Method of Validation for Residual Solvents in Bisoprolol Fumarate by GC Technique

2021 ◽  
pp. 147-155
Author(s):  
Sandip A Telavane ◽  
Seema Kothari ◽  
Manohar V. Lokhande
Keyword(s):  
Limit Of Detection ◽  
Chromatographic Technique ◽  
Range Limit ◽  
Column Temperature ◽  
Residual Solvent ◽  
Residual Solvents ◽  
Validation Parameters ◽  
Limit Of Quantitation ◽  
Chromatographic Condition ◽  
Methylene Dichloride

Validation is important technique for detection, progress and estimation of drugs for pharmaceutical analysis. Aim of this article was to check the progress and validation of the method employed for the Residual Solvents in Bisoprolol Fumarate by Gas Chromatographic technique. The objective of this protocol is to validate a GC method of analysis for detection and Quantification of Residual Solvents Methanol, Acetone and Methylene dichloride in Bisoprolol Fumarate. In the pharmaceutical industry, validation policy is more important for documented of validation, types of validation and validation policy. The method was developed accurately and validation parameters are explained. Chromatographic condition was GC- 2014, gas chromatograph equipped with FID detector, column: 30 m x 0.32 mm ID x 1.8 µm DB - 624 capillary column or equivalent and column temperature was 45°C (hold 7 minutes) to 250°C @ 40°C/minutes, hold at 250°C for 3 minutes. The parameters such as Accuracy, Specificity, Precision, Linearity and Range, Limit of detection (LOD), Limit of quantitation (LOQ), ruggedness, robustness and system suitability testing with residual solvent such as Methanol, Acetone and methylene dichloride. All validation parameters are used in the routine and stability analysis.

scholarly journals Response Surface Method Aided Development and Validation of Stability Indicating RP-HPLC-UV Method for Impurities of Dextromethorphan Hydrobromide in API and Three Marketed Formulations

2021 ◽  
Vol 33 (11) ◽  
pp. 2737-2745
Author(s):  
Md Irshad Alam ◽  
Aquil-Ur-Rahim Siddiqui
Keyword(s):  
Flow Rate ◽  
Related Compound ◽  
High Performance ◽  
Limit Of Detection ◽  
Forced Degradation ◽  
Column Temperature ◽  
Stress Study ◽  
Validation Parameters ◽  
Limit Of Quantitation ◽  
Dextromethorphan Hydrobromide

An innovative, specific, economical and precise method was developed and validated by employing reverse phase high performance liquid chromatography (HPLC) for contemporaneous estimation of dextromethorphan hydrobromide (DHB) along with its impurities in liquid formulation with forced degradation studies and confirmation of content of DHB in composition label in three market formulations along with their impurities were detected by this method. The optimized chromatographic conditions comprised of column (25 cm × 0.46 cm) × 5 μm Kromasil C8 bearing flow rate of 1.5 mL/min and wavelength 220 nm for UV-estimation. Design of experiments were implemented by following Box Behnken design with most optimum parameters selected as follows, column temperature (A), flow rate (B) and pH (C) with corresponding responses comprised of resolution between related compound A (RCA) and DHB (Y1), tailing of DHB (Y2) and resolution between related compound B (RCB) and DHB (Y3). Stress testing was performed and proved that method was stable as no interfering peaks were observed. All validation parameters including suitability, linearity, accuracy, specificity, limit of detection, limit of quantitation, ruggedness, robustness and stress study were evaluated as per updated ICH guidelines and found to be within limit for pure DHB and detected impurities.

Development and Validation of Head-space Gas Chromatographic Method in Tandem with Flame ionized detection for the determination of Residual solvents in Simeprevir API Synthesis

2021 ◽  
pp. 5175-5181
Author(s):  
C. Hazarathaiah Yadav ◽  
A. Malli Babu
Keyword(s):  
Limit Of Detection ◽  
Intermediate Precision ◽  
Residual Solvent ◽  
Residual Solvents ◽  
Flame Ionization ◽  
Limit Of Quantitation ◽  
Reference Material Certification ◽  
Precision System ◽  
Gas Chromatographic Method ◽  
Development And Validation

Residual solvent testing is an integral part of reference material certification. A gas chromatography/flame ionization detector/headspace method has been developed and validated to detect and quantitate commonly used residual solvents in our production processes: Methanol, Tetrahydrofuran, Toluene, Dichloromethane and Dichloroethane in Simeprevir API. A simple and selective HS-GC method is described for the determination & quantification of Residual Solvents in Simeprevir API. Chromatographic separation was achieved on USP G43 equivalent capillary column Thermo Scientific™ Trace GOLD™ TG-624 SilMS, 30m × 0.32mm × 1.8µm column (P/N 26059-3390) using nitrogen as carrier gas by using different temperature gradient of FID Detectors. Linearity was observed in the range 40-120% of standard concentrations for Methanol, Tetrahydrofuran, Toluene, Dichloromethane and Dichloroethane (r2>0.999) for the amount of solvent estimated by the proposed methods was in good agreement. The proposed methods were validated. The accuracy of the methods was assessed by recovery studies at three different levels. Recovery experiments indicated the absence of interference from commonly encountered diluent and API. The method was found to be precise as indicated by the repeatability analysis, showing %RSD less than 10 for Methanol, Tetrahydrofuran, Toluene, Dichloromethane and Dichloroethane. All statistical data proves validity of the methods and can be used for routine analysis of pharmaceutical active ingredients for estimation of Residual Solvents of Methanol, Tetrahydrofuran, Toluene, Dichloromethane and Dichloroethane in Simeprevir. Baseline separation of all five solvents and Simeprevir API is achieved within 20.5 minutes of analysis time. Method validation comprised the following parameters: limit of detection (LOD), limit of quantitation (LOQ), linearity and range, accuracy, precision (repeatability and intermediate precision), system suitability, specificity, and robustness. Linearity and LOQ (ppm) are listed for each solvent in manuscript. The present method was proven to be robust and accurate for quantitative analysis of residual solvent in neat materials.

scholarly journals Method development and validation for the determination of residual solvents in quinabut API by using gas chromatography. Message 2

Pharmacia ◽  
2021 ◽  
Vol 68 (1) ◽  
pp. 53-59
Author(s):  
Оlena Golembiovska ◽  
Oleksii Voskoboinik ◽  
Galina Berest ◽  
Sergiy Kovalenko ◽  
Liliya Logoyda
Keyword(s):  
Gas Chromatography ◽  
Method Development ◽  
Limit Of Detection ◽  
Accurate Method ◽  
Chromatography Method ◽  
Synthetic Process ◽  
Residual Solvent ◽  
Residual Solvents ◽  
All Solutions ◽  
Limit Of Quantitation

Aim. The aim of study was to develop and validate a simple, precise and accurate method using gas chromatography for analysis of residual solvents – acetone and 2-propanol – in quinabut API. Materials and methods. All experiments were performed on a gas chromatographic system equipped with FID detector (Shimadzu GC System) using the DB-624 (30 m × 0.32 mm ID, 3.0 μm film sickness) column as stationary phase. Nitrogen was used as carrier gas with flow rate 7.5 mL/ min. Split ratio was 1:5, injector temperature was 140 °C, detector temperature was 250 °C, oven temperature was programmed from 40 °C (2 min) to 50 °C at 1 °C/min and then increased at a rate of 15 °C/min up to 215 °C; and maintained for 2 min. All solutions were prepared using water as diluent. Results. This proposed method is assessed for separation of residual solvent from quinabut with quantification. The obtained results are compared with the corresponding specified limits of ICH standard guidelines. The method validation was done by evaluating specificity, limit of detection (LOD) and limit of quantitation (LOQ), linearity, accuracy, repeatability, ruggedness, system suitability and method precision of residual solvents as indicated in the ICH harmonized tripartite guideline. The separation between acetone and 2-propanol peaks is 2.07. Hence method was found to be specific. The linear relationship evaluated across range of 15 to 180% for acetone and 2-propanol of ICH specified limit of residual solvents. The graphs of theoretical concentration versus obtained concentration are linear and the regression coefficients ‘R’ for residual solvents were more than 0.9968. The values of LOD and LOQ were much less than the lower limit of the concentration range and cannot affect the accuracy of the test. The technique was characterized by high intra-laboratory accuracy at concentrations close to the nominal acetone and 2-propanol concentration. All solutions were stable in water for at least 1 hour when stored at room temperature. Conclusion. A simple, specific, accurate, precise and rugged gas chromatography method was developed and validated for the quantification of residual solvents present in quinabut API through an understanding of the synthetic process, nature of solvents and nature of stationary phases of columns. The residual solvents acetone and 2-propanol were determined.

Fast Method for the Determination of Residual Solvents in Radiopharmaceutical Products

2017 ◽  
Vol 68 (4) ◽  
pp. 666-670 ◽  
Author(s):  
Mirela Mihon ◽  
Catalin Stelian Tuta ◽  
Alina Catrinel Ion ◽  
Dana Niculae ◽  
Vasile Lavric
Keyword(s):  
Gas Chromatography ◽  
Control Method ◽  
Limit Of Detection ◽  
The Body ◽  
Biologically Active ◽  
Injection Technique ◽  
Fast Method ◽  
Residual Solvent ◽  
Residual Solvents

The aim of this work was the development and validation of a fast analytical method to determine the residual solvents content in radiopharmaceuticals such as: 18F-Fluorodeoxyglucose (18F-FDG), 18F-Fluoroestradiol (18F-FES), 18F-Fluorothymidine (18F-FLT),18F-Fluoromisonidazole (18F-FMISO). Radiopharmaceuticals are radioactive preparations for medical purposes used in nuclear medicine as tracers in diagnostic imaging and treatment of certain diseases. Positron Emission Tomography (PET) is a medical imaging technique that consists in introducing into the body of a small amount of a biologically active chemical compound labelled with a short lived positron-emitting radioisotope (18F, 11C, 68Ga). Residual solvents are critical impurities in radiopharmaceuticals that can affect labelling, stability and physicochemical properties of drugs. Therefore, the determination of these solvents is essential for quality control of radiopharmaceuticals. Validation of the control method for residual solvents by gas chromatography is referred by the European Pharmacopoeia using a special injection technique (head space). The parameters of the method, which comply with International Conference on Harmonization guidelines, are: accuracy, precision, linearity, limit of detection, limit of quantification and robustness. The proposed method (direct gas chromatography injection) proved to be linear, precise, accurate and robust. Good linearity was achieved for all the solvents and correlation coefficients (R2) for each residual solvent were found more than 0.99.

Rapid and Sensitive Liquid Chromatographic Method for Determination of Anastrozole in Different Polymer–Lipid Hybrid Nanoparticles

2021 ◽  
pp. 247263032098230
Author(s):  
Dilshad Ahmad ◽  
Faisal A. Al Meshaiti ◽  
Yazeed K. Al Anazi ◽  
Osama Al Owassil ◽  
Alaa Eldeen B. Yassin
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
Reversed Phase ◽  
Hplc Method ◽  
Hybrid Nanoparticles ◽  
Array Detector ◽  
Relative Standard ◽  
Validation Parameters ◽  
Limit Of Quantitation ◽  
Inhibitor Drug

Anastrozole, an aromatase inhibitor drug, is used for the treatment of breast cancer in pre- and postmenopausal women. Anastrozole’s incorporation into nanoparticulate carriers would enhance its therapeutic performance. To perceive the exact loaded amount of drug in nanocarriers, a valid analytical method is required. The reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed and validated by using the C18 column, 150 × 4.6 mm, 5 µm particle size, in isocratic mobile phase composed of 50:50 V/V (volume/volume) acetonitrile–phosphate buffer (pH 3) flowing at a rate of 1.0 mL/min, and a diode array detector (DAD) set at λmax = 215 nm. The validation parameters such as linearity, accuracy, specificity, precision, and robustness have proven the accuracy of the method, with the relative standard deviation percentage (% RSD) values < 2. The limit of detection of the method was found equal to 0.0150 µg/mL, and the limit of quantitation was 0.0607 µg/mL. The percent recovery of sample was in the range of 98.04–99.25%. The method has the advantage of being rapid with a drug retention time of 2.767 min, specific in terms of resolution of peaks void of interference with any of the excipients, and high reproducibility. This makes it highly applicable for quality control purposes.

scholarly journals DEVELOPMENT AND VALIDATION OF A UV SPECTROPHOTOMETRIC METHOD FOR DETERMINATION OF AGOMELATINE IN BULK AND A TABLET DOSAGE FORM

2021 ◽  
Vol 10 (1) ◽  
pp. 22-25
Author(s):  
Firake Bhushan M. ◽  
Pathak Pranjalee V. ◽  
Dorik Pallavi K. ◽  
Siddaiah M.
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Linear Regression Analysis ◽  
Spectroscopic Method ◽  
Uv Spectrophotometry ◽  
Analytical Method Validation ◽  
Analytical Technique ◽  
International Conference ◽  
Validation Parameters ◽  
Limit Of Quantitation

UV spectrophotometry is an analytical technique used routinely for qualitative and quantitative assay due the low cost and reliability during analysis. An simple, efficient, rapid, sensitive, precise and economical UV Spectrophotometric method has been developed for estimation of agomelatine from bulk and pharmaceutical formulation. The method was developed and validated according to International Conference on Harmonization (ICH Q2 R1) guidelines.  The λmax of agomelatine in acetonitrile was found to be 229.6 nm. The analytical method validation parameters linearity, precision, accuracy, robustness were studied according to International Conference on Harmonization guidelines. Pure drug concentration was prepared in the range of 1-10 μg/ml and the linear regression analysis data showed good linear relationship with correlation coefficient value 0.9937. The precision of the method was studied as an intra- day, inter-day variations with value less than 2 % RSD. The limit of detection and limit of quantitation were found to be 0.577 and 1.248 μg/ml, respectively. Recoveries were found to be in the range of 100.815 to 101.744 % and % RSD was less than 2 %. This proposed UV spectroscopic method is simple and suitable for routine analysis. Keywords: Keywords: Agomelatine, Validation, UV Spectrophotometric method

scholarly journals Spectrophotometric Determination of Olmutinib in Bulk by Area under Curve and First Order Derivative Methods and its Validation as per ICH guidelines

2019 ◽  
Vol 9 (4-A) ◽  
pp. 349-354
Author(s):  
BALU KHANDARE ◽  
Atish C. Musle ◽  
Sanket S. Arole ◽  
Pravin V. Popalghat
Keyword(s):  
Area Under Curve ◽  
Limit Of Detection ◽  
Order Derivative ◽  
Spectrometric Method ◽  
First Order ◽  
Accuracy And Precision ◽  
Ich Guidelines ◽  
Validation Parameters ◽  
Limit Of Quantitation

Abstract: A simple, precise and economical UV-spectrophotometric method has been developed for the estimation of Olmutinib from bulk. Two methods were developed First method (A) applied was area under curve (AUC) in which the area was integrated in wavelength from 262-272nm. Second method (B) was first order derivative spectrometric method. In this method absorbance at λmin=256.57nm, λmax=282.83nm and zero cross=267.68nm was measured. Calibration curves were plotted for the method by using instrumental response at selected wavelength and concentration of analyte in the solution. In both the methods, linearity was observed in the concentration range of 2-12µg/ml at the λmax=267.68nm. Accuracy and precision studies were carried out and results were satisfactorily obtained. The drug at each of the 80 %, 100 % and 120 % levels showed good recoveries that is in the range of 98.00 to 99.00% for both methods, hence it could be said that the method was accurate. Limit of detection (LOD) and limit of quantitation (LOQ) were determined for the method. The method was validated as per International Conference on Harmonization. All validation parameters were within the acceptable limit. The developed method was successfully applied to estimate the amount of Olmutinib in pharmaceutical formulation.

scholarly journals A Fast and Validated HPLC Method for Simultaneous Determination of Dopamine, Dobutamine, Phentolamine, Furosemide, and Aminophylline in Infusion Samples and Injection Formulations

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Fuchao Chen ◽  
Baoxia Fang ◽  
Sicen Wang
Keyword(s):  
Mobile Phase ◽  
Dosage Form ◽  
Limit Of Detection ◽  
Hplc Method ◽  
Stability Study ◽  
Precision Data ◽  
Column Temperature ◽  
Ich Guidelines ◽  
Limit Of Quantitation ◽  
The Stability

A simple, fast, and validated HPLC method was developed for the simultaneous quantization of five cardiovascular agents: dopamine (DPM), dobutamine (DBM), phentolamine (PTM), furosemide (FSM), and aminophylline (APL) either in infusion samples or in an injection dosage form. The proposed method was achieved with a 150 mm × 4.6 mm, 5.0 μm C18 column, by using a simple linear gradient. Mobile phase A was buffer (50 mM KH2PO4) and mobile Phase B was acetonitrile at a flow rate of 1.0 mL/min. The column temperature was kept at 30°C, and the injection volume was 20 μL. All analytes were separated simultaneously at a retention time (tr) of 3.93, 5.84, 7.06, 8.76, and 9.67 min for DPM, DBM, PTM, FSM, and APL, respectively, with a total run time of less than 15.0 min. The proposed method was validated according to ICH guidelines with respect to accuracy, precision, linearity, limit of detection, limit of quantitation, and robustness. Linearity was obtained over a concentration range of 12.0–240.0, 12.0–240.0, 20.0–200.0, 6.0–240.0, and 10.0–200.0 μg/mL DPM, DBM, PTM, FSM, and APL, respectively. Interday and intraday accuracy and precision data were recorded in the acceptable limits. The new method has successfully been applied for quantification of all five drugs in their injection dosage form, infusion samples, and for evaluation of the stability of investigated drugs in mixtures for endovenous use. The results of the stability study showed that mixtures of DPM, DBM, PTM, FSM, and APL in 5% glucose or 0.9% sodium chloride injection were stable for 48 hours when stored in polypropylene syringes at 25°C.

scholarly journals Determination of Tianeptine in Tablets by High-Performance Liquid Chromatography with Fluorescence Detection

2007 ◽  
Vol 90 (3) ◽  
pp. 720-724
Author(s):  
Sevgi Tatar Ulu
Keyword(s):  
Lower Limit ◽  
High Performance ◽  
Limit Of Detection ◽  
Internal Standard ◽  
Linear Calibration ◽  
Fluorescence Detector ◽  
Relative Standard ◽  
Validation Parameters ◽  
Limit Of Quantitation

Abstract A sensitive and selective high-performance liquid chromatographic method has been developed for the determination of tianeptine (Tia) in tablets. The method is based on derivatization of Tia with 4-chloro-7-nitrobenzofurazan (NBD-Cl). A mobile phase consisting of acetonitrile10 mM orthophosphoric acid (pH 2.5; 77 + 23) was used at a flow rate of 1 mL/min on a C18 column. The Tia-NBD derivative was monitored using a fluorescence detector, with emission set at 520 nm and excitation at 458 nm. Gabapentin was selected as an internal standard. Linear calibration graphs were obtained in the concentration range of 45300 ng/mL. The lower limit of detection (LOD) was 10 ng/mL at a signal-to-noise ratio of 4. The lower limit of quantitation (LOQ) was 45 ng/mL. The relative standard values for intra- and interday precision were &lt;0.46 and &lt;0.57%, respectively. The recovery of the drug samples ranged between 98.89 and 99.85%. No chromatographic interference from the tablet excipients was found. The proposed method was validated in terms of precision, robustness, recovery, LOD, and LOQ. All the validation parameters were within the acceptance range. The proposed method was applied for the determination of Tia in commercially available tablets. The results were compared with those obtained by an ultraviolet spectrophotometric method using t- and F-tests.

scholarly journals THE RAPID AND GREEN HAIR ANALYSIS METHOD DEVELOPMENT USING FTIR FOR PAPAVERINE HCL DETERMINATION

2019 ◽  
pp. 211-217 ◽  
Author(s):  
ILMA NUGRAHANI ◽  
STEPHANIE SULISTIANA ◽  
SLAMET IBRAHIM
Keyword(s):  
Hair Sample ◽  
Method Development ◽  
Limit Of Detection ◽  
Area Under The Curve ◽  
Forensic Analysis ◽  
Percent Recovery ◽  
Relative Standard ◽  
Validation Parameters ◽  
Limit Of Quantitation ◽  
Papaverine Hydrochloride

Objective: This study was aimed to develop a rapid analysis using FTIR (Fourier Transform Infra-Red) for papaverine hydrochloride (HCl) determination in the hair sample, supported by a mathematically manipulation; which never been reported before in toxicology and forensic analysis. Methods: Firstly, the method was checked its validity to ensure the feasibility for the quantitative purpose. The absorbance spectrums were collected by measure the drug, matrix, and its mixture. A spectra which showed the best specificity and linearity then was selected and derived. Afterwards, the area under the curve (AUC) was measured. A series of concentration was used for compose the calibration curve. Based on the result, some validation parameters were checked thoroughly. Further, for sample preparation, hair was collected non-invasively, then was decontaminated using soap. Next, it was immersed into a papaverine HCl solution at a concentration of 25 mg/ml along days. Finally, the amount of drugs absorbed were measured by the developed method using FTIR. Results: Experimental data showed that all validation parameters could be fulfilled by the developed method. The selected spectra for the content determination was 1320-1230 cm-1. Its linearity was represented by a correlation coefficient value (r) ≥ 0.9999, variation coefficient (Vxo) ≤ 2.0%. The limit of detection (LOD) was 0.00618% w/w, meanwhile, the limit of quantitation (LOQ) was 0.02060% w/w, respectively. The percent recovery was in the range 97-103% with the relative standard deviation (RSD) was ≤ 2.0%. The drug has detected after 72 h immersion, moreover, after 192 h the concentration gained was 0.1594±0.0011% w/w. Conclusion: As the conclusion, FTIR absorbance-derivative method is adequate as a rapid procedure for determine papaverine HCl in the hair sample. This method shows the appropriate of specificity, accuracy and precise. In addition, it shows the advantages of simplicity, green/eco-friendlier, and cost-efficiency.

Sign in / Sign up

Export Citation Format

Share Document