Effect of Pre-Slaughter Practises and Early Post-Mortem Interventions on Sheep Meat Tenderness and Its Impact on Microbial Status

Tenderness, together with flavour, is the main quality trait that defines consumer acceptance of sheep meat. The factors affecting tenderness can be grouped as those influenced before slaughter, in the early post-mortem intervention and, finally, during the aging period. These factors have been extensively studied with respect to tenderness, but the impact of early post-mortem interventions and subsequent aging on the microbial quality of the final products has not been broadly reviewed to date. In this review, the authors summarize the most recent knowledge on lamb meat tenderness management and how such practices may impact the final meat quality, especially its microbial status. The impacts of pre-slaughter factors (age, sex, diet, genotype and transport) and post-mortem interventions (chilling regime, electrical stimulation, or hanging method), are described and comprehensively discussed.

Main Controlling Factors and Empirical Models for Total Mercury and Methylmercury Accumulation in Rice (Oryza Sativa L.)

It has been reported that rice consumption is the main mercury (Hg) exposure pathway for humans, and soil properties could significantly affect the methylation and accumulation process of Hg in soil-rice system. In this study, 19 paddy soil with various properties were spiked with exogenous Hg(II) at three concentration levels to conduct a pot experiment after a 60-days aging period. Stepwise multiple linear regression was applied to determine the controlling soil factors and develop prediction models for the methylmercury (MeHg) concentration in soil and total Hg (THg) and MeHg in brown rice. The results showed that THg in brown rice was positively correlated with THg in soil, while it had a negative correlation with soil pH and clay content. Soil organic matter (OM) promoted Hg methylation and inhibited the accumulation of MeHg in brown rice. Soil pH and clay content were negative factors when soil MeHg was used to predict MeHg in brown rice. THg and MeHg in brown rice could be well predicted by soil THg, pH and clay content. These results may provide a theoretical basis for safe production of rice in Hg contaminated paddy field.

Characterization and Evolution of Volatile Compounds of Cabernet Sauvignon Wines from Two Different Clones during Oak Barrel Aging

Xinjiang is a major wine-making region in China, but its hot climate in summer and intense sun exposure negatively affect the aroma quality of Cabernet Sauvignon wine. The aim of this study was to characterize and differentiate the volatile composition of Cabernet Sauvignon wines from two clones (169 and 191) in Xinjiang, and to study their aromatic profile evolution during 12-month oak barrel aging period. Results showed that before aging, clone 169 wine contained higher concentrations of several alcohols and ethyl esters, while acetate esters and furanic compounds were higher in clone 191 wine. After aging, levels of many terpenes, norisoprenoids, volatile phenols and phenolic aldehydes were significantly higher in clone 169 wine than 191 wine. Aroma series analysis revealed that clone 169 wine exhibited higher floral and roasty aromas after aging, while clone 191 wine had stronger chemical aroma. Principal component analysis indicated that aging process played a primary role in the alteration of volatile profile in these wines. Clone played a secondary role and oak barrel had a tertiary contribution to the variation. The present work indicates that clone 169 is a better choice for producing high-quality aged Cabernet Sauvignon wine with intense and elegant aroma in Xinjiang.

Effects of beef carcass size, and subsequent aging time, on yield and color characteristics of top round steaks

Variation in cut size and weight of fabricated subprimals is a challengeof increased beef carcass weights. Subsequently, variation in carcass size hasresulted in consistency challenges during retail display. Theobjective of this study was to assess the retail shelf-life of commerciallyavailable top rounds from varying carcass weights. In the current study, 21industry average weight (AW, 340-409 kg; no industry discount) beef carcassesand 21 oversized (OS, exceeding 454 kg; receive a discount) beef carcasses wereevaluated. Carcasses were selected at a commercial beef packing plant, wherethe left and right (paired) top round subprimals of each carcass were procured.Paired top rounds were assigned to a short (8d), average (23d), or extended(42d) postmortem aging period. After wet-aging, subprimals were fabricated intosteaks for additional analysis. Steaks were evaluated as whole top round steaksor further fabricated into “superficial” and “deep” portions at 5.08 cm fromthe superficial edge of the Semimembranosus and the Adductor muscle.Top rounds and steaks from OS carcasses were larger (P < 0.01) thanthose from AW carcasses. Quantitative color of the anatomically deep locationsof the OS steaks had the greatest mean L* (lightness; P < 0.01), a*(redness; P < 0.01) and b* (yellowness; P < 0.01) values. Extendingthe aging timeline increased L* (lightness; P < 0.01), decreased a*(redness; P < 0.01), and decreased b* (yellowness; P <0.01). Alternative top round steak fabrication which separates the deep andsuperficial anatomical locations could be an effective means of providing moreuniform steaks. 

Housekeeping Proteins in Meat Quality Research: Are They Reliable Markers for Internal Controls in Western Blot? - A Mini Review

Advancements in technology and analytical methods enable researchers to explore the biochemical events that cause variation in meat quality. Among those, western blot techniques have been successfully used in identifying and quantifying the key proteins that have critical functions in the development of meat quality. Housekeeping proteins, like β-Actin, glyceraldehyde 3-phosphate dehydrogenase (GAPDH), and tubulins are often used as internal controls in western blots to normalize the abundance of the protein of interest. However, there are increasing concerns about using housekeeping proteins for western blot normalization, as these proteins do not demonstrate any loading differences above the relatively small total protein loading amounts of 10 μg. In addition, the interaction between these housekeeping proteins and the programmed cell death processes highlights the concerns about using the housekeeping protein as the internal control in meat quality research. Moreover, recent proteomic research has indicated that the abundance of some housekeeping proteins, like β-actin, GAPDH, and tubulin, can be altered by preslaughter stress, dietary supplementation, gender, slaughter method, genotype, breed, aging period, muscle type, and muscle portion. Furthermore, these housekeeping proteins could have differential expression in meat with differing color stability, tenderness, and water holding capacity. Therefore, this review aims to examine the realities of using housekeeping proteins as the loading control in meat quality research and introduce some alternative methods that can be used for western blot normalization.  

Sustained Effects of Muscle Calpain System Genotypes on Tenderness Phenotypes of South African Beef Bulls during Ageing up to 20 Days

The most important factor that determines beef tenderness is its proteolytic activity and the balance between calpain1 protease activity and calpastatin inhibition is especially important, while contributions could arise from calpain2 and possibly calpain3. These processes are however affected by the meat aging process itself. To determine whether genotypes in the calpaincalpastatin system can enhance tenderness throughout a 20 day aging period, South African purebred beef bulls (n=166) were genotyped using the Illumina BovineHD SNP BeadChip, through genebased association analysis targeting the cast, capn3, capn2 and capn1 genes. The WarnerBratzler shear force (WBSF) and myofibril fragment length (MFL) of Longissimus thoracis et lumborum (LTL) steaks were evaluated between d 3 d 20 of aging, with protease enzyme activity in the first 20 h postmortem. Although several of the 134 SNP associated with tenderness, only seven SNP in the cast, capn2 and capn1 genes sustained genetic associations, additive to agingassociated increases in tenderness for at least three of the four aging periods. While most genomic associations were relatively stable over time, some genotypes within SNP responded differently to aging, resulting in altered genomic effects over time. The level of aging at which genomic associations are performed is an important factor that determines whether SNP affect tenderness phenotypes.

Evaluation of Dimensional Changes According to Aging Period and Postcuring Time of 3D-Printed Denture Base Prostheses: An In Vitro Study

During the three-dimensional (3D) printing process of a dental prosthesis, using photopolymer resin, partially polymerized resin is further cured through the postcuring process that proceeds after the printing, which improves the stability of the printed product. The mechanical properties of the end product are known to be poor if the postcuring time is insufficient. Therefore, this study evaluated the effect of the postcuring time of the 3D-printed denture base on its dimensional stability, according to the aging period. The 3D prints were processed after designing maxillary and mandibular denture bases, and after the following postcuring times were applied: no postcuring, and 5, 15, 30, and 60 min. The dimensional stability change of the denture base was evaluated and analyzed for 28 days after the postcuring process. The trueness analysis indicated that the mandibular denture base had lower output accuracy than the maxillary denture base, and the dimensional stability change increased as postcuring progressed. In the no postcuring group for the mandible, the error value was 201.1 ± 5.5 µm (mean ± standard deviation) after 28 days, whereas it was 125.7 ± 13.0 µm in the 60 min postcuring group. For both the maxilla and the mandible, shorter postcuring times induced larger dimensional stability changes during the aging process. These findings indicate that in order to manufacture a denture base with dimensional stability, a sufficient postcuring process is required during the processing stage.

Profile of Producers and Production of Dry-Aged Beef in Brazil

No information is currently available on the profile of producers and production process of dry-aged beef in Brazil, to the best of the authors’ knowledge. We surveyed 37 Brazilian companies that were producing dry-aged beef in 2020 to investigate this market. The absolute and relative frequency of responses was calculated to obtain the sum, average, minimum, and maximum values. From the respondents, dry-aged beef was first produced in 2009, and most producers are located in big cities. Most respondents control and monitor chamber temperature; however, humidity and air velocity only are monitored. The aging period (mostly between 22 to 60 days) was the main indicator of product readiness. The process losses (water loss and crust trimming) can reach 65%. Some producers perform microbiological analyses to ensure product safety and others use tools such as GMP and SOP. The results of this survey may help governmental institutions to develop a standardized industrial protocol for producing dry-aged beef in Brazil.

Study of the Effect of Physical Aging on the Polylactic Acid by Thermal and Optical Techniques

In this work, we investigated the influence of physical aging on polylactic acid (PLA) films using thermal and optical techniques; Differential Scanning Calorimetry (DSC), Thermally Stimulated Depolarization Current (TSDC), and Attenuated Total Reflection Spectroscopy (ATR). The PLA films were aged for different periods: 60, 90, and 120 minutes at a temperature Ta = 43 °C. The result obtained by DSC showed that the effect of physical aging appeared as an endothermic peak, which increased with increasing aging time and evolved towards higher temperatures. TSDC results showed a thermal current peak located between 30 and 80 ° C, which represented the main relaxation mode (α relaxation) of the dielectric manifestation of the glass transition. The intensity of this peak decreased and was shifted to higher temperatures when aging time increased, this result can be explained by a decrease in the molecular mobility of macromolecular chains due to the decrease in the free volume. The effect of physical aging on the PLA by the ATR technique showed a gradual decrease in all absorption bands during the aging period. In particular, the wide absorption band between 3000 and 3700 cm-1 attributed to the hydroxyl group (OH), which disappeared after two hours of aging