scholarly journals Antarctic sub-shelf melt rates via PICO

2018 ◽  
Vol 12 (6) ◽  
pp. 1969-1985 ◽  
Author(s):  
Ronja Reese ◽  
Torsten Albrecht ◽  
Matthias Mengel ◽  
Xylar Asay-Davis ◽  
Ricarda Winkelmann
Keyword(s):  
Ocean Circulation ◽  
Ice Sheet ◽  
Ice Shelf ◽  
Amundsen Sea ◽  
Ice Shelves ◽  
Continental Scale ◽  
Wide Range ◽  
The Antarctic ◽  
Fully Coupled

Abstract. Ocean-induced melting below ice shelves is one of the dominant drivers for mass loss from the Antarctic Ice Sheet at present. An appropriate representation of sub-shelf melt rates is therefore essential for model simulations of marine-based ice sheet evolution. Continental-scale ice sheet models often rely on simple melt-parameterizations, in particular for long-term simulations, when fully coupled ice–ocean interaction becomes computationally too expensive. Such parameterizations can account for the influence of the local depth of the ice-shelf draft or its slope on melting. However, they do not capture the effect of ocean circulation underneath the ice shelf. Here we present the Potsdam Ice-shelf Cavity mOdel (PICO), which simulates the vertical overturning circulation in ice-shelf cavities and thus enables the computation of sub-shelf melt rates consistent with this circulation. PICO is based on an ocean box model that coarsely resolves ice shelf cavities and uses a boundary layer melt formulation. We implement it as a module of the Parallel Ice Sheet Model (PISM) and evaluate its performance under present-day conditions of the Southern Ocean. We identify a set of parameters that yield two-dimensional melt rate fields that qualitatively reproduce the typical pattern of comparably high melting near the grounding line and lower melting or refreezing towards the calving front. PICO captures the wide range of melt rates observed for Antarctic ice shelves, with an average of about 0.1 m a−1 for cold sub-shelf cavities, for example, underneath Ross or Ronne ice shelves, to 16 m a−1 for warm cavities such as in the Amundsen Sea region. This makes PICO a computationally feasible and more physical alternative to melt parameterizations purely based on ice draft geometry.

scholarly journals Antarctic sub-shelf melt rates via PICO

2017 ◽  
Author(s):  
Ronja Reese ◽  
Torsten Albrecht ◽  
Matthias Mengel ◽  
Xylar Asay-Davis ◽  
Ricarda Winkelmann
Keyword(s):  
Ocean Circulation ◽  
Ice Sheet ◽  
Ice Shelf ◽  
Amundsen Sea ◽  
Ice Shelves ◽  
Continental Scale ◽  
Wide Range ◽  
The Antarctic ◽  
Fully Coupled

Abstract. Ocean-induced melting below ice shelves is one of the dominant drivers for mass loss from the Antarctic Ice Sheet at present. An appropriate representation of sub-shelf melt rates is therefore essential for model simulations of marine-based ice sheet evolution. Continental-scale ice sheet models often rely on simple melt-parameterizations, in particular for long-term simulations, when fully coupled ice-ocean interaction becomes computationally too expensive. Such parameterizations can account for the influence of the local depth of the ice-shelf draft or its slope on melting. However, they do not capture the effect of ocean circulation underneath the ice-shelf. Here we present the Potsdam Ice-shelf Cavity mOdel (PICO), which simulates the vertical overturning circulation in ice-shelf cavities and thus enables the computation of sub-shelf melt rates consistent with this circulation. PICO is based on an ocean box model that coarsely resolves ice shelf cavities and uses a boundary layer melt formulation. We implement it as a module of the Parallel Ice Sheet Model (PISM) and evaluate its performance under present-day conditions of the Southern Ocean. The two-dimensional melt rate fields provided by the model reproduce the typical pattern of comparably high melting near the grounding line and lower melting or refreezing towards the calving front. PICO captures the wide range of melt rates observed for Antarctic ice shelves, with an average of about 0.1 m a−1 for cold sub-shelf cavities, for example underneath Ross or Ronne ice shelves, to 12 m a−1 for warm cavities such as in the Amundsen Sea region. This makes PICO a computationally-feasible and more physical alternative to melt parameterizations purely based on ice draft geometry.

scholarly journals Melting and freezing under Antarctic ice shelves from a combination of ice-sheet modelling and observations

2017 ◽  
Vol 63 (240) ◽  
pp. 731-744 ◽  
Author(s):  
JORGE BERNALES ◽  
IRINA ROGOZHINA ◽  
MAIK THOMAS
Keyword(s):  
Mass Balance ◽  
Ice Sheet ◽  
Model Parameters ◽  
Ice Shelf ◽  
Ice Shelves ◽  
Continental Scale ◽  
Model Set ◽  
Set Up ◽  
Basal Melting ◽  
The Antarctic

ABSTRACTIce-shelf basal melting is the largest contributor to the negative mass balance of the Antarctic ice sheet. However, current implementations of ice/ocean interactions in ice-sheet models disagree with the distribution of sub-shelf melt and freezing rates revealed by recent observational studies. Here we present a novel combination of a continental-scale ice flow model and a calibration technique to derive the spatial distribution of basal melting and freezing rates for the whole Antarctic ice-shelf system. The modelled ice-sheet equilibrium state is evaluated against topographic and velocity observations. Our high-resolution (10-km spacing) simulation predicts an equilibrium ice-shelf basal mass balance of −1648.7 Gt a−1 that increases to −1917.0 Gt a−1 when the observed ice-shelf thinning rates are taken into account. Our estimates reproduce the complexity of the basal mass balance of Antarctic ice shelves, providing a reference for parameterisations of sub-shelf ocean/ice interactions in continental ice-sheet models. We perform a sensitivity analysis to assess the effects of variations in the model set-up, showing that the retrieved estimates of basal melting and freezing rates are largely insensitive to changes in the internal model parameters, but respond strongly to a reduction of model resolution and the uncertainty in the input datasets.

scholarly journals Modelling the long-term response of the Antarctic ice sheet to global warming

1998 ◽  
Vol 27 ◽  
pp. 161-168 ◽  
Author(s):  
Roland C. Warner ◽  
W.Κ. Budd
Keyword(s):  
Global Warming ◽  
Mass Loss ◽  
Ice Sheet ◽  
Ice Shelf ◽  
Antarctic Ice Sheet ◽  
Ice Shelves ◽  
Basal Melting ◽  
The Antarctic ◽  
Term Response

The primary effects of global warming on the Antarctic ice sheet can involve increases in surface melt for limited areas at lower elevations, increases in net accumulation, and increased basal melting under floating ice. For moderate global wanning, resulting in ocean temperature increases of a few °C, the large- increase in basal melting can become the dominant factor in the long-term response of the ice sheet. The results from ice-sheet modelling show that the increased basal melt rates lead to a reduction of the ice shelves, increased strain rates and flow at the grounding lines, then thinning and floating of the marine ice sheets, with consequential further basal melting. The mass loss from basal melting is counteracted to some extent by the increased accumulation, but in the long term the area of ice cover decreases, particularly in West Antarctica, and the mass loss can dominate. The ice-sheet ice-shelf model of Budd and others (1994) with 20 km resolution has been modified and used to carry out a number of sensitivity studies of the long-term response of the ice sheet to prescribed amounts of global warming. The changes in the ice sheet are computed out to near-equilibrium, but most of the changes take place with in the first lew thousand years. For a global mean temperature increase of 3°C with an ice-shelf basal melt rate of 5 m a−1 the ice shelves disappear with in the first few hundred years, and the marine-based parts of the ice sheet thin and retreat. By 2000 years the West Antarctic region is reduced to a number of small, isolated ice caps based on the bedrock regions which are near or above sea level. This allows the warmer surface ocean water to circulate through the archipelago in summer, causing a large change to the local climate of the region.

An assessment of basal melting parameterisations for Antarctic ice shelves

2021 ◽  
Author(s):  
Clara Burgard ◽  
Nicolas Jourdain
Keyword(s):  
Climate Model ◽  
Ice Sheet ◽  
Coupled Model ◽  
Ice Shelf ◽  
Antarctic Ice Sheet ◽  
Ice Shelves ◽  
Global Sea Level ◽  
Basal Melting ◽  
The Antarctic

<p>Ocean-induced melting at the base of ice shelves is one of the main drivers of the currently observed mass loss of the Antarctic Ice Sheet. A good understanding of the interaction between ice and ocean at the base of the ice shelves is therefore crucial to understand and project the Antarctic contribution to global sea-level rise. </p><p>Due to the high difficulty to monitor these regions, our understanding of the processes at work beneath ice shelves is limited. Still, several parameterisations of varying complexity have been developed in past decades to describe the ocean-induced sub-shelf melting. These parameterisations can be implemented into standalone ice-sheet models, for example when conducting long-term projections forced with climate model output.</p><p>An assessment of the performance of these parameterisations was conducted in an idealised setup (Favier et al, 2019). However, the application of the better-performing parameterisations in a more realistic setup (e.g. Jourdain et al., 2020) has shown that individual adjustments and corrections are needed for each ice shelf.</p><p>In this study, we revisit the assessment of the parameterisations, this time in a more realistic setup than previous studies. To do so, we apply the different parameterisations on several ice shelves around Antarctica and compare the resulting melt rates to satellite and oceanographic estimates. Based on this comparison, we will refine the parameters and propose an approach to reduce uncertainties in long-term sub-shelf melting projections.</p><p><em>References</em><br><em>- Favier, L., Jourdain, N. C., Jenkins, A., Merino, N., Durand, G., Gagliardini, O., Gillet-Chaulet, F., and Mathiot, P.: Assessment of sub-shelf melting parameterisations using the ocean–ice-sheet coupled model NEMO(v3.6)–Elmer/Ice(v8.3) , Geosci. Model Dev., 12, 2255–2283, https://doi.org/10.5194/gmd-12-2255-2019, 2019. </em><br><em>- Jourdain, N. C., Asay-Davis, X., Hattermann, T., Straneo, F., Seroussi, H., Little, C. M., and Nowicki, S.: A protocol for calculating basal melt rates in the ISMIP6 Antarctic ice sheet projections, The Cryosphere, 14, 3111–3134, https://doi.org/10.5194/tc-14-3111-2020, 2020. </em></p>

scholarly journals Brief communication: PICOP, a new ocean melt parameterization under ice shelves combining PICO and a plume model

2019 ◽  
Vol 13 (3) ◽  
pp. 1043-1049 ◽  
Author(s):  
Tyler Pelle ◽  
Mathieu Morlighem ◽  
Johannes H. Bondzio
Keyword(s):  
Ocean Circulation ◽  
Numerical Models ◽  
Three Dimensional ◽  
Ice Sheet ◽  
Ice Shelf ◽  
Ice Streams ◽  
Amundsen Sea ◽  
Ice Shelves ◽  
Grounding Line ◽  
Basal Melting

Abstract. Basal melting at the bottom of Antarctic ice shelves is a major control on glacier dynamics, as it modulates the amount of buttressing that floating ice shelves exert onto the ice streams feeding them. Three-dimensional ocean circulation numerical models provide reliable estimates of basal melt rates but remain too computationally expensive for century-scale projections. Ice sheet modelers therefore routinely rely on simplified parameterizations based on either ice shelf depth or more sophisticated box models. However, existing parameterizations do not accurately resolve the complex spatial patterns of sub-shelf melt rates that have been observed over Antarctica's ice shelves, especially in the vicinity of the grounding line, where basal melting is one of the primary drivers of grounding line migration. In this study, we couple the Potsdam Ice-shelf Cavity mOdel (PICO, Reese et al., 2018) to a buoyant plume melt rate parameterization (Lazeroms et al., 2018) to create PICOP, a novel basal melt rate parameterization that is easy to implement in transient ice sheet numerical models and produces a melt rate field that is in excellent agreement with the spatial distribution and magnitude of observations for several ocean basins. We test PICOP on the Amundsen Sea sector of West Antarctica, Totten, and Moscow University ice shelves in East Antarctica and the Filchner-Ronne Ice Shelf and compare the results to PICO. We find that PICOP is able to reproduce inferred high melt rates beneath Pine Island, Thwaites, and Totten glaciers (on the order of 100 m yr−1) and removes the “banding” pattern observed in melt rates produced by PICO over the Filchner-Ronne Ice Shelf. PICOP resolves many of the issues contemporary basal melt rate parameterizations face and is therefore a valuable tool for those looking to make future projections of Antarctic glaciers.

scholarly journals Brief communication: PICOP, a new ocean melt parameterization under ice shelves combining PICO and a plume model

2018 ◽  
Author(s):  
Tyler Pelle ◽  
Mathieu Morlighem ◽  
Johannes H. Bondzio
Keyword(s):  
Ocean Circulation ◽  
Numerical Models ◽  
Three Dimensional ◽  
Ice Sheet ◽  
Ice Shelf ◽  
Ice Streams ◽  
Amundsen Sea ◽  
Ice Shelves ◽  
Box Models ◽  
Grounding Line

Abstract. Basal melt at the bottom of Antarctic ice shelves is a major control on glacier dynamics, as it modulates the amount of buttressing that floating ice shelves exert onto the ice streams feeding them. Three-dimensional ocean circulation numerical models provide reliable estimates of basal melt rates but remain too computationally expensive for century scale projections. Ice sheet modelers therefore routinely rely on simplified parameterizations either based on ice shelf depth or on more sophisticated box models. However, existing parameterizations do not accurately resolve the complex spatial patterns of sub-shelf melt rates that have been observed over Antarctica's ice shelves, especially in the vicinity of the grounding line, where basal melt is one of the primary drivers of grounding line migration. In this study, we couple the Potsdam Ice-shelf Cavity mOdel (PICO) to a buoyant Plume melt rate parameterization to create PICOP, a novel basal melt rate parameterization that is easy to implement in transient ice sheet numerical models and produces a melt rate field that is in excellent agreement with the spatial distribution and magnitude of observations for a wide variety of ocean basins. We test PICOP on the Amundsen Sea sector of West Antarctica, Totten and Moscow University ice shelves in Eastern Antarctica, and the Ronne-Filchner ice shelf and compare the results to PICO. We find that PICOP is able to reproduce the high melt rates near the grounding lines of Pine Island, Thwaites, and Totten glaciers (on the order of 100 m/yr) and removes the “banding” pattern observed in melt rates produced by PICO over the Ronne-Filchner ice shelf. PICOP resolves many of the issues contemporary basal melt rate parameterizations face and is therefore a valuable tool for those looking to make future projections of Antarctic glaciers.

Antarctic ice sheet response to upper-bound scenarios

2021 ◽  
Author(s):  
Sainan Sun ◽  
Frank Pattyn
Keyword(s):  
Sea Level Rise ◽  
Sea Level ◽  
Upper Bound ◽  
Ice Sheet ◽  
Climate Forcing ◽  
Ice Shelf ◽  
Antarctic Ice Sheet ◽  
Ice Shelves ◽  
Basal Sliding ◽  
The Antarctic

<p>Mass loss of the Antarctic ice sheet contributes the largest uncertainty of future sea-level rise projections. Ice-sheet model predictions are limited by uncertainties in climate forcing and poor understanding of processes such as ice viscosity. The Antarctic BUttressing Model Intercomparison Project (ABUMIP) has investigated the 'end-member' scenario, i.e., a total and sustained removal of buttressing from all Antarctic ice shelves, which can be regarded as the upper-bound physical possible, but implausible contribution of sea-level rise due to ice-shelf loss. In this study, we add successive layers of ‘realism’ to the ABUMIP scenario by considering sustained regional ice-shelf collapse and by introducing ice-shelf regrowth after collapse with the inclusion of ice-sheet and ice-shelf damage (Sun et al., 2017). Ice shelf regrowth has the ability to stabilize grounding lines, while ice shelf damage may reinforce ice loss. In combination with uncertainties from basal sliding and ice rheology, a more realistic physical upperbound to ice loss is sought. Results are compared in the light of other proposed mechanisms, such as MICI due to ice cliff collapse.</p>

scholarly journals An improved bathymetry compilation for the Bellingshausen Sea, Antarctica, to inform ice-sheet and ocean models

2010 ◽  
Vol 4 (4) ◽  
pp. 2079-2101 ◽  
Author(s):  
A. G. C. Graham ◽  
F. O. Nitsche ◽  
R. D. Larter
Keyword(s):  
Ocean Circulation ◽  
Ice Sheet ◽  
West Antarctica ◽  
Ice Shelf ◽  
Ice Streams ◽  
Ice Shelves ◽  
Sea Floor ◽  
Bellingshausen Sea ◽  
Warm Deep Water ◽  
Basal Melting

Abstract. The southern Bellingshausen Sea (SBS) is a rapidly-changing part of West Antarctica, where oceanic and atmospheric warming has led to the recent basal melting and break-up of the Wilkins ice shelf, the dynamic thinning of fringing glaciers, and sea-ice reduction. Accurate sea-floor morphology is vital for understanding the continued effects of each process upon changes within Antarctica's ice sheets. Here we present a new bathymetric grid for the SBS compiled from shipborne echo-sounder, spot-sounding and sub-ice measurements. The 1-km grid is the most detailed compilation for the SBS to-date, revealing large cross-shelf troughs, shallow banks, and deep inner-shelf basins that continue inland of coastal ice shelves. The troughs now serve as pathways which allow warm deep water to access the ice fronts in the SBS. Our dataset highlights areas still lacking bathymetric constraint, as well as regions for further investigation, including the likely routes of palaeo-ice streams. The new compilation is a major improvement upon previous grids and will be a key dataset for incorporating into simulations of ocean circulation, ice-sheet change and history. It will also serve forecasts of ice stability and future sea-level contributions from ice loss in West Antarctica, required for the next IPCC assessment report in 2013.

Simulating detailed spatial patterns of ice shelf basal melt

2021 ◽  
Author(s):  
Erwin Lambert ◽  
André Jüling ◽  
Paul Holland ◽  
Roderik van de Wal
Keyword(s):  
Flow Direction ◽  
Ice Sheet ◽  
Realistic Model ◽  
Western Boundary ◽  
Layer Model ◽  
Ice Shelf ◽  
Amundsen Sea ◽  
Ice Shelves ◽  
Grounding Line ◽  
Ocean Properties

<p>The contact between ice shelves and relatively warm ocean waters causes basal melt, ice shelf thinning, and ultimately ice sheet mass loss. This basal melt, and its dependence on ocean properties, is poorly understood due to an overall lack of direct observations and a difficulty in explicit simulation of the circulation in sub-shelf cavities. In this study, we compare a number of parameterisations and models of increasing complexity, up to a 2D ‘Layer’ model. Each model is aimed at quantifying basal melt rates as a function of offshore temperature and salinity. We test these models in an idealised setting (ISOMIP+) and in a realistic setting for the Amundsen Sea Embayment. All models show a comparable non-linear sensitivity of ice-shelf average basal melt to ocean warming, indicating a positive feedback between melt and circulation. However, the Layer model is the only one which explicitly resolves the flow direction of the buoyant melt plumes, which is primarily governed by rotation and by the basal topography of the ice shelves. At 500m resolution, this model simulates locally enhanced basal melt near the grounding line, in topographical channels, and near the western boundary. The simulated melt patterns for the Amundsen Sea ice shelves are compared to satellite observations of ice shelf thinning and to 3D numerical simulations of the sub-shelf cavity circulation. As detailed melt rates near the grounding line are essential for the stability of ice sheets, spatially realistic melt rates are crucial for future projections of ice sheet dynamics. We conclude that the Layer model can function as a relatively cheap yet realistic model to downscale 3D ocean simulations of ocean properties to sub-kilometer scale basal melt fields to provide detailed forcing fields to ice sheet models.</p>

The Southern Ocean and its interaction with the Antarctic Ice Sheet

Science ◽  
2020 ◽  
Vol 367 (6484) ◽  
pp. 1326-1330
Author(s):  
David M. Holland ◽  
Keith W. Nicholls ◽  
Aurora Basinski
Keyword(s):  
Southern Ocean ◽  
Ocean Circulation ◽  
Thermal Structure ◽  
Ice Sheet ◽  
Major Influence ◽  
Antarctic Ice Sheet ◽  
Ice Shelves ◽  
Air Temperatures ◽  
The Antarctic ◽  
Circulation Changes

The Southern Ocean exerts a major influence on the mass balance of the Antarctic Ice Sheet, either indirectly, by its influence on air temperatures and winds, or directly, mostly through its effects on ice shelves. How much melting the ocean causes depends on the temperature of the water, which in turn is controlled by the combination of the thermal structure of the surrounding ocean and local ocean circulation, which in turn is determined largely by winds and bathymetry. As climate warms and atmospheric circulation changes, there will be follow-on changes in the ocean circulation and temperature. These consequences will affect the pace of mass loss of the Antarctic Ice Sheet.

Sign in / Sign up

Export Citation Format

Share Document