COMPARATIVE EFFICIENCY OF GAS TURBINE MINI COMBINED HEAT AND POWER-PLANT IN CYBER-PHYSICAL POWER SUPPLY SYSTEMS

Author(s):  
M.J. Livsits ◽  
L.P. Sheludko ◽  
E.A. Larin
2020 ◽  
Vol 178 ◽  
pp. 01010
Author(s):  
Yu. V. Yavorovsky ◽  
A. I. Bartenev ◽  
I. A. Sultanguzin ◽  
A Sh Alimgazin ◽  
S. A. Prishchepova ◽  
...  

In the present paper the scheme for increasing the energy efficiency of combined heat and power plants (CHPP) using absorption heat transformers (AHT) is considered. The aim of the study is to increase the energy and environmental efficiency of natural gas use in power supply systems by application steam turbine plants and absorption heat transformers. The simulation of CHPP modernization and a harmful emissions dispersion assessment were carried out using the following software tools: ISC Manager, Thermoflex. All the calculations were made for one power unit of the CHPP in Moscow. Subsequently, the obtained data on energy efficiency increase and harmful emissions reduction were multiplied on the whole power system of Moscow, the main source of heat and electricity of which are the CHPP’s of PJSC “Mosenergo”.


Energy ◽  
2012 ◽  
Vol 45 (1) ◽  
pp. 125-133 ◽  
Author(s):  
Tadeusz Chmielniak ◽  
Sebastian Lepszy ◽  
Katarzyna Wójcik

2019 ◽  
Vol 141 (05) ◽  
pp. 46-48
Author(s):  
Lee S. Langston

An updated report is given on the University of Connecticut’s gas turbine combined heat and power plant, now in operation for 13 years after its start in 2006. It has supplied the Storrs Campus with all of its electricity, heating and cooling needs, using three gas turbines that are the heart of the CHP plant. In addition to saving more than $180 million over its projected 40 year life, the CHP plant provides educational benefits for the University.


2020 ◽  
Vol 91 (11) ◽  
pp. 673-680
Author(s):  
A. B. Petrochenkov ◽  
A. V. Romodin ◽  
D. Yu. Leizgold ◽  
A. S. Semenov

2019 ◽  
Vol 4 (4) ◽  
pp. 17-23
Author(s):  
Barikuura Gbonee ◽  
Barinyima Nkoi ◽  
John Sodiki

This research presents the performance assessment of a combined heat and power plant operating in the Niger Delta region of Nigeria. The main focus is to evaluate the performance parameters of the gas turbine unit and the waste heat recovery generator section of the combined-heat-and-power plant. Data were gathered from the manufacturer’s manual, field and panel operator’s log sheets and the human machine interface (HMI) monitoring screen. The standard thermodynamic equations were used to determine the appropriate parameters of the various components of the gas turbine power plant as well as that of the heat exchangers of the heat recovery steam generator (HRSG). The outcome of all analysis indicated that for every 10C rise in ambient temperature of the compressor air intake there is an average of 0.146MW drop in the gas turbine power output, a fall of about 0.176% in the thermal efficiency of the plant, a decrease of about 2.46% in the combined-cycle thermal efficiency and an increase of about 0.0323 Kg/Kwh in specific fuel consumption of the plant. In evaluating the performance of the Waste Heat Boiler (WHB), the principle of heat balance above pinch was applied to a single steam pressure HRSG exhaust gas/steam temperature profile versus exhaust heat flow. Hence, the evaporative capacity (steam flow) of the HRSG was computed from the total heat transfer in the super-heaters and evaporator tubes using heat balance above pinch. The analysis revealed that the equivalent evaporation, evaporative capacity (steam flow) and the HRSG thermal efficiency depends on the heat exchanger’s heat load and its effective maintenance.


Author(s):  
John Baker ◽  
Marshall Ralph

When muscular market forces and juicy resource opportunities fall into alignment, the usual pace of power plant capital development can give way to a literal sprint. The 2010 development by Mercator Minerals of a new 45 MW gas turbine power plant at the Mineral Park Mine in Arizona is an example of the respectable speed at which an LM6000 PF Sprint plant can be bought, fueled, built and fired up. In this case, a grand market opportunity dropped into the in-basket of a mine CEO prepared to pounce: Mercator Minerals got the opportunity to sell, in a short delivery window, a great amount of copper/molybdenum ore concentrate. The opportunity was blocked by a shortage of electricity needed to mine it and concentrate the ore. A long-planned 220kV transmission line could not be permitted and built in time. Mercator recognized that a gas pipeline could be built, however, and was within the capabilities of Mercator’s construction resources. Solution: a gas-fired mine-site power plant. On Christmas Eve, 2009, Mercator summoned its power supply consultant to the mine. Power plant engineers earn part of their keep by inserting a moderating element into these spirited discussions. But when the engineers met with Mercator’s CEO on Christmas Eve, they found themselves pressed “vigorously” on the spot for a review of plant and equipment options, and an AFE-level cost of electricity estimate. The mad pace continued: the final consultant report, and Mercator’s command to proceed, came before New Year’s Day. After a multi-month scramble to find financing and an investigation into used, gray-market and new turbine availability, the engineers located a new LM6000 high in GE’s queue and temporarily homeless due to a schedule change. All parties agreed that EPC would be too slow. Mercator undertook to procure and build the entire project, employing the consultant as the design engineer. The plant’s completion and entry into service in 2010 was no surprise to Mercator. For others involved, the project seemed to finish before it had a chance to start. The project, now running productively, is a vivid testimony to Mercator’s ability to move decisively to develop a power plant crucial to the Mineral Park Mine’s production commitments.


Energies ◽  
2018 ◽  
Vol 11 (7) ◽  
pp. 1784 ◽  
Author(s):  
Ryszard Bartnik ◽  
Waldemar Skomudek ◽  
Zbigniew Buryn ◽  
Anna Hnydiuk-Stefan ◽  
Aleksandra Otawa

2020 ◽  
Vol 220 ◽  
pp. 01074
Author(s):  
Pavel Kolpakhchyan ◽  
Boris Lobov ◽  
Ivan Ivanov ◽  
Alfred Safin

This article considers power supply of consumers in the Far North. It is proposed to use systems which include units operating on liquefied natural gas and hydrogen. Such units have a number of advantages over the currently used diesel power plants. The main advantage is a significant reduction of emissions to air and environmental pollution. The use of gas turbine units, comprising a turbine and a highspeed generator, also allows one to reduce the weight and dimensions of the power plant. The issues of choosing the structure of the power supply system for the given operating conditions are considered: the basic requirements are formulated and a list of quality indicators of the system functioning is determined.


Sign in / Sign up

Export Citation Format

Share Document