING AND MODELLING OF MONUMENTS' INTERIOR SPACE USING RANGE AND OPTICAL SENSORS

2016 ◽  
Vol XLI-B5 ◽  
pp. 939-944 ◽  
Author(s):  
Charalampos Georgiadis ◽  
Petros Patias ◽  
Vasilios Tsioukas
Keyword(s):  
Optical Sensors ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Point Clouds ◽  
Research Field ◽  
Interior Space ◽  
Range Camera ◽  
Highly Active ◽  
Fixed Base ◽  
Active Research

Three dimensional modelling of artefacts and building interiors is a highly active research field in our days. Several techniques are being utilized to perform such a task, spanning from traditional surveying techniques and photogrammetry to structured light scanners, laser scanners and so on. New technological advancements in both hardware and software create new recording techniques, tools and approaches. In this paper we present a new recording and modelling approach based on the SwissRanger SR4000 range camera coupled with a Canon 400D dSLR camera. The hardware component of our approach consists of a fixed base, which encloses the range and SLR cameras. The two sensors are fully calibrated and registered to each other thus we were able to produce colorized point clouds acquired from the range camera. In this paper we present the initial design and calibration of the system along with experimental data regarding the accuracy of the proposed approach. We are also providing results regarding the modelling of interior spaces and artefacts accompanied with accuracy tests from other modelling approaches based on photogrammetry and laser scanning.

scholarly journals The Implications of M3C2 Projection Diameter on 3D Semi-Automated Rockfall Extraction from Sequential Terrestrial Laser Scanning Point Clouds

2020 ◽  
Vol 12 (11) ◽  
pp. 1885 ◽  
Author(s):  
Paul-Mark DiFrancesco ◽  
David Bonneau ◽  
D. Jean Hutchinson
Keyword(s):  
Laser Scanning ◽  
Rock Slope ◽  
Spatial Information ◽  
Three Dimensional ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Multiscale Model ◽  
Computation Method ◽  
Highly Active ◽  
Optimal Projection

Rockfall inventories are essential to quantify a rockfall activity and characterize the hazard. Terrestrial laser scanning and advancements in processing algorithms have resulted in three-dimensional (3D) semi-automatic extraction of rockfall events, permitting detailed observations of evolving rock masses. Currently, multiscale model-to-model cloud comparison (M3C2) is the most widely used distance computation method used in the geosciences to evaluate 3D changing features, considering the time-sequential spatial information contained in point clouds. M3C2 operates by computing distances using points that are captured within a projected search cylinder, which is locally oriented. In this work, we evaluated the effect of M3C2 projection diameter on the extraction of 3D rockfalls and the resulting implications on rockfall volume and shape. Six rockfall inventories were developed for a highly active rock slope, each utilizing a different projection diameter which ranged from two to ten times the point spacing. The results indicate that the greatest amount of change is extracted using an M3C2 projection diameter equal to, or slightly larger than, the point spacing, depending on the variation in point spacing. When the M3C2 projection diameter becomes larger than the changing area on the rock slope, the change cannot be identified and extracted. Inventory summaries and illustrations depict the influence of spatial averaging on the semi-automated rockfall extraction, and suggestions are made for selecting the optimal projection diameter. Recommendations are made to improve the methods used to semi-automatically extract rockfall from sequential point clouds.

scholarly journals Comparison of Depth Camera and Terrestrial Laser Scanner in Monitoring Structural Deflections

Sensors ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 201
Author(s):  
Michael Bekele Maru ◽  
Donghwan Lee ◽  
Kassahun Demissie Tola ◽  
Seunghee Park
Keyword(s):  
Optical Sensors ◽  
Point Cloud ◽  
Three Dimensional ◽  
Laser Scanner ◽  
Point Clouds ◽  
Depth Camera ◽  
Terrestrial Laser Scanner ◽  
Cloud Data ◽  
3D Point Clouds ◽  
3D Information

Modeling a structure in the virtual world using three-dimensional (3D) information enhances our understanding, while also aiding in the visualization, of how a structure reacts to any disturbance. Generally, 3D point clouds are used for determining structural behavioral changes. Light detection and ranging (LiDAR) is one of the crucial ways by which a 3D point cloud dataset can be generated. Additionally, 3D cameras are commonly used to develop a point cloud containing many points on the external surface of an object around it. The main objective of this study was to compare the performance of optical sensors, namely a depth camera (DC) and terrestrial laser scanner (TLS) in estimating structural deflection. We also utilized bilateral filtering techniques, which are commonly used in image processing, on the point cloud data for enhancing their accuracy and increasing the application prospects of these sensors in structure health monitoring. The results from these sensors were validated by comparing them with the outputs from a linear variable differential transformer sensor, which was mounted on the beam during an indoor experiment. The results showed that the datasets obtained from both the sensors were acceptable for nominal deflections of 3 mm and above because the error range was less than ±10%. However, the result obtained from the TLS were better than those obtained from the DC.

scholarly journals USING MOBILE LASER SCANNING DATA FOR FEATURES EXTRACTION OF HIGH ACCURACY DRIVING MAPS

2016 ◽  
Vol XLI-B3 ◽  
pp. 433-439 ◽  
Author(s):  
Bisheng Yang ◽  
Yuan Liu ◽  
Fuxun Liang ◽  
Zhen Dong
Keyword(s):  
Laser Scanning ◽  
Human Error ◽  
Traffic Accidents ◽  
Three Dimensional ◽  
Point Clouds ◽  
High Accuracy ◽  
3D Point Clouds ◽  
Assistant Systems ◽  
Novel Method ◽  
High Flexibility

High Accuracy Driving Maps (HADMs) are the core component of Intelligent Drive Assistant Systems (IDAS), which can effectively reduce the traffic accidents due to human error and provide more comfortable driving experiences. Vehicle-based mobile laser scanning (MLS) systems provide an efficient solution to rapidly capture three-dimensional (3D) point clouds of road environments with high flexibility and precision. This paper proposes a novel method to extract road features (e.g., road surfaces, road boundaries, road markings, buildings, guardrails, street lamps, traffic signs, roadside-trees, power lines, vehicles and so on) for HADMs in highway environment. Quantitative evaluations show that the proposed algorithm attains an average precision and recall in terms of 90.6% and 91.2% in extracting road features. Results demonstrate the efficiencies and feasibilities of the proposed method for extraction of road features for HADMs.

scholarly journals VISUALIZATION OF THE CONSTRUCTION OF ANCIENT ROMAN BUILDINGS IN OSTIA USING POINT CLOUD DATA

2017 ◽  
Vol XLII-2/W3 ◽  
pp. 345-352
Author(s):  
Y. Hori ◽  
T. Ogawa
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Feature Matching ◽  
Three Dimensional ◽  
Point Clouds ◽  
Final Report ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Coverage Accuracy ◽  
New Research

The implementation of laser scanning in the field of archaeology provides us with an entirely new dimension in research and surveying. It allows us to digitally recreate individual objects, or entire cities, using millions of three-dimensional points grouped together in what is referred to as "point clouds". In addition, the visualization of the point cloud data, which can be used in the final report by archaeologists and architects, should usually be produced as a JPG or TIFF file. Not only the visualization of point cloud data, but also re-examination of older data and new survey of the construction of Roman building applying remote-sensing technology for precise and detailed measurements afford new information that may lead to revising drawings of ancient buildings which had been adduced as evidence without any consideration of a degree of accuracy, and finally can provide new research of ancient buildings. We used laser scanners at fields because of its speed, comprehensive coverage, accuracy and flexibility of data manipulation. Therefore, we “skipped” many of post-processing and focused on the images created from the meta-data simply aligned using a tool which extended automatic feature-matching algorithm and a popular renderer that can provide graphic results.

scholarly journals Weighing trees with lasers: advances, challenges and opportunities

2018 ◽  
Vol 8 (2) ◽  
pp. 20170048 ◽  
Author(s):  
M. I. Disney ◽  
M. Boni Vicari ◽  
A. Burt ◽  
K. Calders ◽  
S. L. Lewis ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Large Scale ◽  
Three Dimensional ◽  
Point Clouds ◽  
3D Models ◽  
Tree Form ◽  
Form And Function ◽  
Challenges And Opportunities ◽  
And Function ◽  
Non Destructive

Terrestrial laser scanning (TLS) is providing exciting new ways to quantify tree and forest structure, particularly above-ground biomass (AGB). We show how TLS can address some of the key uncertainties and limitations of current approaches to estimating AGB based on empirical allometric scaling equations (ASEs) that underpin all large-scale estimates of AGB. TLS provides extremely detailed non-destructive measurements of tree form independent of tree size and shape. We show examples of three-dimensional (3D) TLS measurements from various tropical and temperate forests and describe how the resulting TLS point clouds can be used to produce quantitative 3D models of branch and trunk size, shape and distribution. These models can drastically improve estimates of AGB, provide new, improved large-scale ASEs, and deliver insights into a range of fundamental tree properties related to structure. Large quantities of detailed measurements of individual 3D tree structure also have the potential to open new and exciting avenues of research in areas where difficulties of measurement have until now prevented statistical approaches to detecting and understanding underlying patterns of scaling, form and function. We discuss these opportunities and some of the challenges that remain to be overcome to enable wider adoption of TLS methods.

A new drone laser scanning benchmark dataset for characterization of single-tree and forest biophysical properties

2021 ◽  
Author(s):  
Puliti Stefano ◽  
Grant D. Pears ◽  
Michael S. Watt ◽  
Edward Mitchard ◽  
Iain McNicol ◽  
...  
Keyword(s):  
Boreal Forests ◽  
Laser Scanning ◽  
Method Development ◽  
Three Dimensional ◽  
Point Clouds ◽  
Benchmark Dataset ◽  
Validation Dataset ◽  
Tree Structures ◽  
Single Tree ◽  
Individual Trees

<p>Survey-grade drone laser scanners suitable for unmanned aerial vehicles (UAV-LS) allow the efficient collection of finely detailed three-dimensional information of tree structures. This data type allows forests to be resolved into discrete individual trees and has shown promising results in providing accurate in-situ observations of key forestry variables. New and improved approaches for analyzing UAV-LS point clouds have to be developed to transform the vast amounts of data from UAV-LS into actionable insights and decision support. Many different studies have explored various methods for automating single tree detection, segmentation, parsing into different tree components, and measurement of biophysical variables (e.g., diameter at breast height). Despite the considerable efforts dedicated to developing automated ways to process UAV-LS data into useful data, current methods tend to be tailored to small datasets, and it remains challenging to evaluate the performance of different algorithms based on a consistent validation dataset. To fill this knowledge gap and to further advance our ability to measure forests from UAV-LS data, we present a new benchmarking dataset. This data is composed of manually labelled UAV-LS data acquired a number of continents and biomes which span tropical to boreal forests. The UAV-LS data was collected exclusively used survey-grade sensors such as the Riegl VUX and mini-VUX series which are characterized by a point density in the range 1 – 10 k points m<sup>2</sup>. Currently, such data represent the state-of-the-art in aerial laser scanning data. The benchmark data consists of a library of single-tree point clouds, aggregated to sample plots, with each point classified as either stem, branch, or leaves. With the objective of releasing such a benchmark dataset as a public asset, in the future, researchers will be able to leverage such pre-existing labelled trees for developing new methods to measure forests from UAV-LS data. The availability of benchmarking datasets represents an important driver for enabling the development of robust and accurate methods. Such a benchmarking dataset will also be important for a consistent comparison of existing or future algorithms which will guide future method development.</p>

Mining Hidden Association Rules from Real-Life Data

2010 ◽  
pp. 168-184
Author(s):  
Marco-Antonio Balderas Cepeda
Keyword(s):  
Association Rules ◽  
Real Life ◽  
Research Field ◽  
Good Reliability ◽  
Highly Active ◽  
Network Intrusion ◽  
Real Life Data ◽  
Alternative Approach ◽  
Rule Sets ◽  
Active Research

Association rule mining has been a highly active research field over the past decade. Extraction of frequency-related patterns has been applied to several domains. However, the way association rules are defined has limited people’s ability to obtain all the patterns of interest. In this chapter, the authors present an alternative approach that allows us to obtain new kinds of association rules that represent deviations from common behaviors. These new rules are called anomalous rules. To obtain such rules requires that we extract all the most frequent patterns together with certain extension patterns that may occur very infrequently. An approach that relies on anomalous rules has possible application in the areas of counterterrorism, fraud detection, pharmaceutical data analysis and network intrusion detection. They provide an adaption of measures of interest to our anomalous rule sets, and we propose an algorithm that can extract anomalous rules as well. Their experiments with benchmark and real-life datasets suggest that the set of anomalous rules is smaller than the set of association rules. Their work also provides evidence that our proposed approach can discover hidden patterns with good reliability.

scholarly journals Toward a Novel Laser-Based Approach for Estimating Snow Interception

2020 ◽  
Vol 12 (7) ◽  
pp. 1146 ◽  
Author(s):  
Micah Russell ◽  
Jan U. H. Eitel ◽  
Andrew J. Maguire ◽  
Timothy E. Link
Keyword(s):  
Laser Scanning ◽  
Three Dimensional ◽  
Point Clouds ◽  
Primary Objective ◽  
Snow Accumulation ◽  
Future Research ◽  
Snow Density ◽  
Canopy Interception ◽  
Terrestrial Lidar ◽  
Large Trees

Forests reduce snow accumulation on the ground through canopy interception and subsequent evaporative losses. To understand snow interception and associated hydrological processes, studies have typically relied on resource-intensive point scale measurements derived from weighed trees or indirect measurements that compared snow accumulation between forested sites and nearby clearings. Weighed trees are limited to small or medium-sized trees, and indirect comparisons can be confounded by wind redistribution of snow, branch unloading, and clearing size. A potential alternative method could use terrestrial lidar (light detection and ranging) because three-dimensional lidar point clouds can be generated for any size tree and can be utilized to calculate volume of the intercepted snow. The primary objective of this study was to provide a feasibility assessment for estimating snow interception volume with terrestrial laser scanning (TLS), providing information on challenges and opportunities for future research. During the winters of 2017 and 2018, intercepted snow masses were continuously measured for two model trees suspended from load-cells. Simultaneously, autonomous terrestrial lidar scanning (ATLS) was used to develop volumetric estimates of intercepted snow. Multiplying ATLS volume estimates by snow density estimates (derived from empirical models based on air temperature) enabled the comparison of predicted vs. measured snow mass. Results indicate agreement between predicted and measured values (R2 ≥ 0.69, RMSE ≥ 0.91 kg, slope ≥ 0.97, intercept ≥ −1.39) when multiplying TLS snow interception volume with a constant snow density estimate. These results suggest that TLS might be a viable alternative to traditional approaches for mapping snow interception, potentially useful for estimating snow loads on large trees, collecting data in difficult to access terrain, and calibrating snow interception models to new forest types around the globe.

Sign in / Sign up

Export Citation Format

Share Document