Rapeseed Oil Plant

Author(s):  
E. V. Ovchinnikov ◽  
S. Yu. Uyutov ◽  
S. S. Shevelev ◽  
A. D. Dubrovsky

This article off ers a method and technical solutions for using vegetable oil fuel as fuel for a diesel engine. The use of rapeseed as a fuel is hindered by its peculiarity, namely, the main problem is the high viscosity and high self-ignition temperature relative to diesel fuel. The authors propose technical solutions that ensure the use of vegetable oil fuel as a motor fuel in diesel engines. For research purposes, a two-fuel system was developed, manufactured and tested, which allows working part of the time on diesel fuel and part of the time on vegetable oil, in particular on rapeseed oil, depending on the engine operating modes. Experiments have shown high effi ciency of the two-fuel system, which excludes negative consequences for the diesel engine. As a result of the research, the team of authors obtained results and conclusions confirming that the dual fuel system allows the use of vegetable oils as motor fuel in diesel engines, while the engine operation is possible in all modes.

Author(s):  

The necessity of adapting diesel engines to work on vegetable oils is justified. The possibility of using rapeseed oil and its mixtures with petroleum diesel fuel as motor fuels is considered. Experimental studies of fuel injection of small high-speed diesel engine type MD-6 (1 Ch 8,0/7,5)when using diesel oil and rapeseed oil and computational studies of auto-tractor diesel engine type D-245.12 (1 ChN 11/12,5), working on blends of petroleum diesel fuel and rapeseed oil. When switching autotractor diesel engine from diesel fuel to rapeseed oil in the full-fuel mode, the mass cycle fuel supply increased by 12 %, and in the small-size high-speed diesel engine – by about 27 %. From the point of view of the flow of the working process of these diesel engines, changes in other parameters of the fuel injection process are less significant. Keywords diesel engine; petroleum diesel fuel; vegetable oil; rapeseed oil; high pressure fuel pump; fuel injector; sprayer


1988 ◽  
Vol 110 (3) ◽  
pp. 437-443 ◽  
Author(s):  
C. M. Urban ◽  
H. E. Mecredy ◽  
T. W. Ryan ◽  
M. N. Ingalls ◽  
B. T. Jett

The U.S. Department of Energy, Morgantown Energy Technology Center has assumed a leadership role in the development of coal-burning diesel engines. The motivation for this work is obvious when one considers the magnitude of the domestic reserves of coal and the widespread use of diesel engines. The work reported in this paper represents the preliminary engine experiments leading to the development of a coal-burning, medium-speed diesel engine. The basis of this development effort is a two-stroke, 900 rpm, 216-mm (8.5-in.) bore engine manufactured by Electro-Motive Division of General Motors Corporation. The engine, in a minimally modified form, has been operated for several hours on a slurry of 50 percent (by mass) coal in water. Engine operation was achieved in this configuration using a pilot injection of diesel fuel to ignite the main charge of slurry. A standard unit injector, slightly modified by increasing diametric clearances in the injector pump and nozzle tip, was used to inject the slurry. Under the engine operating conditions evaluated, the combustion efficiency of the coal and the NOx emissions were lower than, and the particulate emissions were higher than, corresponding diesel fuel results. These initial results, achieved without optimizing the system on the coal slurry, demonstrate the potential for utilizing coal slurry fuels.


Author(s):  
A. K. Babu ◽  
G. Devaradjane

The intent of this paper is to summarize the state of knowledge on use of vegetable oils as diesel fuels. Fuel related properties are reviewed and compared with conventional diesel fuel. The use of neat vegetable oil (edible and/or nonedible), biodiesel and its blends in a diesel engine has been discussed. Performance and emission characteristics are highlighted. Suitability of different combustion chambers for diesel engine operation with vegetable oils is outlined. Techniques to decrease viscosities are discussed. An overview on current developments on the use of vegetable oils directly and indirectly in diesel engines is presented.


Trudy NAMI ◽  
2021 ◽  
pp. 16-24
Author(s):  
Sh. V. Buzikov ◽  
S. A. Plotnikov ◽  
I. S. Kozlov

Introduction (problem statement and relevance). Today, vegetable oils, in particular, rapeseed oil (RO) are widely used types of fuels for diesel engines. The main physicochemical properties of RO are somewhat similar to diesel fuel (DF). However, one can highlight a large fraction of the oxygen content in it, which affects the fuel combustion intensity in diesel cylinders. In this regard, the addition of rapeseed oil is very important to optimize the composition of mixed fuel (MF) for its use in diesel engines. The purpose of the study was optimizing the MF composition and obtaining experimental data of diesel engine effective performance by means of regression analysis.Methodology and research methods. To optimize the MF composition studies were carried out to determine the relative fractions of carbon, hydrogen, oxygen in RO and MF, as well as bench tests of diesel fuel and MF with various RO additives operation, followed by the regression analysis of effective indicators.Scientifi c novelty and results. The effective performance dependences of the diesel engine on the RO content in the MF have been determined. Basing on the obtained load characteristics of the diesel engine, it was concluded that an increase in the average effective pressure from 0.2 to 1.2 MPa, as well as in the share of RO in MF from 0 to 80%, would lead to an increase in the effective specifi c fuel consumption to 383–506 g/kW·h and the decrease in effective effi ciency by 14–28%. On the basis of the regression analysis the maximum values of the optimality criterion indicators D-optimum = 0.98–1.0 with the addition of RO to MF from 45 to 50% were determined.Practical signifi cance. The value of the maximum permissible composition of MF, consisting of 50–55% of diesel fuel and 45–50% of RO and ensuring maximum compliance with the specifi ed conditions of optimality on the diesel engine under consideration has been obtained.


10.12737/6632 ◽  
2014 ◽  
Vol 3 (6) ◽  
pp. 19-30 ◽  
Author(s):  
Сивачев ◽  
V. Sivachev ◽  
Маркова ◽  
V. Markova ◽  
Марков ◽  
...  

The advantages of vegetable oil-based biofuels using in diesel engines have been demonstrated. Methods for determining of optimal composition for mixed fuels containing petroleum diesel fuel and methyl ester of rapeseed oil have been proposed. Optimization calculations of such mixed fuel composition for a type 245.12С diesel engine have been carried out using the proposed methods. It has been shown that a mixture containing 60 % of petroleum diesel fuel and 40 % of methyl ester of rapeseed oil has the best ecological characteristics among the researched mixed biofuels. Even better ecological characteristics are reached when such mixture’s ingredients are regulated according to changes of the engine’s shaft rotation speed and load.


Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8554
Author(s):  
Leonid Plotnikov ◽  
Nikita Grigoriev

Reducing harmful emissions from exhaust gases and increasing energy efficiency are urgent tasks when designing reciprocating internal combustion engines. In this experimental work, the fuel system of a diesel locomotive engine operating on the Miller cycle is improved. The purpose of the study is to improve the environmental and economic indicators of diesel engines at minimal financial cost. The article provides an overview of the main research on improving fuel supply, mixing and combustion. The features of engine operation are also briefly described. Numerical simulation of the diesel engine operating cycle was performed before the bench tests. The experiments were performed on a full-size diesel engine with a power of 1200 kW. The measuring equipment and experimental technique are described in the article. The technical solutions that made it possible to improve the fuel supply are described. A new design for the high-pressure fuel pump drive is proposed. The optimal fuel injection advance angles are determined. An original design for the fuel pump plunger was developed. The proposed technical solutions made it possible to reduce fuel consumption by up to 3% (from 217.8 to 211.4 g/kW·h) and NOx emissions two-fold (from 19.4 to 8.8 g/kW·h).


Author(s):  
Petar Kazakov ◽  
Atanas Iliev ◽  
Emil Marinov

Over the decades, more attention has been paid to emissions from the means of transport and the use of different fuels and combustion fuels for the operation of internal combustion engines than on fuel consumption. This, in turn, enables research into products that are said to reduce fuel consumption. The report summarizes four studies of fuel-related innovation products. The studies covered by this report are conducted with diesel fuel and usually contain diesel fuel and three additives for it. Manufacturers of additives are based on already existing studies showing a 10-30% reduction in fuel consumption. Comparative experimental studies related to the use of commercially available diesel fuel with and without the use of additives have been performed in laboratory conditions. The studies were carried out on a stationary diesel engine СМД-17КН equipped with brake КИ1368В. Repeated results were recorded, but they did not confirm the significant positive effect of additives on specific fuel consumption. In some cases, the factors affecting errors in this type of research on the effectiveness of fuel additives for commercial purposes are considered. The reasons for the positive effects of such use of additives in certain engine operating modes are also clarified.


2020 ◽  
pp. 22-30
Author(s):  
SERGEY N. DEVYANIN ◽  
◽  
VLADIMIR A. MARKOV ◽  
ALEKSANDR G. LEVSHIN ◽  
TAMARA P. KOBOZEVA ◽  
...  

The paper presents the results of long-term research on the oil productivity and chemical composition of soybean oil of the Northern ecotype varieties in the Central Non-Black Earth Region. The authors consider its possible use for biodiesel production. Experiments on growing soybeans were carried out on the experimental fi eld of Russian State Agrarian University –Moscow Timiryazev Agricultural Academy (2008-2019) on recognized ultra-early ripening varieties of the Northern ecotype Mageva, Svetlaya, Okskaya (ripeness group 000). Tests were set and the research results were analyzed using standard approved methods. It has been shown that in conditions of high latitudes (57°N), limited thermal resources of the Non-Chernozem zone of Russia (the sum of active temperatures of the growing season not exceeding 2000°С), the yield and productivity of soybeans depend on the variety and moisture supply. Over the years, the average yield of soybeans amounted to 1.94 … 2.62 t/ha, oil productivity – 388 … 544 kg/ha, oil content – 19…20%, the content of oleic and linoleic fatty acids in oil – 60%, and their output from seeds harvested – 300 kg/ha. It has been established that as soybean oil and diesel fuel have similar properties,they can be mixed by conventional methods in any proportions and form stable blends that can be stored for a long time. Experimental studies on the use of soybean oil for biodiesel production were carried out on a D-245 diesel engine (4 ChN11/12.5). The concentrations of toxic components (CO, CHx, and NOx) in the diesel exhaust gases were determined using the SAE-7532 gas analyzer. The smoke content of the exhaust gases was measured with an MK-3 Hartridge opacimeter. It has been experimentally established that the transfer of a diesel engine from diesel fuel to a blend of 80% diesel fuel and 20% lubrication oil leads to a change in the integral emissions per test cycle: nitrogen oxides in 0.81 times, carbon monoxide in 0.89 times and unburned hydrocarbons in 0.91 times, i.e. when biodiesel as used as a motor fuel in a serial diesel engine, emissions of all gaseous toxic components are reduced. The study has confi rmed the expediency of using soybeans of the Northern ecotype for biofuel production.


2011 ◽  
Vol 35 (8) ◽  
pp. 3687-3697 ◽  
Author(s):  
Grau Baquero ◽  
Bernat Esteban ◽  
Jordi-Roger Riba ◽  
Antoni Rius ◽  
Rita Puig

2021 ◽  
pp. 28-32
Author(s):  
VALERIY L. CHUMAKOV ◽  

The paper shows some ways to improve the environmental characteristics of a diesel engine using gaseous hydrocarbon fuel and operating the engine in a gas-diesel cycle mode. Some possibilities to reduce toxic components of exhaust gases in a gas-diesel engine operating on liquefi ed propane-butane mixtures have been studied. Experiments carried out in a wide range of load from 10 to 100% and speed from 1400 to 2000 rpm showed that the gas-diesel engine provides a suffi ciently high level of diesel fuel replacement with gas hydrocarbon fuel. The authors indicate some eff ective ways to reduce the toxicity of exhaust gases. The engine power should be adjusted by the simultaneous supply of fuel, gas and throttling the air charge in the intake manifold. This method enriches the fi rst combusting portions to reduce nitrogen oxides and maintains the depletion of the main charge within the fl ammability limits of the gas-air charge to reduce carbon monoxide and hydrocarbons. The authors found that when the engine operates in a gas-diesel cycle mode, the power change provides a decrease in nitrogen oxide emissions of gas-diesel fuel only due to gas supply in almost the entire load range as compared to the pure diesel. At high loads (more than 80%) stable engine operation is ensured up to 90% of diesel fuel replaced by gas. Even at 10% of diesel fuel used the concentration of nitrogen oxides decreases by at least 15…20% as compared with a diesel engine in the entire load range. However, there is an increased emission of hydrocarbons and carbon monoxide in the exhaust gases. Further experimental studies have shown that optimization of the gas diesel regulation can reduce the mass emission of nitrogen oxides contained in exhaust gases in 2…3 times and greatly reduce the emission of incomplete combustion products – carbon monoxide and hydrocarbons.


Sign in / Sign up

Export Citation Format

Share Document