scholarly journals Effect of Drying on Selected Physical Properties of “Asontem” Cowpea Variety

ISRN Agronomy ◽  
2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Ato Bart-Plange ◽  
Komla Agbeko Dzisi ◽  
Jonathan Ampah
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Average Length ◽  
Geometric Mean ◽  
Static Friction ◽  
Angle Of Repose ◽  
Length Width ◽  
Four Levels ◽  
Content Range ◽  
Cowpea Variety

Storage, handling, processing, and other postharvest operations of agricultural products require information about their physical properties for the design of related machinery. This study was carried out to evaluate the effect of drying on some physical properties of “asontem” cowpea variety within the moisture content range of 19.00% wb and 9.58% wb using standard techniques. Four levels of moisture content were used namely, 19.00%, 15.13%, 11.50%, and 9.58% wb. The average length, width, and thickness decreased with decreasing moisture content from 8.16 to 7.11 mm, 6.36 to 6.28 mm and 4.77 to 4.61 mm respectively. The geometric mean diameter, surface area, and volume decreased nonlinearly with decreasing moisture content from 6.27 to 5.89 mm, 123.88 to 109.46 mm2, and 130.23 to 108.02 mm3, respectively. 1000 grain mass decreased non-linearly from 132.85 to 120.92 g and true density increased non-linearly with decreasing moisture content from 1063.80 to 1185.92 kg/m3. The filling angle of repose decreased non-linearly from 29.34 to 27.92°, while the coefficient of static friction also decreased non-linearly from 0.36 to 0.29, 0.35 to 0.28, and 0.31 to 0.21 for plywood, mild steel, and rubber, respectively.

Physical Properties of Naked Oat Seeds (Avena nuda L.)

2014 ◽  
Vol 10 (2) ◽  
pp. 339-345 ◽  
Author(s):  
Guang-yue Ren ◽  
Ping Yao ◽  
Nan Fu ◽  
Dong Li ◽  
Yubin Lan ◽  
...  
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Geometric Mean ◽  
Static Friction ◽  
Angle Of Repose ◽  
Naked Oat ◽  
Oat Seeds ◽  
Avena Nuda ◽  
Length Width ◽  
Content Range

Abstract Some physical properties of the naked oat seeds were determined as a function of moisture content ranging from 9.56 to 18.07% (wet basis, w.b.). Seed length, width, thickness, and geometric mean diameter were increased from 7.89 to 8.81 mm, 2.32 to 3.09 mm, 1.85 to 2.77 mm, and 3.24 to 4.22 mm, respectively, with the increase of moisture content. The bulk and true densities of the seed samples were decreased from 682.1 to 533.1 kg/m3 and from 1,280.6 to 1,162.8 kg/m3, respectively. The average static friction coefficients of the seeds on the surfaces of plywood, stainless steel, and polypropylene knitted bags were increased from 0.403 to 0.674, from 0.371 to 0.496, and from 0.562 to 0.765, respectively, when the moisture content of these samples were increased from 9.56 to 18.07% (w.b.). The static angle of repose varied from 24.38° to 39.17° in the moisture content range.

scholarly journals Study on some engineering attributes of pine nut (Pinus pinea) to the design of processing equipment

2010 ◽  
Vol 56 (No. 3) ◽  
pp. 99-106 ◽  
Author(s):  
S.M.T. Gharibzahedi ◽  
V. Etemad ◽  
J. Mirarab-Razi ◽  
M. Fos hat
Keyword(s):  
Moisture Content ◽  
Geometric Mean ◽  
Seed Mass ◽  
Static Friction ◽  
Terminal Velocity ◽  
Angle Of Repose ◽  
Engineering Properties ◽  
Pine Nut ◽  
Length Width ◽  
Glass Surfaces

Moisture-dependent engineering properties of pine nut were studied at 6.3, 8.2, 10.8, 14.5, 18.9, and 20.1% moisture content (dry basis). The length, width, thickness, and geometric mean diameter increased significantly (P < 0.05) from 21.75 to 21.85 mm, 7.39 to 7.47 mm, 6.07 to 6.14 mm, and 9.89 to 9.98 mm, respectively, with an increase in moisture content from 6.3% to 20.1%, whereas the increase in sphericity from 45.49% to 45.69% was not significant. Similarly, thousand seed mass, true density, porosity, terminal velocity, and angle of repose increased (P < 0.05) from 0.85 to 0.93 kg, 1043.3 to 1071 kg/m3, 41.31% to 44.57%, 8.67 to 8.83 m/s, and 35.4° to 39°, respectively, with an increase in moisture content under the experimental condition. Moreover, the bulk density decreased significantly (P < 0.05) from 612.3 to 593.6 kg/m3. Coefficient of static friction increased (P < 0.05) from 0.251 to 0.292, 0.241 to 0.271, 0.227 to 0.262, and 0.218 to 0.247 on plywood, galvanized iron sheet, stainless steel, and glass surfaces, respectively, with an increase in moisture content from 6.3% to 20.1%.

scholarly journals Some Physical Properties of Palmyrah Palm (Borassus flabellifer L.) Fruits

2021 ◽  
pp. 18-25
Author(s):  
P. C. Vengaiah ◽  
S. Kaleemullah ◽  
M. Madhava ◽  
A. Mani ◽  
B. Sreekanth
Keyword(s):  
Aspect Ratio ◽  
Moisture Content ◽  
Mild Steel ◽  
Physical Properties ◽  
Bulk Density ◽  
Geometric Mean ◽  
Static Friction ◽  
Angle Of Repose ◽  
Average Mass ◽  
The Individual

Some physical properties of palmyrah fruit were investigated in this study. The average values of major, medium, minor and geometric mean diameters of fresh whole palmyrah fruit were 11.54,10.45, 9.85 and 10.64 cm respectively at 47.34 % (w.b) moisture content whereas that of palmyrah nut were 8.59, 7.35, 4.99 and 6.79 cm respectively at 8% (w.b) moisture content. Sphericity, surface area and aspect ratio were found to be 91.94%, 359.17 cm2 and 0.90 for fruit and whereas that of nut were 79.19%, 145.16 cm2 and 0.86 respectively. The average mass of the individual palmyrah fruit and nut was 927.78 and 248.10 g whereas bulk density was 525.92 and 693.0 kg/m3 respectively. The coefficient of static friction on mild steel, glass and plywood surfaces were 0.27, 0.21 and 0.25 for palmyrah fruit and 0.36, 0.28 and 0.27 for nut respectively. The angle of repose of palmyrah fruit and nut were 30.77 and 44.03 respectively.

Moisture Dependent Physical Properties of Grape Seeds

2010 ◽  
Vol 6 (5) ◽  
Author(s):  
Jafar Milani ◽  
Ali Moetamedzadegan
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Geometric Mean ◽  
Seed Mass ◽  
Grape Seed ◽  
Angle Of Repose ◽  
Grape Seeds ◽  
Length Width ◽  
Static Coefficient Of Friction ◽  
Static Coefficient

This study was carried out to determine the effect of moisture content on some physical properties of grape seed. Seven levels of moisture content varying from 12.26 to 24.61% (w.b.) were considered in this study. Length, width, thickness, geometric mean diameter, sphericity and 1000 seed mass increased by 2.58%, 3.63%, 8.36%, 4.78%, 2.14%, and 22.62%, respectively, with the increase of moisture content. Bulk and true density increased from 469.3 to 546.3 kg/m3 and 1058.7 to 1159.3 kg/m3, respectively, while porosity decreased from 55.67 to 52.87%. The angle of repose increased from 21.79 to 29.65° with the increase of moisture content. The hardness decreased from 58.72 to 23.34 N with increase in moisture content. The static coefficient of friction of seeds was determined on concrete, galvanized iron, plywood and glass sheets at various moisture contents. The highest and lowest static coefficients of friction were observed on concrete and glass sheet, respectively.

Note: Physical Properties of High Oleic Sunflower Seeds

2003 ◽  
Vol 9 (6) ◽  
pp. 435-442 ◽  
Author(s):  
E. M. Santalla ◽  
R. H. Mascheroni
Keyword(s):  
Moisture Content ◽  
Average Length ◽  
Static Friction ◽  
Terminal Velocity ◽  
Angle Of Repose ◽  
Engineering Properties ◽  
Equivalent Diameter ◽  
Sunflower Seeds ◽  
High Oleic ◽  
Length Width

High oleic sunflower seeds evaluated at 5.6% moisture content (dry basis) showed a surface area of approximately 102.41 mm2 with an average length, width, thickness and unit mass of 11.526, 5.008 and 2.809 mm and 0.055 g, respectively. Corresponding values for the kernel were 8.802, 3.897 and 1.907 mm and 0.036 g. The mean equivalent diameter and sphericity of the seeds were 5.49 mm and 0.46, respectively, while corresponding values for the kernels were 4.01 mm and 0.44. True density increased, within a moisture range of 4-26% d.b., between 652 and 708 kg/m3 for the seed, between 1015 and 1057 kg/m3 for the kernel and between 636 and 760 kg/m3 for the hull. The bulk density decreased from 386 to 373 kg/m3 for seeds and from 260 to 220 kg/m3 for hulls and increased from 535 to 553 kg/m3 for the kernels. Porosity increased from 41.2 to 47.1% in seeds, from 47.2 to 47.7% in kernels and from 59.2 to 70.1% in hull. Terminal velocity of seeds increased with moisture content between 2.8 and 5.5 m/s for seed, between 1.8 and 3.8 m/s for kernel and between 1.1 and 1.9 m/s for hull. Drag coefficient decreased when moisture content increased and varied between 4.7 and 1.4 in seed and between 12.5 and 3.1 in kernel. Angle of repose increased with moisture content between 25 and 46 in seeds, between 35 and 55 in kernels and between 49 and 66 in hull on different surfaces and resulted higher for hull and kernel than for seed. The coefficient of static friction was higher for kernel than that for seed and hull and also was higher on wood (with grain perpendicular to the direction of the motion) and lower on acrylic and galvanised iron. This coefficient increased with moisture content from 0.23 to 0.50 for seed, from 0.37 to 0.69 for kernel and from 0.31 to 0.60 for hull. All engineering properties evaluated showed a linear dependence with moisture content, leading to simple and accurate formulae, adequate to predict their variation in the range of moisture considered.

Effect of Moisture Content on the Physical Properties of Fibered Flaxseed

2007 ◽  
Vol 3 (5) ◽  
Author(s):  
Bo Wang ◽  
Dong Li ◽  
Li-jun Wang ◽  
Zhi-gang Huang ◽  
Lu Zhang ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Moisture Content ◽  
Physical Properties ◽  
Coefficient Of Friction ◽  
Geometric Mean ◽  
Angle Of Repose ◽  
Stainless Steel Surface ◽  
Static Coefficient Of Friction ◽  
Content Range ◽  
Static Coefficient

The physical properties of fibered flaxseed were investigated within moisture content varying from 6.21 to 16.29%. The length, width, thickness and geometric mean diameter increased from 4.20 to 4.44mm, 1.99 to 2.13mm, 0.91 to 0.95mm, and 1.95 to 2.06mm, respectively in the moisture content range. One thousand seed weight increased linearly from 4.22 to 4.62g. The bulk density decreased from 726.783 to 611.872kg/m3, while the true density increased from 1165.265 to 1289.341kg/m3 in the moisture content range. The porosity values of flaxseed increased linearly from 37.67 to 52.54%. The highest static coefficient of friction was found on the plywood surface, while the lowest on the stainless steel surface. The static coefficient of friction increased from 0.467 to 0.972, 0.442 to 0.864, 0.492 to 0.927, and 0.490 to 0.845 for plywood, stainless steel, aluminum sheet and galvanized iron, respectively. The angle of repose increased linearly from 25.7° to 33.8° in the moisture content range. The results are necessary for design of equipment to handling, transportation, processing, and the storage of flaxseed.

Physical properties of coriander seeds at different moisture content

2012 ◽  
Vol 26 (4) ◽  
pp. 419-422 ◽  
Author(s):  
S. Balasubramanian ◽  
K.K. Singh ◽  
R. Kumar
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Unit Volume ◽  
Geometric Mean ◽  
Static Friction ◽  
Major Axis ◽  
Angle Of Repose ◽  
Rupture Force ◽  
True Density ◽  
Seed Moisture

Abstract Physical properties of coriander seeds were determined at moisture content of 3.5-17.7%, d.b. The major axis and 1 000 seeds mass were found to decrease nonlinearly with increase in seed moisture. The medium and minor axes, geometric mean diameter, sphericity, unit volume, surface area and angle of repose increased linearly. Bulk density decreased linearly, however the true density increased non-linearly. The coefficient of static friction increased nonlinearly for different surfaces with increase in moisture level and its maximum was found for plywood surface. The rupture force and energy absorbed decreased linearly with increasing moisture content.

scholarly journals DETERMINATION OF PHYSICAL AND ENGINEERING PROPERTIES OF TIGER NUT (Cyperus esculentus) RELEVANT TO ITS MECHANIZATION

2020 ◽  
Vol 5 (8) ◽  
Author(s):  
Tega A Emurigho ◽  
Canice O.O Kabuo ◽  
Arinze N Ifegbo
Keyword(s):  
Moisture Content ◽  
Static Friction ◽  
Major Axis ◽  
Angle Of Repose ◽  
Engineering Properties ◽  
Cyperus Esculentus ◽  
Mean Values ◽  
Principal Axes ◽  
Length Width ◽  
The Mean

The physical and engineering properties of fresh and dried tiger nut (Cyperus esculentus) were determined at moisture content of 41.20% and 16.40% on wet basis respectively. The mean values for the three principal axes (length, width and thickness) were 9.52mm, 8.16mm, and 8.16mm for fresh tiger nut and 9.14mm, 7.72mm and 8.03mm for dried tiger nut respectively, showing a decrease with decrease in moisture content and was significantly different at p?0.05. The mean values of the bulk density, true density and porosity of both fresh and dried tiger nut were 0.59g/cm3 , 0.97g/cm3 , 40.61 and 0.58g/cm3, 0.94g/cm3 , 40.35 respectively and were not significantly different at p?0.05. The mean angle of repose and coefficient of static friction over formica, stainless steel, glass and plywood surfaces of fresh tiger nut were 50.11o , 2.73, 2.45, 2.22 and 1.77 while that of dried tiger nut were 48.23o , 2.41, 2.03, 2.11 and 2.00 respectively. The mean rupture force increased with compression force of 90.08N on the major axis to 116.88N for fresh tiger nut and from 120.55N to 161.10N for dried tiger nut and were significantly different at p?0.05. These properties determined are necessary in the design and fabrication of hoppers, conveyor equipment and the force tiger nut can withstand before it is ruptured.

scholarly journals Effect of Moisture Content on Selected Physical and Mechanical Properties of Two Varieties of Tigernut (Cyperus spp)

2013 ◽  
Vol 2 (6) ◽  
pp. 24
Author(s):  
A. S. Oyerinde ◽  
A. P. Olalusi
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Bulk Density ◽  
Average Length ◽  
Physical And Mechanical Properties ◽  
Static Friction ◽  
Angle Of Repose ◽  
Tuber Weight ◽  
Porosity Coefficient ◽  
Effect Of Moisture

<p>The effect of moisture content on some physical and mechanical properties of two varieties of tigernuts (<em>Cyperus esculentus</em>) was investigated. These properties include: geometric dimensions, linear dimensions, 1000 tuber weight, bulk density, tuber size, sphericity, angle of repose, porosity, coefficient of static friction and compressive strength. The moisture content levels used were 20, 25, 30, 35 and 40% wet basis (wb), and the two tigernut varieties used were yellow and brown types. The linear dimension, geometric diameter, sphericity, 1000- tuber weight, bulk density and angle of repose in both varieties increased with increasing moisture content. The average length, width and thickness of the yellow variety increases more than the brown variety at the determined moisture contents. True density of the yellow variety increased while the brown variety decreased with increase in moisture content. The porosity of the yellow variety reduces with increase in moisture content from 45.95 at 20% mc to 42.4 at 40% mc, while the brown variety decreased from 42.72 at 20% mc to 30.77 at 40% moisture content. The yellow variety had bigger size tubers than the brown variety and this has serious implications in packing, handling and transportation issues.</p>

scholarly journals Evaluation and Modeling Some Engineering Properties of Three Safflower Varieties

2015 ◽  
Vol 47 (4) ◽  
pp. 23-40
Author(s):  
F. Shahbazi
Keyword(s):  
Moisture Content ◽  
Geometric Mean ◽  
Static Friction ◽  
Terminal Velocity ◽  
Galvanized Steel ◽  
Angle Of Repose ◽  
Engineering Properties ◽  
Seed Moisture Content ◽  
Seed Moisture ◽  
Static Coefficient Of Friction

Abstract Several physical properties of three safflower cultivars (IL-111, LRV51-51 and Zarghan279) at moisture contents of 10, 15, 20 and 25% were determined and compared. All the linear dimensions, geometric mean diameter and sphericity of safflower seeds increase linearly with increase in seed moisture content. The values of geometric properties were higher for IL-111cultivar than the LRV51-51 and Zarghan279 cultivars. The values of the bulk densities decreased, whereas the thousand seeds mass, true density and porosity were increased with increase in seed moisture content. All the gravimetric properties for the three cultivars of safflower were significantly different (p<0.05). The values of the terminal velocity for all cultivars were significantly increased as the moisture content increased. The terminal velocity for the three cultivars of safflower were significantly different (p<0.05). On the two different surfaces, the coefficient of static friction of the IL-111 cultivar was significantly greater than that of the other cultivars. The static coefficient of friction was higher on plywood and lower for galvanized steel. The values of the angle of repose increased with increase of the moisture content. The values of the angle of repose for Zarghan279 cultivar were higher than the IL-111, LRV51-51 cultivars.

Sign in / Sign up

Export Citation Format

Share Document