ANALISIS WASTE PADA PROSES PEMBONGKARAN PETI KEMAS DENGAN PENDEKATAN LEAN SERVICE DI PT PELINDO I CABANG LHOKSEUMAWE

2021 ◽  
Vol 10 (2) ◽  
Author(s):  
Munawwaroh Daulay ◽  
Amri Amri ◽  
Syukriah Syukriah
Keyword(s):  
Lead Time ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Cycle Efficiency

PT Pelindo I Cabang Lhokseumawe merupakan pelabuhan yang menyediakan pelayanan dermaga dan fasilitas lain untuk bertambat, bongkar muat peti kemas, curah cair dan curah kering. Dalam prakteknya, terdapat beberapa jenis pemborosan pada proses pembongkaran peti kemas yang dapat menurunkan produktivitas perusahaan. Permasalahan dalam penelitian ini adalah waktu proses pembongkaran peti kemas tidak sesuai dengan standar yang di tetapkan oleh perusahaan yaitu 20 container/jam sedangkan di lapangan hanya dapat membongkar 9 container/jam. Hal ini disebabkan oleh aktivitas yang tidak memiliki nilai tambah yang berdampak pada waktu transportasi dan waktu menunggu yang lama. Tujuan dari penelitian ini adalah mengidentifikasi waste yang terdapat pada aliran proses pembongkaran peti kemas dan mengusulkan perbaikan guna mengeliminasi waste. Metode yang digunakan adalah lean service dan Value Stream Mapping. Berdasarkan hasil perhitungan data diketahui bahwa jenis pemborosan yang paling berpengaruh adalah transportasi sebesar 45,60% dan waiting sebesar 29,47%. Oleh karena itu, usulan perbaikan adalah perlunya penjadwalan dan pengalokasian waktu bongkar muat, penyediaan crane dengan kondisi yang sesuai, pelatihan bagi operator dan pembuatan SOP slot penyusunan peti kemas. Hasil perhitungan usulan perbaikan setelah penerapan lean service menunjukkan jumlah container mengalami peningkatan dari 9 container/jam menjadi 12 container/jam, penurunan waktu lead time dari 413,03 detik menjadi 300,06 dan peningkatan Process Cycle Efficiency dari 34,04% menjadi 58,75%, hal ini bermakna bahwa adanya peningkatan produktivitas perusahaan setelah penerapan lean service.

scholarly journals WASTE ELIMINATION USING VALUE STREAM MAPPING AND VALSAT

2017 ◽  
Vol 3 (2) ◽  
Author(s):  
Dion Avellino Suyanto ◽  
Sunday Noya
Keyword(s):  
Lean Manufacturing ◽  
Lead Time ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Current State ◽  
Future State ◽  
Analysis Tools ◽  
Fierce Competition ◽  
Cycle Efficiency ◽  
Working Efficiency

Fierce competition encourages companies to make continuous improvements to achieve better working efficiency. One method to improve the working efficiency is using the concept of lean manufacturing. The efficiency of the existing work in PT. Rimba Kencana is still not good because there are many processes that are not uniform and because of that, production lead time is increased. By using value stream mapping and value stream analysis tools (VALSAT), the production processes in the company are mapped into the current state mapping and future state mapping. In the current state mapping, the total value of production lead time is 59.49 days and the value of process cycle efficiency (PCE) is 0.013%. After doing improvement on welding department, the total value of production lead time decreased to 48.22 days and the value of process cycle efficiency becomes 0.016%. Keywords: Efficiency, Value Stream Mapping, Value Stream Analysis Tools

scholarly journals Penerapan Lean Manufacturing Untuk Mengidentifikasi Dan Menurunkan Waste (Studi Kasus CV Tanara Textile)

2019 ◽  
Vol 5 (1) ◽  
pp. 1-7
Author(s):  
Catur Kusbiantoro ◽  
Ellysa Nursanti
Keyword(s):  
Lean Manufacturing ◽  
Lead Time ◽  
Value Added ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Work In Process ◽  
Cycle Efficiency

CV. Tanara Textile merupakan salah satu perusahaan tekstil yang termasuk dalam kelompok industri penyempurnaan kain berupa kain kaos. Pada proses produksi di perusahaan masih ditemukan beberapa waste. Penelitian ini bertujuan untuk mengidentifikasi dan menurunkan waste yang terjadi pada proses produksi maka digunakan pendekatan lean manufacturing. Metode Value Stream Mapping (VSM) digunakan untuk pemetaan aliran produksi dan aliran informasi terhadap suatu produk pada tingkat produksi total, melakukan wawancara untuk pembobotan penyebab 7 waste yang sering terjadi pada proses produksi, VALSAT untuk menganalisa pemborosan dari hasil pembobotan yang selanjutnya melakukan detailed mapping tools, serta analisis FMEA untuk mengetahui penyebab kegagalan prosesyang terjadi di lini produksi lalu menghitung nilai RPN tertinggi. Selanjutnya melakukan usulan perbaikan untuk menurunkan waste unnecessary inventory serta menganalisis perbaikan secara berkelanjutan dengan PDCA. Waste terbesar ada pada Unncessary Inventory sebesar 28,571% faktor penyebabnya adalah penumpukan bahan baku, work in process (WIP), sparepart yang tidak terpakai dan penimbunan pada finished goods Sebelum perbaikan proses produksi 16 hari 9 jam dimana Value Added 6 hari 4 jam dan Lead Time 10 hari 4 jam, setelah perbaikan proses produksi menjadi 14 hari 5 jam dimana Value Added 6 hari 4 jam dan Lead Time 8 hari 1 jam, dengan demikian dapat meningkatkan process cycle efficiency sebesar 17,19% dan menghemat lead time sebesar 2,546% dengan penurunan waste sebesar 8,31%

scholarly journals PENERAPAN LEAN MANUFACTURING UNTUK MENINGKATKAN KAPASITAS PRODUKSI DENGAN CARA MENGURANGI MANUFACTURING LEAD TIME STUDI KASUS: PT ORIENTAL MANUFACTURING INDONESIA

2016 ◽  
Vol 1 (1) ◽  
pp. 49
Author(s):  
Sumiharni Batubara ◽  
Raden Abdurrahman Halimuddin
Keyword(s):  
Lean Manufacturing ◽  
Lead Time ◽  
Value Stream Mapping ◽  
Left Hand ◽  
Value Stream ◽  
Inspection Process ◽  
Target Production ◽  
Final Inspection ◽  
Cycle Efficiency ◽  
A Company

PT Oriental Manufacturing Indonesia is a company engaged in the manufacturing industries that produce plastics components for the automotive industry. The main problem that occurs is the target production of Final Assy. Front Door is not reached as a manufacturing lead time (MLT) is too long.The purpose of this research is to reduce the Manufacturing Lead Time (MLT) so that production targets can be achieved. Lean Manufacturing approach used to reduce the waste that occurs. The first step is to create Value Stream Mapping (VSM), which describes the overall process. From the VSM waste can be identified in the some activities (changeover mold) and one activity (final inspection). MLT improvement performed by using Single Minute Exchange of Dies on mold changeover activity and Left Hand Right Hand Mapping on the final inspection process. As the result of improvement, the value of process cycle efficiency has increased by 11.35% from 36,88% to 48,55%. Manufacturing Lead Time has decreased from 35.327 seconds to 26.834 seconds.

scholarly journals LEAN SUPPLY CHAIN UNTUK MENINGKATKAN EFISIENSI SISTEM MANUFAKTUR PADA PT. XYZ

2017 ◽  
Vol 7 (2) ◽  
Author(s):  
Iveline Anne Marie ◽  
Dedy Sugiarto ◽  
Dara Mustika
Keyword(s):  
Supply Chain ◽  
Lead Time ◽  
Storage Time ◽  
Value Added ◽  
Raw Material ◽  
Value Stream Mapping ◽  
Company Performance ◽  
Value Stream ◽  
Cycle Efficiency ◽  
Lean Supply Chain

There were wastes in the supply chain flow of PT. XYZ which leads to long lead time in the delivery of customer orders. The result is that the company's planned delivery targets are not fulfilled. The objective of this research is to identify waste and cause of waste and to propose improvement to eliminate waste in PT XYZ supply chain so as to reduce lead time and achieve delivery target as an effort to improve company performance with Lean Supply Chain approach. In this research we use VALSAT to minimize waste and non value added activities in supply chain flow. Based on Value Stream Mapping and analysis of waste we proposed improvements that is application of acceptance sampling method on raw material inspection, application of p control chart on assembling process and store warehouse, 2 days battery storage time limit with kanban card proposed and also change of process sequence of lead part casting. Based on the projection, we got the decrease of manufacturing lead time and the increase of process cycle efficiency from 51.47% to 73.69%.

Lean Solutions in Batch Manufacturing Process with Applicability in Bumpers Production

2016 ◽  
Vol 834 ◽  
pp. 205-210
Author(s):  
Elena Loredana Terzea ◽  
Antonia Cristina Barascu ◽  
Iulian Razvan Soare
Keyword(s):  
Automotive Industry ◽  
Food Processing ◽  
Lead Time ◽  
Batch Processes ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Industry Sector ◽  
Current Value ◽  
Lean Methods

Batch processes includes paint manufacturing, food processing, pharmaceutical industry, etc. The paper focuses on the process of paint manufacturing. The main contribution is the design of the current value stream mapping, very useful to understand the causes of waste and lead-time. This paper points out the necessity of applying lean methods within automotive industry, sector of bumpers painting and assembly, based on a real case-study.

scholarly journals Improving Quality Control Process Through Value Stream Mapping

2018 ◽  
Vol 7 (2.29) ◽  
pp. 219
Author(s):  
Zulfa Fitri Ikatrinasari ◽  
Dan Kosasih
Keyword(s):  
Quality Control ◽  
Lead Time ◽  
Value Added ◽  
Maximum Efficiency ◽  
Value Stream Mapping ◽  
Process Time ◽  
Value Stream ◽  
Current State ◽  
Future State ◽  
Quality Control Process

PT. AEMI is one of the growing electronic component manufacturing company. By this time, Kaizen project has been run and managed to become a culture in PT AEMI. However, the project has not integrated, comprehensive and not yet has a long-term goals. Implementation of value stream mapping (VSM) in PT AEMI is expected to make Kaizen projects more focused and to produce increasing of the maximum efficiency. In addition, VSM Kaizen is believed to make the those programs more integrated, effective and comprehensive. This study aims to: (1) create a current state mapping in the Department of Quality Control PT. AEMI, (2) identify wastes in the Department of Quality Control PT.AEMI, (3) create a future state mapping at the Department of Quality Control PT. AEMI, (4) make a plan of improvement and analyzing the application. Stages of the study were as follows: (1) identification of work processes, (2) collect and analysis of work process time, (3) analysis of the current state mapping, (4) calculate of lead time and process time, (5) analysis of value added and non value-added activities, (6) analysis of wastes, (7) make a plan of future state mapping, (8) improvement design (improvement planning), (9) implementation of improvement, (10) analysis of the implementation of improvements. The results of this study are: 1) current state mapping at QC Department shows that the total lead time of 848 minutes where there is non-value added activity of 778 minutes. 2) identify waste on the handling process where the product movement from assembly to QC for 2 minutes, movement transactions from assembly to QC for 479 minutes and the waiting time at  inspection area for 727 minutes. 3) future state mapping at QC Department shows that the total lead time of 516.5 minutes where there is non-value added activity of 446.5 minutes. 4) the improvement to do is to change the lay out where final inspection is moved from QC to manufacturing so as to result in reduce of non-value added activity by 46%. 

scholarly journals Perbaikan Efisiensi Jalur Layanan Pasien Rumah Sakit dengan Menggunakan Pendekatan Lean Healthcare

2020 ◽  
Vol 3 (4) ◽  
pp. 509-521
Author(s):  
Wresni Anggraini ◽  
Anifah Naswan Ilhamda
Keyword(s):  
Value Added ◽  
Root Cause Analysis ◽  
Value Stream Mapping ◽  
Cause Analysis ◽  
Value Stream ◽  
Root Cause ◽  
Current State ◽  
Future State ◽  
Lean Healthcare ◽  
Cycle Efficiency

Standar pelayanan minimal rumah sakit tentang waktu tunggu untuk rawat jalan yang ditetapkan oleh Kemenkes Nomor. 129/Menkes/SK/II/2008 adalah tidak lebih dari 60 menit.  Masalah yang dihadapi oleh Poli Tulip Rumah Sakit X Pekanbaru adalah waktu menunggu pasien lebih dari 60 menit.  Tujuan dari penelitian ini adalah memberikan usulan perbaikan untuk mengurangi waktu tunggu pasien.. Metode yang digunakan pada penelitian ini adalah  lean healthcare menggunakan analisis Value Stream Mapping (VSM) untuk menentukan nilai Process Cycle Efficiency (PCE). Berdasarkan current state value stream mapping nilai PCE saat ini adalah 16,85%, ini berarti efisiensi lini pada Poli Tulip Rumah Sakit X Pekanbaru masih sangat rendah. Proses usulan perbaikan efisiensi lini dengan cara mengidentifikasi dan mengurangi non value added activity dan waste yang paling sering terjadi pada proses pelayanan pasien. Ditemukan waste yang berpengaruh menyebabkan waste delay adalah waste unnecessary movement dan lost oppurtunity to retain or win customers yaitu sebesar 22,11%. Untuk mencari akar penyebab waste dilakukan root cause analysis. Akar penyebab masalah dari waste yang terjadi di lini pelayanan pasien bersumber dari faktor individual pegawai dan manajerial Rumah Sakit. Simulasi future state value stream mapping dengan menggunakan ARENA dilakukan untuk menguji usulan perbaikan, didapatkan  nilai PCE harapan sebesar 36,18 %, yang berarti dengan usulan perbaikan yang diberikan telah meningkatkan efisiensi jalur layanan pasien di Poli Tulip sebesar 19,33%.

scholarly journals MEMINIMASI PEMBOROSAN DENGAN LEAN MANUFACTURING PADA PROSES PRODUKSI DI PT. IE

2021 ◽  
pp. 1451
Author(s):  
Ahmad Ahmad ◽  
Helena JK ◽  
Andrean Yonathan
Keyword(s):  
Waiting Time ◽  
Cycle Time ◽  
Lean Manufacturing ◽  
Lead Time ◽  
Fault Tree Analysis ◽  
Value Stream Mapping ◽  
Tree Analysis ◽  
Value Stream ◽  
Current State ◽  
Future State

PT. IE is engaged in the business of making Lighting and Lampposts. Based on observations and interviews, there are still some wastes that arise in the flow of the production process, among which there are still many wastes of waiting time, transportation, movement and inventory. These wastes cause the product completion time to be longer and the resulting quality decreases. To eliminate or reduce waste, it is necessary to apply Lean Manufacturing. Lean Manufacturing is a systematic approach to eliminating waste and changing processes by identifying and reducing waste with continuous improvement and striving to create a production flow along the value stream by eliminating all forms of waste and increasing the added value of products to customers. From the Pareto diagram, it is found that transportation waste has the highest percentage of 26.21%, waiting time is 21.38%, motion waste is 19.31% and waste inventories are 15.17%. while the results of the Value Stream Mapping Current State Map mapping obtained a production lead time of 7,680 seconds and a total cycle time of 6,660 seconds and a PCE Current State Map value of 53.09%. Identify the root causes of waste using Fishbone diagrams, 5 Why Analysis, 5W+1H, Fault Tree Analysis and FMEA. After corrective actions have been taken, based on the Value Stream Mapping Future mapping there is a decrease in production lead time to 5,220 seconds and a decrease in total cycle time to 4,860 seconds and an increase in PCE Future State Map to 68.10% so that there is an increase of 15.01% which shows The company's production process has become more Lean.PT. IE bergerak dalam bisnis pembuatan Lighting dan Tiang Lampu. Berdasarkan observasi dan wawancara, masih terdapat beberapa pemborosan (waste) yang timbul di aliran proses produksi di antaranya masih banyak terjadi pemborosan-pemborosan waktu tunggu, transportasi, gerakan dan inventori. Pemborosan-pemborosan tersebut menyebabkan waktu penyelesaian produk menjadi lebih lama dan kualitas yang dihasilkan menurun. Untuk menghilangkan atau mengurangi pemborosan diperlukan adanya penerapan Lean Manufacturing.Lean Manufacturing merupakan pendekatan sistematik untuk mengeliminasi pemborosan dan mengubah proses dengan cara mengidentifikasi dan mengurangi pemborosan dengan perbaikan kontinu dan berupaya untuk menciptakan aliran produksi sepanjang value stream dengan menghilangkan segala bentuk pemborosan serta meningkatkan nilai tambah produk kepada pelanggan. Dari diagram Pareto ditemukan waste transportasi memiliki persentase paling tinggi sebesar 26,21%, waktu tunggu  21,38%, waste motion 19,31% dan waste inventories 15,17%. sedangkan hasil pemetaan Value Stream Mapping Current State Map diperoleh production lead time selama 7.680 detik dan total cycle time selama 6.660 detik serta nilai PCE Current State Map sebesar 53,09%. Identifikasi akar permasalahan pemborosan menggunakan diagram Fishbone, 5 Why Analysis, 5W+1H, Fault Tree Analysis dan FMEA. Setelah dilakukan tindakan–tindakan perbaikan, berdasarkan pemetaan Value Stream Mapping Future ada penurunan production lead time menjadi 5.220 detik dan penurunan total cycle time menjadi 4.860 detik serta ada peningkatan PCE Future State Map menjadi 68,10% sehingga ada peningkatan 15,01% yang menunjukan proses produksi perusahaan telah menjadi lebih Lean.

scholarly journals Increasing Productivity by Reducing Manufacturing Lead Time through Value Stream Mapping

2012 ◽  
pp. 225-229
Author(s):  
Renu Yadav ◽  
Ashish Shastri ◽  
Mithlesh Rathore
Keyword(s):  
Lead Time ◽  
Value Added ◽  
Value Stream Mapping ◽  
Mapping Technique ◽  
Inventory Level ◽  
Lead Times ◽  
Business World ◽  
Value Stream ◽  
Current State ◽  
Future State

To survive in today’s competitive business world, companies require small lead times, low costs and high customer service levels. As such, companies pay more effort to reduce their manufacturing lead times. Value stream mapping (VSM) technique has been used on a broad scale in big companies such as Toyota and Boeing. This paper considers the implementation of value stream mapping technique in manufacturing helical springs by railway spring manufacturing company. It focuses on product family, current state map improvements and the future state map. The aim is to identify waste in the form of non value added activities & processes and then removing them to improve the performance of the company. Current state map is prepared to describe the existing position and various problem areas.. Future state map is prepared to show the proposed improvement action plans. The achievements of value stream implementation are reduction in lead time, cycle time and inventory level. It was found that even a small company can make significant improvements by adopting VSM technology. It was concluded that if we adopt the VSM technique the company could reduce the manufacturing lead time from 36.86 days to 34.06 days.

Improving the performance of a Malaysian pharmaceutical warehouse supply chain by integrating value stream mapping and discrete event simulation

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ahmed Abideen ◽  
Fazeeda Binti Mohamad
Keyword(s):  
Supply Chain ◽  
Lead Time ◽  
Discrete Event ◽  
Integrated Approach ◽  
Value Stream Mapping ◽  
Content Type ◽  
Value Stream ◽  
Future State ◽  
The Future ◽  
Value Stream Map

Purpose Lean implementation is vastly incorporated in core manufacturing processes; however, its applicability in the supply chain and service industry is still in its infancy. To acquire performance excellence and thrive in the global competitive market, many firms are adopting newer methodologies. But, there is a stringent need for production simulation systems to analyze supply chains both inbound and outbound. The era of face validation is slowly disappearing. Lean tools and procedures that provide future state assumptions need advanced tools and techniques to measure, quantify, analyze and validate them. The purpose of this study is to enable dynamic quantification and visualization of the future state of a warehouse supply chain value stream map using discrete event simulation (DES) technique. Design/methodology/approach This study aimed to apply an integrated approach of the value stream mapping (VSM) and DES in a Malaysian pharmaceutical production warehouse. The main focus is diverted towards reducing the warehouse supply chain lead time by initially constructing a supply chain value stream map (both present state and future state) and integrating its data in a DES modelling and simulation software to dynamically visualize the changes in future state value stream map. Findings The DES simulation was able to mimic the future state lead time reductions successfully, which assists in better decision-making. Improvements were seen related to total lead time, process time, value and non-value-added percentage. Warehouse performance metrics such as receiving, put away and storage rates were substantially improved along with pallet processing time, worker and forklift throughput usage percentage. Detailed findings are clearly stated at the end of this paper. Research limitations/implications This study is limited to the warehouse environment and further additional process models and functional upgrades in the DES software systems are very much needed to directly visualize and quantify all the possible Lean assumptions such as radio frequency image identification/Andon (Jidoka), 5S, Kanban, Just-In-Time and Heijunka. However, DES has a leading edge in extracting dynamic characteristics out of a static VSM timeline and capture details on discrete events precisely by picturizing facility modification and lead time related to it. Practical implications This paper includes all the fundamental pharmaceutical warehouse supply chain processes and the simulations of the future state VSM in a real-life context by successfully reducing supply chain lead time and allowing managers in inculcating near-optimal decision-making, controlling and coordinating warehouse supply chain activities as a whole. Social implications This integrated approach of DES and VSM can involve managers and top management to support the adoption of anticipated changes. This study also has the potential to engage practitioners, researchers and decision-makers in the warehouse industry. Originality/value This study involves a powerful DES software package that can mimic the real situation as a virtual simulation and all the data and model building are based on a real warehouse scenario in the pharmaceutical industry.

Sign in / Sign up

Export Citation Format

Share Document