INFLUENCE OF GAS-MOTOR FUEL ON THE EFFECTIVE AND ENVIRONMENTAL PERFORMANCE OF DIESEL ENGINES

2020 ◽  
pp. 14-20
Author(s):  
Anatoly Nikolayevich Kartashevich ◽  
Vitaly Aleksandrovich Shaporev ◽  
Ruslan Sergeyevich Dargel
Keyword(s):  
Diesel Engines ◽  
Environmental Performance ◽  
Motor Fuel

scholarly journals Environmental Performance of Diesel Engines Running on Motor Fuel With Microalgae Bio-additives

2021 ◽  
pp. 40-43
Author(s):  
S.A. Nagornov ◽  
◽  
A.N. Zazulya ◽  
Yu.V. Meshcheryakov ◽  
I.G. Golubev ◽  
...  
Keyword(s):  
Dietary Supplements ◽  
Sulfur Content ◽  
Vegetable Oils ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Diesel Exhaust ◽  
Environmental Performance ◽  
Cetane Number ◽  
Motor Fuel ◽  
Exhaust Gases

The prospects of using blended motor fuel with bioadditives from microalgae in diesel engines are shown. It has been proven that the composition of microalgae lipids is similar to that of vegetable oils. It was revealed that the density, viscosity and cetane number of the dietary supplements are higher and the sulfur content is lower in comparison with diesel fuel. It has been experimentally established that with an increase in the content of bioadditives in mixed motor fuel the smoke and toxicity of diesel exhaust gases decrease.

DEVELOPMENT OF THE COMBUSTION CHAMBER OF GAS ENGINE, CONVERTED ON THE BASIS OF DIESELS D-120 OR D-144 ENGINES TO WORK FOR ON LIQUEFIED PETROLEUM GAS

2019 ◽  
pp. 2-8
Author(s):  
Serhii Kovalov
Keyword(s):  
Combustion Chamber ◽  
Compression Ratio ◽  
Diesel Engines ◽  
Combustion Engine ◽  
Motor Fuel ◽  
Liquefied Petroleum Gas ◽  
Gas Engine ◽  
Chamber Volume ◽  
Motor Fuels ◽  
Dynamic Cycle

The expediency of using vehicles of liquefied petroleum gas as a motor fuel, as com-pared with traditional liquid motor fuels, in particular with diesel fuel, is shown. The advantages of converting diesel engines into gas ICEs with forced ignition with respect to conversion into gas diesel engines are substantiated. The analysis of methods for reducing the compression ratio in diesel engines when converting them into gas ICEs with forced ignition has been carried out. It is shown that for converting diesel engines into gas ICEs with forced ignition, it is advisable to use the Otto thermo-dynamic cycle with a decrease in the geometric degree of compression. The choice is grounded and an open combustion chamber in the form of an inverted axisymmetric “truncated cone” is developed. The proposed shape of the combustion chamber of a gas internal combustion engine for operation in the LPG reduces the geometric compression ratio of D-120 and D-144 diesel engines with an unseparated spherical combustion chamber, which reduces the geometric compression ratio from ε = 16,5 to ε = 9,4. The developed form of the combustion chamber allows the new diesel pistons or diesel pistons which are in operation to be in operation to be refined, instead of making special new gas pistons and to reduce the geometric compression ratio of diesel engines only by increasing the combustion chamber volume in the piston. This method of reducing the geometric degree of compression using conventional lathes is the most technologically advanced and cheap, as well as the least time consuming. Keywords: self-propelled chassis SSh-2540, wheeled tractors, diesel engines D-120 and D-144, gas engine with forced ignition, liquefied petroleum gas (LPG), compression ratio of the internal com-bustion engine, vehicles operating in the LPG.

scholarly journals Investigation of the characteristics of a marine diesel engine when running on fuel with a water additive

2021 ◽  
Vol 2131 (2) ◽  
pp. 022074
Author(s):  
S Andriushchenko ◽  
S Titov ◽  
G Yur
Keyword(s):  
Diesel Engines ◽  
Environmental Performance ◽  
High Speed ◽  
Gas Purification ◽  
Nitrogen Oxide Emissions ◽  
Engine Operation ◽  
Air Supply ◽  
Operation Process ◽  
Marine Diesel ◽  
Diesel Cylinder

Abstract Currently, environmental specifications of marine diesel engines become more stringent. There are two well-known and popular ways to improve engine environmental performance: the internal method is based on operation process improvement, as well as on the use of various fuel additives or air supply to the diesel cylinder. Another method is external (gas purification using catalysts and filters). The article considers one of these possible ways of reducing nitrogen oxides in marine diesel engines by using a water agent in fuel with various water phase dispersion degrees. The high-speed characteristics of the ship engine operation under various modes using “L” brand diesel fuel and emulsions are given. Studies have shown that when converting diesel from pure fuel to a microheterogenous emulsion (water inclusions’ diameter 5-10 microns), the concentration of NOx decreased by 1.4 times, fuel consumption increased by (4-5) g/(kWh), with an increase in the maximum combustion pressure by 0.7 MPa. The tests have confirmed the effectiveness of using a microheterogenous emulsion to reduce nitrogen oxide emissions.

Rapeseed Oil Plant

2020 ◽  
pp. 59-62
Author(s):  
E. V. Ovchinnikov ◽  
S. Yu. Uyutov ◽  
S. S. Shevelev ◽  
A. D. Dubrovsky
Keyword(s):  
Diesel Engine ◽  
Vegetable Oil ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Rapeseed Oil ◽  
Motor Fuel ◽  
Fuel System ◽  
Engine Operation ◽  
Oil Fuel ◽  
Technical Solutions

This article off ers a method and technical solutions for using vegetable oil fuel as fuel for a diesel engine. The use of rapeseed as a fuel is hindered by its peculiarity, namely, the main problem is the high viscosity and high self-ignition temperature relative to diesel fuel. The authors propose technical solutions that ensure the use of vegetable oil fuel as a motor fuel in diesel engines. For research purposes, a two-fuel system was developed, manufactured and tested, which allows working part of the time on diesel fuel and part of the time on vegetable oil, in particular on rapeseed oil, depending on the engine operating modes. Experiments have shown high effi ciency of the two-fuel system, which excludes negative consequences for the diesel engine. As a result of the research, the team of authors obtained results and conclusions confirming that the dual fuel system allows the use of vegetable oils as motor fuel in diesel engines, while the engine operation is possible in all modes.

scholarly journals Study on the Possibility of Improving the Environmental Performance of Diesel Engine Using Carbon Nanotubes as a Petroleum Diesel Fuel Additive

Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4345 ◽  
Author(s):  
Vladimir Markov ◽  
Vyacheslav Kamaltdinov ◽  
Anatoliy Zherdev ◽  
Viktor Furman ◽  
Bowen Sa ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Diesel Engine ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Environmental Performance ◽  
Experimental Studies ◽  
Fuel Additive ◽  
Full Load ◽  
Wide Range ◽  
Load Mode

The relevance of this article is due to the need for improving indicators of exhaust gas toxicity of diesel engines. One of the modern directions of achieving the required environmental performance of diesel engines is the addition of various nanomaterials to petroleum diesel fuel. The aim of the present study was to investigate the possibility of improving the environmental performance of a diesel engine for a generator set using carbon nanotubes as an additive to petroleum diesel fuel in an amount of up to 500 mg/L. Experimental studies were carried out on a D-243 diesel engine operating in a wide range of loads from idle to full load with the addition of 125, 250, and 500 mg/L of carbon nanotubes in the diesel fuel. The mixing of petroleum diesel fuel with nanotubes was done using an ultrasonic unit. The possibility of improving the environmental performance of the studied diesel engine fueled with carbon nanotube-blended petroleum diesel fuel was examined. Results showed that, in the full-load mode of diesel operation, the addition of 500 mg/L of carbon nanotubes to diesel fuel enabled the engine to reduce exhaust smoke from 26.0% to 11.2% on the Hartridge scale.

scholarly journals Improvement of mixing processes in diesel engines

2021 ◽  
Vol 3 (1(59)) ◽  
pp. 16-18
Author(s):  
Ludmila Knaub
Keyword(s):  
Diesel Engines ◽  
Environmental Performance ◽  
Fuel Injection ◽  
Combustible Mixture ◽  
Gas Condensate ◽  
Mixing Processes ◽  
Engine Operation ◽  
Injection Speed ◽  
Gas Dynamic

The object of research is gas-dynamic vortex processes in heterogeneous polydisperse flows. One of the most problematic issues in engine building is the completeness of combustion and the rate of fuel burnout in the given coordinates on the allotted hourly interval in the combustion chamber. These indicators, in turn, determine stringent requirements for used fuels in terms of thermophysical parameters that affect sawing, evaporation and mixing with an oxidizer. In the course of the study, methods of mathematical modeling were used based on the theory of similarity. Methods have been developed for preparing a combustible mixture for detonation-free combustion of a cheap alternative fuel. A method for assessing the quality of spraying low cetane fuel is proposed. A mathematical model is obtained for calculating the change in the parameters of the quality of atomization and the differential characteristics of fuel injection. This is necessary for theoretical studies of gas-dynamic processes in additional power systems for diesel engines in an unsteady three-dimensional flow with variable parameters of a polydisperse flow of a combustible mixture. It has been proven that with a decrease in the camshaft rotational speed, the injection speed will be insufficient to achieve the required spray quality due to a decrease in the speed. This made it possible to redesign the additional system using a separate dual fuel supply. Research samples of an additional power supply system for the ЯМЗ–24 ОН diesel engine (Yaroslavl Motor Plant, Russia) have been developed. Comparative tests of the engine operation on stable gas condensate with the main fuel equipment and an additional system have been carried out. Oscillograms of the tests were obtained and analyzed. The research results provided the basis for the use of low cetane cheap gas condensate in diesel engines. This will improve the economic, power and environmental performance of the engines. Compared to standard cetane fuels, the price of fuel will decrease by 40 %, engine power will increase by 20 %, and the environmental performance of exhaust gases will decrease by 10–30 %.

Sign in / Sign up

Export Citation Format

Share Document