Tensile Behavior after Oxidative Aging of Gum and Black-Filled Vulcanizates of SBR and NR

1999 ◽  
Vol 72 (4) ◽  
pp. 721-730 ◽  
Author(s):  
G. R. Hamed ◽  
J. Zhao
Keyword(s):  
Tensile Strength ◽  
Natural Rubber ◽  
Tensile Behavior ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Oxidative Aging ◽  
Prolonged Aging ◽  
Aging Period ◽  
Early Aging ◽  
Styrene Butadiene

Abstract Typical sulfur-cured vulcanizates of styrene-butadiene rubber (SBR) and natural rubber (NR) were prepared, and subjected to air-oven aging at 100 °C. Gum specimens exhibited an initial aging period in which stiffness was unchanged, while tensile strength and strain-to-break were significantly reduced. In contrast, black-filled vulcanizates stiffened during early aging. After intermediate aging times, NR specimens softened, while SBR stiffened. With prolonged aging, all compositions became hard and inextensible.

The Mechanical Properties of Modified Attapulgite Reinforced Nature Rubber and Styrene-Butadiene Rubber Nanocomposites

2010 ◽  
Vol 150-151 ◽  
pp. 762-765
Author(s):  
Ji Hu Wang ◽  
Hong Bo Liu ◽  
Shao Guo Wen ◽  
Yan Shen
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Natural Rubber ◽  
Coupling Agent ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
The Matrix ◽  
Modified Attapulgite ◽  
Rubber Nanocomposites ◽  
Styrene Butadiene

Attapulgite (AT)/natural rubber (NR)/ styrene-butadiene rubber (SBR) nanocomposites have been prepared after attapulgite was modified by different coupling agent. The treatment of AT caused the adhesion between AT nanorods and the nature rubber/styrene-butadiene rubber was improved, which enhanced the tensile properties of the matrix. The tensile strength of composites attained 15.6 MPa after AT was modified by 3%wt Si-69 coupling with addition of 20 phr.

scholarly journals EFFECT OF EPOXIDIZED NATURAL RUBBER AS A COMPATIBILIZER IN SILICA-FILLED STYRENE BUTADIENE RUBBER COMPOUND

2014 ◽  
Vol 3 (2) ◽  
pp. 1-4
Author(s):  
Indra Surya ◽  
Siswarni MZ
Keyword(s):  
Tensile Strength ◽  
Natural Rubber ◽  
Tensile Modulus ◽  
Epoxidized Natural Rubber ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Rubber Compound ◽  
Cure Rate ◽  
Styrene Butadiene ◽  
Rubber Filler

By using a semi-efficient vulcanization system, the effect of Epoxidized Natural Rubber (ENR) as a compatibilizer in silica-filled Styrene Butadiene Rubber (SBR) compound was carried out. The ENR was incorporated into the silica-filled SBR compound at 5.0 and 10.0 phr. An investigation was carried out to examine the effect of ENR on cure characteristics and tensile properties of the silica-filled SBR compound. It was found that ENR gave enhanced cure rate to the silica-filled SBR compound. ENR also exhibited a higher torque difference, tensile modulus, and tensile strength up to 10.0 phr. The study of rubber - filler interaction proved that the addition of ENR to the silica-filled SBR system improved the rubber - filler interaction.

Thermal conductivity of styrene butadiene rubber compounds with natural rubber prophylactics waste as filler

1999 ◽  
Vol 35 (9) ◽  
pp. 1687-1693 ◽  
Author(s):  
N.S. Saxena ◽  
P. Pradeep ◽  
G. Mathew ◽  
S. Thomas ◽  
M. Gustafsson ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Natural Rubber ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Rubber Compounds ◽  
Styrene Butadiene

scholarly journals Effects of alkanolamide addition on cure characteristics, crosslink density and tensile properties of carbon-black-filled styrene-butadiene rubber compounds

2018 ◽  
Vol 197 ◽  
pp. 12006 ◽  
Author(s):  
Indra Surya ◽  
Hanafi Ismail
Keyword(s):  
Tensile Strength ◽  
Carbon Black ◽  
Tensile Properties ◽  
Crosslink Density ◽  
Density Measurement ◽  
Tensile Modulus ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Cure Characteristics ◽  
Styrene Butadiene

By using a semi-efficient sulphur vulcanisation system, the effects of alkanolamide (ALK) addition on cure characteristics, crosslink density and tensile properties of carbon black (CB)-filled styrene-butadiene rubber (SBR) compounds were investigated. The ALK was prepared from Refined Bleached Deodorized Palm Stearin and diethanolamine and added into the CB-filled SBR compounds. The ALK loadings were 1.0, 3.0, 5.0 and 7.0 phr. It was found that ALK decreased the scorch and cure times of the CB-filled SBR compounds. ALK also improved the tensile modulus and tensile strength; especially up to a 5.0 phr of loading. The crosslink density measurement proved that the 5.0 phr of ALK exhibited the highest degree of crosslink density which caused the highest in tensile modulus and tensile strength. Due to its plasticity effect, ALK increased the elongation at break of the CB-filled SBR vulcanisates.

Gas products generation mechanism during co-pyrolysis of styrene-butadiene rubber and natural rubber

2021 ◽  
Vol 401 ◽  
pp. 123302
Author(s):  
Qirong Yang ◽  
Shuangpeng Yu ◽  
Haowen Zhong ◽  
Ting Liu ◽  
Erren Yao ◽  
...  
Keyword(s):  
Natural Rubber ◽  
Generation Mechanism ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Gas Products ◽  
Styrene Butadiene

An investigation on the failure envelopes of carbon black-filled natural rubber and styrene-butadiene rubber vulcanizates

1990 ◽  
Vol 9 (12) ◽  
pp. 1379-1382 ◽  
Author(s):  
Chanchal Neogi ◽  
S. P. Basu ◽  
Anil K. Bhowmick
Keyword(s):  
Carbon Black ◽  
Natural Rubber ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Failure Envelopes ◽  
Styrene Butadiene
Sign in / Sign up

Export Citation Format

Share Document