scholarly journals Isolated sensor networks for high-voltage environments using a single polymer optical fiber and LEDs for remote powering as well as data transmission

2018 ◽  
Vol 7 (1) ◽  
pp. 193-206
Author(s):  
Jakob Fischer ◽  
Timo Schuster ◽  
Christian Wächter ◽  
Michael Luber ◽  
Juri Vinogradov ◽  
...  
Keyword(s):  
Optical Fiber ◽  
High Voltage ◽  
Optical Sensor ◽  
Data Transmission ◽  
Low Cost ◽  
Data Communication ◽  
Power Converter ◽  
Sensor Data ◽  
Optical Data ◽  
Polymer Optical Fiber

Abstract. Many applications in high voltage or explosive environments require sensors which are electrically isolated from other components of a system. These sensors need remote powering as well as wireless or isolated data transmission links. A possible solution can be based on optically powered optical sensor links. These typically employ four different photonic components: for the data communication a fast LED as a transmitter and a photo diode as a receiver, furthermore for sensor powering a high-power light source and a photonic power converter. Additionally, two optical fibers are required for optical remote powering and the optical data link. In this paper we demonstrate an optically powered optical sensor link using only low-cost high-brightness LEDs and a single polymer optical fiber (POF) for all of these tasks. Coupling efficiencies, power transmission and modulation bandwidths are analyzed for LEDs with different colors. Potentials for many mW of electrical remote powering and Mbit s−1 sensor data links are demonstrated over 10 m of POF. This approach can be used for almost any electronic sensor with moderate power requirements.

scholarly journals Sensor Networks for Structures Health Monitoring: Placement, Implementations, and Challenges—A Review

Vibration ◽  
2021 ◽  
Vol 4 (3) ◽  
pp. 551-584
Author(s):  
Samir Mustapha ◽  
Ye Lu ◽  
Ching-Tai Ng ◽  
Pawel Malinowski
Keyword(s):  
Sensor Networks ◽  
Health Monitoring ◽  
Data Transmission ◽  
System Integration ◽  
Structural Integrity ◽  
Low Cost ◽  
Data Communication ◽  
Total Cost ◽  
Design And Optimization ◽  
Successful Case

The development of structural health monitoring (SHM) systems and their integration in actual structures has become a necessity as it can provide a robust and low-cost solution for monitoring the structural integrity of and the ability to predict the remaining life of structures. In this review, we aim at focusing on one of the important issues of SHM, the design, and implementation of sensor networks. Location and number of sensors, in any SHM system, are of high importance as they impact the system integration, system performance, and accuracy of assessment, as well as the total cost. Hence we are interested in shedding the light on the sensor networks as an essential component of SHM systems. The review discusses several important parameters including design and optimization of sensor networks, development of academic and commercial solutions, powering of sensors, data communication, data transmission, and analytics. Finally, we presented some successful case studies including the challenges and limitations associated with the sensor networks.

scholarly journals Polymer Optical Fiber-Based Respiratory Sensors: Various Designs and Implementations

2019 ◽  
Vol 2019 ◽  
pp. 1-6
Author(s):  
A. Arifin ◽  
Nelly Agustina ◽  
Syamsir Dewang ◽  
Irfan Idris ◽  
Dahlang Tahir
Keyword(s):  
Optical Fiber ◽  
Measurement System ◽  
Output Voltage ◽  
Low Cost ◽  
Optical Fiber Sensor ◽  
Digital Signal ◽  
Analog Signal ◽  
Fiber Sensor ◽  
Polymer Optical Fiber ◽  
Arduino Uno

This research discusses the polymer optical fiber sensor for respiratory measurements. The infrared LED that produces light will propagate along the polymer optical fiber which will be received by the phototransistor and the differential amplifier. The output voltage in the form of an analog signal will be converted to a digital signal by the Arduino Uno microcontroller and displayed on the computer. The polymer optical fiber sensor is installed on the corset using a variety of configuration (straight, sinusoidal, and spiral), placed in the abdomen, and a variety of positions (abdomen, chest, and back) using only a spiral configuration. While doing the inspiration, the stomach will be enlarged so that the optical fiber sensor will have strain. The strain will cause loss of power, the resulting light intensities received by the phototransistor are reduced, and the output voltage on the computer decreases. The result shows that the highest voltage amplitudes were in the spiral configuration placed in the abdominal position for slow respiration measurements with the highest range, sensitivity, and resolution which are 0.119 V, 0.238 V/s, and 0.004 s, respectively. The advantages of our work are emphasized on measurement system simplicity, low cost, easy fabrication, and handy operation and can be connected with the Arduino Uno microcontroller and computer.

scholarly journals Vortex Polymer Optical Fiber with 64 Stable OAM States

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2776
Author(s):  
José A. Borda-Hernández ◽  
Claudia M. Serpa-Imbett ◽  
Hugo E. Hernandez Figueroa
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Communication Systems ◽  
Low Cost ◽  
Higher Order ◽  
Coupling Coefficients ◽  
Polymer Optical Fiber ◽  
Optical Polymer ◽  
Polymer Optical Fibers ◽  
Low Dispersion

This research introduces a numerical design of an air-core vortex polymer optical fiber in cyclic transparent optical polymer (CYTOP) that propagates 32 orbital angular momentum (OAM) modes, i.e., it may support up to 64 stable OAM-states considering left- and right-handed circular polarizations. This fiber seeks to be an alternative to increase the capacity of short-range optical communication systems multiplexed by modes, in agreement with the high demand of low-cost, insensitive-to-bending and easy-to-handle fibers similar to others optical fibers fabricated in polymers. This novel fiber possesses unique characteristics: a diameter of 50 µm that would allow a high mechanical compatibility with commercially available polymer optical fibers, a difference of effective index between neighbor OAM modes of around 10−4 over a bandwidth from 1 to 1.6 µm, propagation losses of approximately 15 × 10−3 dB/m for all OAM modes, and a very low dispersion for OAM higher order modes (±l = 16) of up to +2.5 ps/km-nm compared with OAM lower order modes at a telecom wavelength of 1.3 µm, in which the CYTOP exhibits a minimal attenuation. The spectra of mutual coupling coefficients between modes are computed considering small bends of up to 3 cm of radius and slight ellipticity in the ring of up to 5%. Results show lower-charge weights for higher order OAM modes.

Formation of the refractive index profile in the graded index polymer optical fiber for gigabit data transmission

1997 ◽  
Vol 15 (11) ◽  
pp. 2095-2100 ◽  
Author(s):  
T. Ishigure ◽  
M. Satoh ◽  
O. Takanashi ◽  
E. Nihei ◽  
T. Nyu ◽  
...  
Keyword(s):  
Refractive Index ◽  
Optical Fiber ◽  
Data Transmission ◽  
Refractive Index Profile ◽  
Index Profile ◽  
Polymer Optical Fiber ◽  
Graded Index

scholarly journals Optical data transmission at 44 Tb/s with a single integrated chip source

2021 ◽  
Author(s):  
David Moss
Keyword(s):  
Optical Fiber ◽  
Data Transmission ◽  
Optical Data ◽  
World Record ◽  
Optical Source ◽  
Fiber Network ◽  
High Data ◽  
Modulation Format ◽  
Intrinsic Efficiency ◽  
Very High

<p>We report world record high data transmission over standard optical fiber from a single optical source. We achieve a line rate of 44.2 Terabits per second (Tb/s) employing only the C-band at 1550nm, resulting in a spectral efficiency of 10.4 bits/s/Hz. We use a new and powerful class of micro-comb called soliton crystals that exhibit robust operation and stable generation as well as a high intrinsic efficiency that, together with an extremely low spacing of 48.9 GHz enables a very high coherent data modulation format of 64 QAM. We achieve error free transmission across 75 km of standard optical fiber in the lab and over a field trial with a metropolitan optical fiber network. This work demonstrates the ability of optical micro-combs to exceed other approaches in performance for the most demanding practical optical communications applications.</p>

scholarly journals Optical data transmission at 44 Terabits/s with a 49GHz Kerr soliton crystal microcomb

2020 ◽  
Author(s):  
David Moss
Keyword(s):  
Optical Fiber ◽  
Data Transmission ◽  
Optical Data ◽  
World Record ◽  
Optical Source ◽  
Fiber Network ◽  
High Data ◽  
Modulation Format ◽  
Intrinsic Efficiency ◽  
Very High

We report world record high data transmission over standard optical fiber from a single optical source. We achieve a line rate of 44.2 Terabits per second (Tb/s) employing only the C-band at 1550nm, resulting in a spectral efficiency of 10.4 bits/s/Hz. We use a new and powerful class of micro-comb called soliton crystals that exhibit robust operation and stable generation as well as a high intrinsic efficiency that, together with an extremely low spacing of 48.9 GHz enables a very high coherent data modulation format of 64 QAM. We achieve error free transmission across 75 km of standard optical fiber in the lab and over a field trial with a metropolitan optical fiber network. This work demonstrates the ability of optical micro-combs to exceed other approaches in performance for the most demanding practical optical communications applications.

Low-cost fused taper polymer optical fiber (LFT-POF) splitters for environmental and home-networking solution

2017 ◽  
Author(s):  
Latifah S. Supian ◽  
Mohammad Syuhaimi Ab-Rahman ◽  
Hadi Guna ◽  
Hazwan Harun ◽  
Malik Sulaiman ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Low Cost ◽  
Polymer Optical Fiber ◽  
Home Networking
Sign in / Sign up

Export Citation Format

Share Document