Characteristics Analysis of the Winter Precipitation by the Installation Environment for the Weighing Precipitation Gauge in Gochang

2021 ◽  
Vol 42 (5) ◽  
pp. 514-523
Author(s):  
Byeong Taek Kim ◽  
Sung Eun Hwang ◽  
Young Tae Lee ◽  
Seung Sook Shin ◽  
Ki Hoon Kim
2014 ◽  
Vol 11 (9) ◽  
pp. 10043-10084 ◽  
Author(s):  
M. A. Wolff ◽  
K. Isaksen ◽  
A. Petersen-Øverleir ◽  
K. Ødemark ◽  
T. Reitan ◽  
...  

Abstract. Precipitation measurements exhibit large cold-season biases due to under-catch in windy conditions. These uncertainties affect water balance calculations, snowpack monitoring and calibrations of remote sensing algorithms and land surface models. More accurate data would improve the ability to predict future changes in water resources and mountain hazards in snow-dominated regions. In 2010, an extensive test-site for precipitation measurements was established at a mountain plateau in Southern Norway. Precipitation data of automatic gauges were compared with a precipitation gauge in a Double Fence Intercomparison Reference (DFIR) wind shield construction which served as the reference. Additionally, a large number of sensors were monitoring supportive meteorological parameters. In this paper, data from three winters were used to study and determine the wind-induced under-catch of solid precipitation. Qualitative analyses and Bayesian statistics were used to evaluate and objectively choose the model that is describing the data best. A continuous adjustment function and its uncertainty were derived for measurements of all types of winter precipitation (from rain to dry snow). A regression analysis did not reveal any significant misspecifications for the adjustment function, but showed that the chosen model uncertainty is slightly insufficient and can be further optimized. The adjustment function is operationally usable based only on data available at standard automatic weather stations. Our results show a non-linear relationship between under-catch and wind speed during winter precipitation events and there is a clear temperature dependency, mainly reflecting the precipitation type. The results allowed for the first time to derive an adjustment function with a data-tested validity beyond 7 m s−1 and proved a stabilisation of the wind-induced precipitation loss for higher wind speeds.


2015 ◽  
Vol 16 (6) ◽  
pp. 2345-2363 ◽  
Author(s):  
Steven M. Martinaitis ◽  
Stephen B. Cocks ◽  
Youcun Qi ◽  
Brian T. Kaney ◽  
Jian Zhang ◽  
...  

Abstract Precipitation gauge observations are routinely classified as ground truth and are utilized in the verification and calibration of radar-derived quantitative precipitation estimation (QPE). This study quantifies the challenges of utilizing automated hourly gauge networks to measure winter precipitation within the real-time Multi-Radar Multi-Sensor (MRMS) system from 1 October 2013 to 1 April 2014. Gauge observations were compared against gridded radar-derived QPE over the entire MRMS domain. Gauges that reported no precipitation were classified as potentially stuck in the MRMS system if collocated hourly QPE values indicated nonzero precipitation. The average number of potentially stuck gauge observations per hour doubled in environments defined by below-freezing surface wet-bulb temperatures, while the average number of observations when both the gauge and QPE reported precipitation decreased by 77%. Periods of significant winter precipitation impacts resulted in over a thousand stuck gauge observations, or over 10%–18% of all gauge observations across the MRMS domain, per hour. Partial winter impacts were observed prior to the gauges becoming stuck. Simultaneous postevent thaw and precipitation resulted in unreliable gauge values, which can introduce inaccurate bias correction factors when calibrating radar-derived QPE. The authors then describe a methodology to quality control (QC) gauge observations compromised by winter precipitation based on these results. A comparison of two gauge instrumentation types within the National Weather Service (NWS) Automated Surface Observing System (ASOS) network highlights the need for improved gauge instrumentation for more accurate liquid-equivalent values of winter precipitation.


2015 ◽  
Vol 19 (2) ◽  
pp. 951-967 ◽  
Author(s):  
M. A. Wolff ◽  
K. Isaksen ◽  
A. Petersen-Øverleir ◽  
K. Ødemark ◽  
T. Reitan ◽  
...  

Abstract. Precipitation measurements exhibit large cold-season biases due to under-catch in windy conditions. These uncertainties affect water balance calculations, snowpack monitoring and calibration of remote sensing algorithms and land surface models. More accurate data would improve the ability to predict future changes in water resources and mountain hazards in snow-dominated regions. In 2010, a comprehensive test site for precipitation measurements was established on a mountain plateau in southern Norway. Automatic precipitation gauge data are compared with data from a precipitation gauge in a Double Fence Intercomparison Reference (DFIR) wind shield construction which serves as the reference. A large number of other sensors are provided supporting data for relevant meteorological parameters. In this paper, data from three winters are used to study and determine the wind-induced under-catch of solid precipitation. Qualitative analyses and Bayesian statistics are used to evaluate and objectively choose the model that best describes the data. A continuous adjustment function and its uncertainty are derived for measurements of all types of winter precipitation (from rain to dry snow). A regression analysis does not reveal any significant misspecifications for the adjustment function, but shows that the chosen model does not describe the regression noise optimally. The adjustment function is operationally usable because it is based only on data available at standard automatic weather stations. The results show a non-linear relationship between under-catch and wind speed during winter precipitation events and there is a clear temperature dependency, mainly reflecting the precipitation type. The results allow, for the first time, derivation of an adjustment function based on measurements above 7 m s−1. This extended validity of the adjustment function shows a stabilization of the wind-induced precipitation loss for higher wind speeds.


1993 ◽  
Vol 18 ◽  
pp. 211-214
Author(s):  
Thomas Wiesinger ◽  
Shinichi Takami ◽  
Hiroyuki Ohno ◽  
Kotaro Yokoyama

A high-precision, self-operating storage precipitation gauge was designed and field-tested. It consists of a cylinder-shaped container that incorporates antifreeze solution to melt snow and a quartz-crystal pressure sensor to detect mass of the contained liquid. Field trials showed performance to be at least equivalent to the Japanese standard gauge. A novel feature of the developed instrument is that it also measures a parameter related to wind speed, which is the basis for a catch correction. The instrument is simple, robust and can be battery-operated, therefore making it useful for winter precipitation measurements at sites where electric power supply is unavailable.


2012 ◽  
Vol 16 (11) ◽  
pp. 4157-4176 ◽  
Author(s):  
S. Stisen ◽  
A. L. Højberg ◽  
L. Troldborg ◽  
J. C. Refsgaard ◽  
B. S. B. Christensen ◽  
...  

Abstract. Precipitation gauge catch correction is often given very little attention in hydrological modelling compared to model parameter calibration. This is critical because significant precipitation biases often make the calibration exercise pointless, especially when supposedly physically-based models are in play. This study addresses the general importance of appropriate precipitation catch correction through a detailed modelling exercise. An existing precipitation gauge catch correction method addressing solid and liquid precipitation is applied, both as national mean monthly correction factors based on a historic 30 yr record and as gridded daily correction factors based on local daily observations of wind speed and temperature. The two methods, named the historic mean monthly (HMM) and the time–space variable (TSV) correction, resulted in different winter precipitation rates for the period 1990–2010. The resulting precipitation datasets were evaluated through the comprehensive Danish National Water Resources model (DK-Model), revealing major differences in both model performance and optimised model parameter sets. Simulated stream discharge is improved significantly when introducing the TSV correction, whereas the simulated hydraulic heads and multi-annual water balances performed similarly due to recalibration adjusting model parameters to compensate for input biases. The resulting optimised model parameters are much more physically plausible for the model based on the TSV correction of precipitation. A proxy-basin test where calibrated DK-Model parameters were transferred to another region without site specific calibration showed better performance for parameter values based on the TSV correction. Similarly, the performances of the TSV correction method were superior when considering two single years with a much dryer and a much wetter winter, respectively, as compared to the winters in the calibration period (differential split-sample tests). We conclude that TSV precipitation correction should be carried out for studies requiring a sound dynamic description of hydrological processes, and it is of particular importance when using hydrological models to make predictions for future climates when the snow/rain composition will differ from the past climate. This conclusion is expected to be applicable for mid to high latitudes, especially in coastal climates where winter precipitation types (solid/liquid) fluctuate significantly, causing climatological mean correction factors to be inadequate.


1993 ◽  
Vol 18 ◽  
pp. 211-214
Author(s):  
Thomas Wiesinger ◽  
Shinichi Takami ◽  
Hiroyuki Ohno ◽  
Kotaro Yokoyama

A high-precision, self-operating storage precipitation gauge was designed and field-tested. It consists of a cylinder-shaped container that incorporates antifreeze solution to melt snow and a quartz-crystal pressure sensor to detect mass of the contained liquid. Field trials showed performance to be at least equivalent to the Japanese standard gauge. A novel feature of the developed instrument is that it also measures a parameter related to wind speed, which is the basis for a catch correction. The instrument is simple, robust and can be battery-operated, therefore making it useful for winter precipitation measurements at sites where electric power supply is unavailable.


2008 ◽  
Vol 128 (11) ◽  
pp. 435-441
Author(s):  
Seung-ho Yang ◽  
Katsuhiro Hirata ◽  
Tomohiro Ota ◽  
Yoshio Mitsutake ◽  
Yoshihiro Kawase

Sign in / Sign up

Export Citation Format

Share Document