scholarly journals Data assimilation of Soil Moisture and Ocean Salinity (SMOS) observations into the Mercator Ocean operational system: focus on the El Niño 2015 event

Ocean Science ◽  
2019 ◽  
Vol 15 (3) ◽  
pp. 543-563 ◽  
Author(s):  
Benoît Tranchant ◽  
Elisabeth Remy ◽  
Eric Greiner ◽  
Olivier Legalloudec
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Bias Correction ◽  
Positive Impact ◽  
El Nino ◽  
Sea Surface ◽  
Convergence Zone ◽  
Data Sets ◽  
Surface Salinity ◽  
Ocean Salinity

Abstract. Monitoring sea surface salinity (SSS) is important for understanding and forecasting the ocean circulation. It is even crucial in the context of the intensification of the water cycle. Until recently, SSS was one of the less observed essential ocean variables. Only sparse in situ observations, mostly closer to 5 m depth than the surface, were available to estimate the SSS. The recent satellite ESA Soil Moisture and Ocean Salinity (SMOS), NASA Aquarius SAC-D and Soil Moisture Active Passive (SMAP) missions have made it possible for the first time to measure SSS from space and can bring a valuable additional constraint to control the model salinity. Nevertheless, satellite SSS still contains some residual biases that must be removed prior to bias correction and data assimilation. One of the major challenges of this study is to estimate the SSS bias and a suitable observation error for the data assimilation system. It was made possible by modifying a 3D-Var bias correction scheme and by using the analysis of the residuals and errors with an adapted statistical technique. This article presents the design and the analysis of an observing system experiment (OSE) conducted with the 0.25∘ resolution Mercator Ocean global analysis and forecasting system during the El Niño 2015/16 event. The SSS data assimilation constrains the model to be closer to the near-surface salinity observations in a coherent way with the other data sets already routinely assimilated in an operational context. This also shows that the overestimation of E–P is corrected by data assimilation through salting in regions where precipitations are higher. Globally, the SMOS SSS assimilation has a positive impact in salinity over the top 30 m. Comparisons to independent salinity data sets show a small but positive impact and corroborate the fact that the impact of SMOS SSS assimilation is larger in the Intertropical Convergence Zone (ITCZ) and South Pacific Convergence Zone (SPCZ) regions. There is little impact on the sea surface temperature (SST) and sea surface height (SSH) error statistics. Nevertheless, the SSH seems to be impacted by the tropical instability wave (TIW) propagation, itself linked to changes in barrier layer thickness (BLT). Finally, this study helped us to progress in the understanding of the biases and errors that can degrade the SMOS SSS data assimilation performance.

scholarly journals The Role of Averaging for Improving Sea Surface Salinity Retrieval from the Soil Moisture and Ocean Salinity (SMOS) Satellite and Impact of Auxiliary Data

2007 ◽  
Vol 24 (2) ◽  
pp. 255-269 ◽  
Author(s):  
Sabine Philipps ◽  
Christine Boone ◽  
Estelle Obligis
Keyword(s):  
Soil Moisture ◽  
Sensitivity Study ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Global Ocean ◽  
Surface Salinity ◽  
Auxiliary Data ◽  
Additional Information ◽  
Ocean Salinity

Abstract Soil Moisture and Ocean Salinity (SMOS) was chosen as the European Space Agency’s second Earth Explorer Opportunity mission. One of the objectives is to retrieve sea surface salinity (SSS) from measured brightness temperatures (TBs) at L band with a precision of 0.2 practical salinity units (psu) with averages taken over 200 km by 200 km areas and 10 days [as suggested in the requirements of the Global Ocean Data Assimilation Experiment (GODAE)]. The retrieval is performed here by an inverse model and additional information of auxiliary SSS, sea surface temperature (SST), and wind speed (W). A sensitivity study is done to observe the influence of the TBs and auxiliary data on the SSS retrieval. The key role of TB and W accuracy on SSS retrieval is verified. Retrieval is then done over the Atlantic for two cases. In case A, auxiliary data are simulated from two model outputs by adding white noise. The more realistic case B uses independent databases for reference and auxiliary ocean parameters. For these cases, the RMS error of retrieved SSS on pixel scale is around 1 psu (1.2 for case B). Averaging over GODAE scales reduces the SSS error by a factor of 12 (4 for case B). The weaker error reduction in case B is most likely due to the correlation of errors in auxiliary data. This study shows that SSS retrieval will be very sensitive to errors on auxiliary data. Specific efforts should be devoted to improving the quality of auxiliary data.

scholarly journals Assessing Coastal SMAP Surface Salinity Accuracy and Its Application to Monitoring Gulf of Maine Circulation Dynamics

2018 ◽  
Vol 10 (8) ◽  
pp. 1232 ◽  
Author(s):  
Semyon Grodsky ◽  
Douglas Vandemark ◽  
Hui Feng
Keyword(s):  
Soil Moisture ◽  
Gulf Of Maine ◽  
Contamination Factor ◽  
Early Spring ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Surface Salinity ◽  
Sensor Sensitivity ◽  
Ocean Salinity ◽  
Circulation Dynamics

Monitoring the cold and productive waters of the Gulf of Maine and their interactions with the nearby northwestern (NW) Atlantic shelf is important but challenging. Although remotely sensed sea surface temperature (SST), ocean color, and sea level have become routine, much of the water exchange physics is reflected in salinity fields. The recent invention of satellite salinity sensors, including the Soil Moisture Active Passive (SMAP) radiometer, opens new prospects in regional shelf studies. However, local sea surface salinity (SSS) retrieval is challenging due to both cold SST limiting salinity sensor sensitivity and proximity to land. For the NW Atlantic, our analysis shows that SMAP SSS is subject to an SST-dependent bias that is negative and amplifies in winter and early spring due to the SST-related drop in SMAP sensor sensitivity. On top of that, SMAP SSS is subject to a land contamination bias. The latter bias becomes noticeable and negative when the antenna land contamination factor (LC) exceeds 0.2%, and attains maximum negative values at LC = 0.4%. Coastward of LC = 0.5%, a significant positive land contamination bias in absolute SMAP SSS is evident. SST and land contamination bias components are seasonally dependent due to seasonal changes in SST/winds and terrestrial microwave properties. Fortunately, it is shown that SSS anomalies computed relative to a satellite SSS climatology can effectively remove such seasonal biases along with the real seasonal cycle. SMAP monthly SSS anomalies have sufficient accuracy and applicability to extend nearer to the coasts. They are used to examine the Gulf of Maine water inflow, which displayed important water intrusions in between Georges Banks and Nova Scotia in the winters of 2016/17 and 2017/18. Water intrusion patterns observed by SMAP are generally consistent with independent measurements from the European Soil Moisture Ocean Salinity (SMOS) mission. Circulation dynamics related to the 2016/2017 period and enhanced wind-driven Scotian Shelf transport into the Gulf of Maine are discussed.

scholarly journals Data assimilation of SMOS observations into the Mercator Ocean operational system: focus on the Nino 2015 event

2018 ◽  
Author(s):  
Benoît Tranchant ◽  
Elisabeth Remy ◽  
Eric Greiner ◽  
Olivier Legalloudec
Keyword(s):  
Data Assimilation ◽  
Ocean Circulation ◽  
Positive Impact ◽  
Atmospheric Precipitation ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Global Ocean ◽  
Data Sets ◽  
The Impact ◽  
Over The Top

Abstract. Monitoring Sea Surface Salinity (SSS) is important for understanding and forecasting the ocean circulation. It is even crucial in the context of the acceleration of the water cycle. Until recently, SSS was one of the less observed essential ocean variables. Only sparse in situ observations, most often closer to 5 meters deep than the surface, were available to estimate the SSS. The recent satellite missions of ESA's SMOS, NASA's Aquarius, and now SMAP have made possible for the first time to measure SSS from space. The SSS drivers can be quite different than the temperature ones. The model SSS can suffer from significant errors coming not only from the ocean dynamical model but also the atmospheric precipitation and evaporation as well as ice melting and river runoff. Satellite SSS can bring a valuable additional constraint to control the model salinity. In the framework of the SMOS Nino 2015 ESA project (https://www.godae-oceanview.org/projects/smos-nino15/), the impact of satellite SSS data assimilation is assessed with the Met Office and Mercator Ocean global ocean analysis and forecasting systems with a focus on the Tropical Pacific region. This article presents the analysis of an Observing System Experiment (OSE) conducted with the 1/4° resolution Mercator Ocean analysis and forecasting system. SSS data assimilation constrains the model SSS to be closer to the observations in a coherent way with the other data sets already routinely assimilated in an operational context. Globally, the SMOS SSS assimilation has a positive impact in salinity over the top 30 meters. Comparisons to independent data sets show a small but positive impact. The sea surface height (SSH) has also been impacted by implying a reinforcement of TIWs during the El-Niño 2015/16 event. Finally, this study helped us to progress in the understanding of the biases and errors that can degrade the SMOS SSS performance.

Validation and correction of sea surface salinity retrieval from SMAP

2020 ◽  
Author(s):  
Sisi Qin
Keyword(s):  
Soil Moisture ◽  
In Situ Measurements ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Surface Salinity ◽  
Tropical Regions ◽  
Ocean Salinity ◽  
Forecast Models ◽  
Level 3

<p>In this study, Sea Surface Salinity (SSS) Level 3 (L3) daily product derived from Soil Moisture Active Passive (SMAP) during the year 2016, was validated and compared with SSS daily products derived from Soil Moisture and Ocean Salinity (SMOS) and in-situ measurements. Generally, the Root Mean Square Error (RMSE) of the daily SSS products is larger along the coastal areas and at high latitudes and is smaller in the tropical regions and open oceans. Comparisons between the two types of daily satellite SSS product revealed that the RMSE was higher in the daily SMOS product than in the SMAP, whereas the bias of the daily SMOS was observed to be less than that of the SMAP when compared with Argo floats data. In addition, the latitude-dependent bias and RMSE of the SMAP SSS were found to be primarily influenced by the precipitation and the Sea Surface Temperature (SST).Then, aregression analysis method which has adopted the precipitation and SST data was used to correct the larger bias of the daily SMAP product. It was confirmed that the corrected daily SMAP product could be used for assimilation in high-resolution forecast models, due to the fact that it was demonstrated to be unbiased and much closer to the in-situ measurements than the original uncorrected SMAP product.</p>

scholarly journals Evaluating the utility of satellite soil moisture retrievals over irrigated areas and the ability of land data assimilation methods to correct for unmodeled processes

2015 ◽  
Vol 12 (6) ◽  
pp. 5967-6009 ◽  
Author(s):  
S. V. Kumar ◽  
C. D. Peters-Lidard ◽  
J. A. Santanello ◽  
R. H. Reichle ◽  
C. S. Draper ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Bias Correction ◽  
Land Surface ◽  
Earth Observing System ◽  
Surface Models ◽  
Ocean Salinity ◽  
Natural Land ◽  
Land Data Assimilation ◽  
Correction Strategies

Abstract. The Earth's land surface is characterized by tremendous natural heterogeneity and human engineered modifications, both of which are challenging to represent in land surface models. Satellite remote sensing is often the most practical and effective method to observe the land surface over large geographical areas. Agricultural irrigation is an important human induced modifications to natural land surface processes, as it is pervasive across the world and because of its significant influence on the regional and global water budgets. In this article, irrigation is used as an example of a human engineered, unmodeled land surface process, and the utility of satellite soil moisture retrievals over irrigated areas in the continental US is examined. Such retrievals are based on passive or active microwave observations from the Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR-E), the Advanced Microwave Scanning Radiometer 2 (AMSR2), the Soil Moisture Ocean Salinity (SMOS) mission, WindSat and the Advanced Scatterometer (ASCAT). The analysis suggests that the skill of these retrievals for representing irrigation artifacts is mixed, with ASCAT based products somewhat more skillful than SMOS and AMSR2 products. The article then examines the suitability of typical bias correction strategies in current land data assimilation systems when unmodeled processes dominate the bias between the model and the observations. Using a suite of synthetic experiments that includes bias correction strategies such as quantile mapping and trained forward modeling, it is demonstrated that the bias correction practices lead to the exclusion of the signals from unmodeled processes, if these processes are the major source of the biases. It is further shown that new methods are needed to preserve the observational information about unmodeled processes during data assimilation.

scholarly journals Sea Surface Salinity with SMOS

2017 ◽  
Vol 1 (1) ◽  
Author(s):  
Mulyadi Abdul Wahid
Keyword(s):  
Soil Moisture ◽  
Microwave Radiometer ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Normal Operation ◽  
Surface Salinity ◽  
Processing Centre ◽  
Ocean Salinity ◽  
Long Time ◽  
A New Technique

The mission to observe the Sea Surface Salinity (SSS) from the space is not really new because it has been started from long time ago. The first mission was the Skylab which used a 1.4 GHz microwave radiometer in 1970’s. But this mission is still not as comprehensive as other missions which observe such as Sea Surface Temperature (SST), Sea Surface Height (SSH), Ocean Color, and so on. Realizing the importance of SSS distribution in the ocean and its influences to the Earth’s climate system has motivated the scientists to develop a new technique in observing the SSS from space and lead a mission called the SMOS mission which was launched in November 2, 2011. Besides observing the SSS, this mission observes the Soil Moisture as well. The Soil Moisture and Ocean Salinity (SMOS) mission aims to obtain global and regular measurements on the soil moisture and the ocean salinity. These measurements are essential for climate and hydrological models, among other purposes. SMOS payload is a L band (21 cm, 1.4 GHz) 2D interferometric radiometer on a generic Proteus platform. The mission lifetime is at least 3 years (0.5 for commissioning and 2.5 for normal operation) + 2 years (extended operation) + 10 years for the post-mission processing. Raw physical data, level 1 and level 2 products will be produced by the PDPC (SMOS Payload Data and Processing Centre). It is an ESA center located in Villafranca (Spain) and operated under the responsibility of ESA. The SMOS Ocean Salinity objective is accuracy better than 0.1 psu, with 10 days to monthly grid scale (200 km).

scholarly journals Evaluating the utility of satellite soil moisture retrievals over irrigated areas and the ability of land data assimilation methods to correct for unmodeled processes

2015 ◽  
Vol 19 (11) ◽  
pp. 4463-4478 ◽  
Author(s):  
S. V. Kumar ◽  
C. D. Peters-Lidard ◽  
J. A. Santanello ◽  
R. H. Reichle ◽  
C. S. Draper ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Bias Correction ◽  
Land Surface ◽  
Earth Observing System ◽  
Ocean Salinity ◽  
Natural Land ◽  
Land Data Assimilation ◽  
Irrigation Effects ◽  
Correction Strategies

Abstract. Earth's land surface is characterized by tremendous natural heterogeneity and human-engineered modifications, both of which are challenging to represent in land surface models. Satellite remote sensing is often the most practical and effective method to observe the land surface over large geographical areas. Agricultural irrigation is an important human-induced modification to natural land surface processes, as it is pervasive across the world and because of its significant influence on the regional and global water budgets. In this article, irrigation is used as an example of a human-engineered, often unmodeled land surface process, and the utility of satellite soil moisture retrievals over irrigated areas in the continental US is examined. Such retrievals are based on passive or active microwave observations from the Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR-E), the Advanced Microwave Scanning Radiometer 2 (AMSR2), the Soil Moisture Ocean Salinity (SMOS) mission, WindSat and the Advanced Scatterometer (ASCAT). The analysis suggests that the skill of these retrievals for representing irrigation effects is mixed, with ASCAT-based products somewhat more skillful than SMOS and AMSR2 products. The article then examines the suitability of typical bias correction strategies in current land data assimilation systems when unmodeled processes dominate the bias between the model and the observations. Using a suite of synthetic experiments that includes bias correction strategies such as quantile mapping and trained forward modeling, it is demonstrated that the bias correction practices lead to the exclusion of the signals from unmodeled processes, if these processes are the major source of the biases. It is further shown that new methods are needed to preserve the observational information about unmodeled processes during data assimilation.

scholarly journals Global Analysis of Coastal Gradients of Sea Surface Salinity

2021 ◽  
Vol 13 (13) ◽  
pp. 2507
Author(s):  
Alina N. Dossa ◽  
Gaël Alory ◽  
Alex Costa da Silva ◽  
Adeola M. Dahunsi ◽  
Arnaud Bertrand
Keyword(s):  
Soil Moisture ◽  
Water Cycle ◽  
Global Analysis ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Coastal Processes ◽  
In Situ Observation ◽  
Surface Salinity ◽  
Ocean Salinity ◽  
Satellite Missions

Sea surface salinity (SSS) is a key variable for ocean–atmosphere interactions and the water cycle. Due to its climatic importance, increasing efforts have been made for its global in situ observation, and dedicated satellite missions have been launched more recently to allow homogeneous coverage at higher resolution. Cross-shore SSS gradients can bear the signature of different coastal processes such as river plumes, upwelling or boundary currents, as we illustrate in a few regions. However, satellites performances are questionable in coastal regions. Here, we assess the skill of four gridded products derived from the Soil Moisture Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP) satellites and the GLORYS global model reanalysis at capturing cross-shore SSS gradients in coastal bands up to 300 km wide. These products are compared with thermosalinography (TSG) measurements, which provide continuous data from the open ocean to the coast along ship tracks. The comparison shows various skills from one product to the other, decreasing as the coast gets closer. The bias in reproducing coastal SSS gradients is unrelated to how the SSS biases evolve with the distance to the coast. Despite limited skill, satellite products generally agree better with collocated TSG data than a global reanalysis and show a large range of coastal SSS gradients with different signs. Moreover, satellites reveal a global dominance of coastal freshening, primarily related to river runoff over shelves. This work shows a great potential of SSS remote sensing to monitor coastal processes, which would, however, require a jump in the resolution of future SSS satellite missions to be fully exploited.

Sign in / Sign up

Export Citation Format

Share Document