scholarly journals Developing improved tissue-engineered buccal mucosa grafts for urethral reconstruction

2018 ◽  
Vol 12 (5) ◽  
pp. E234-42
Author(s):  
Abdulmuttalip Simsek ◽  
Anthony J. Bullock ◽  
Sabi Roman ◽  
Chirstoper R. Chapple ◽  
Sheila MacNeil

Introduction: We aimed to compare alternative synthetic scaffolds suitable for future implantation and to examine the use of an inhibitor of lysyl oxidase (beta-amino-propionitrile [β-APN]) to reduce contraction in these implants.Methods: Three synthetic scaffolds were compared to natural dermis as substrates for the production of tissue-engineered skin. For natural dermis, Euroskin was used to provide a cell-free cadaveric dermis. Synthetic scaffolds consisted of microfibrous poly-L-lactic acid (PLA), nanofibrous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), and a micro-/nanofibrous trilayer of PLA-PHBV-PLA. The latter were all electrospun and then all four scaffolds (three synthetic, one natural) were placed in six well plates. A culture well was formed on the scaffold using a 1 cm diameter stainless steel ring and 1.5x105 oral fibroblasts were seeded one side; after two days of culture, the ring was placed on the other side of the scaffolds and 3x105 oral keratinocytes were seeded on to the scaffolds and cultured with keratinocytes uppermost. After a further two days of culture, scaffolds were cut to 1 cm2 and raised to an air-liquid interface on stainless steel grids; some were treated with 200 μg/ mL β-APN throughout the culture period (28 days). Contraction in vitro was assessed by serial digital photography of cell-seeded scaffolds and cell-free scaffolds three times a week for 28 days. All cell-seeded scaffolds were assessed for cell metabolic activity, mechanical properties, histology, and morphology by scanning electron microscopy (SEM).Results: The mean fibre diameters and pore sizes of PLA and PHBV scaffolds were 2.4±0.77, 0.85±0.21 μm (p<0.001), and 10.8±2.3, 4.3±1.1 μm (p<0.001), respectively. Oral fibroblasts and keratinocytes were tightly adhered and grew well on both surfaces of trilayer. The ultimate tensile strength (UTS) and Young’s modulus (YM) of PLA samples were significantly lower than Euroskin (p<0.001 and p<0.05, respectively); only the UTS of the trilayer samples was slightly significantly lower (p<0.05). Metabolic activity was significantly increased for cells on all scaffolds, without significant differences between them from Day 0 to Day 28. There were no adverse effects of β-APN on cell viability. With respect to contraction, cells on trilayer and PHBV monolayers did not undergo any significant contraction; however, cells on PLA monolayer and Euroskin contracted 25.3% and 56.4%, respectively, over 28 days. The addition of 200 μg/ml β-APN significantly reduced contraction of Euroskin compared with the control (p<0.01); however, β-APN did not affect PLA contraction during this culture period (p>0.05).Conclusions: This study shows that a trilayer micro-nano-3D porous synthetic scaffold is suitable for oral keratinocyte and fibroblast growth with good cell viability and minimal contraction. This material also has good mechanical properties and histological analyses showed its ability to mimic normal human oral mucosal morphology. Furthermore, synthetic trilayer scaffolds have advantages over biological scaffolds — there is no risk of disease transmission or immunological rejection and they appear resistant to contraction. We suggest they present a good alternative to allodermis for future use in urethral reconstruction.

2012 ◽  
Vol 38 (4) ◽  
pp. 418-423 ◽  
Author(s):  
E. McDonald ◽  
J. A. Gordon ◽  
J. M. Buckley ◽  
L. Gordon

Our goal was to investigate and compare the mechanical properties of multifilament stainless steel suture (MFSS) and polyethylene multi-filament core FiberWire in flexor tendon repairs. Flexor digitorum profundus tendons were repaired in human cadaver hands with either a 4-strand cruciate cross-lock repair or 6-strand modified Savage repair using 4-0 and 3-0 multifilament stainless steel or FiberWire. The multifilament stainless steel repairs were as strong as those performed with FiberWire in terms of ultimate load and load at 2 mm gap. This study suggests that MFSS provides as strong a repair as FiberWire. The mode of failure of the MFSS occurred by the suture pulling through the tendon, which suggests an advantage in terms of suture strength.


2018 ◽  
Vol 9 ◽  
pp. 71
Author(s):  
Tjokro Prasetyadi ◽  
Bambang Irawan ◽  
Miesje Karmiati Purwanegara ◽  
Bambang Suharno ◽  
Sugeng Supriadi

Objective: 17-4 precipitation hardening (PH) stainless steel has a low nickel content, which can reduce the risk of allergic reactions. It also has good mechanical properties against the stress caused by the archwire slot brackets in orthodontic treatments. The main focus of this study to evaluate the metal ions released into artificial saliva from different orthodontic brackets with the same 17-4 PH stainless steel and to examine the in vitro cytotoxicity of the metal.Methods: Material properties were analyzed by energy dispersive spectroscopy. The 3-(4,5-dimethylthiazol-2-y1)2,5-diphenyltetrazolium bromide (MTT) assay method was used to examine the cytotoxicity of Gemini and Synergy brackets.Results: The cytotoxicity test on all the orthodontic brackets showed a mean cell viability value above 80% in each immersion group, which means that this material is not cytotoxic to the human immortalized keratinocyte cell line.Conclusions: The results showed cell viability in the extracts of both groups of brackets, and there was no statistically significant difference between the groups (p>0.05).


2019 ◽  
Vol 7 (23) ◽  
pp. 4120-4126
Author(s):  
Zhaleh Bamdadian ◽  
Nilgoon Pasdar ◽  
Abdolhamid Alhavaz ◽  
Shahram Ghasemi ◽  
Ali Bijani

BACKGROUND: There is some cases of perforation and undesirable properties of some primary molars stainless steel crowns. AIM: The aim of this study was to compare the physical and mechanical properties of different commercial brands of these crowns. METHODS: In an in vitro study, a total of 10 stainless steel tooth crowns of the second primary mandibular molars size 6 of 4 different commercial brands (a total of 280 crowns) were evaluated. These crowns were included KTR Pre-trimmed and Crimped Nichro Stainless Steel Primary Molar Crowns (KTR, China); 3M Stainless Steel Primary Molar Crowns (ESPE, St paul; USA); NuSmile SSC Pre-contoured (Inc, Houstone, TX; USA) and Kids crown (Shinghung, Seoul; Korea). Corrosion and galvanic corrosion, wear, microhardness, compressive strength, fatigue strength of crowns and weight percent of elements were investigated. RESULTS: The highest rate of microhardness, compressive and Fatigue strength of the crowns were made by Nu Smile > 3M > Kids Crown > KTR respectively. The highest rate of corrosion potential in corrosion and Galvanic corrosion tests was in KTR > Kids crowns > 3M > Nu smile respectively. The order of crown wear was KTR > Kids Crown > 3M > Nu Smile respectively. The highest amount of nickel element was found in the Nu Smile crown and the highest amount of chrome in the 3M crown with a significant difference with others (p < 0.001). The KTR and Kids crowns lacked molybdenum. CONCLUSION: The results showed that Nu Smile crown has better physical and mechanical properties than other evaluated crowns in this study.


PLoS ONE ◽  
2013 ◽  
Vol 8 (4) ◽  
pp. e61633 ◽  
Author(s):  
Erfan Salahinejad ◽  
Mohammad Jafar Hadianfard ◽  
Digby Donald Macdonald ◽  
Samin Sharifi-Asl ◽  
Masoud Mozafari ◽  
...  

2020 ◽  
Vol 127 (Suppl_1) ◽  
Author(s):  
Emily Mulvany ◽  
Sara McMahan ◽  
Jiazhu Xu ◽  
Narges Yazdani ◽  
Rebecca Willits ◽  
...  

Introduction: Cardiac extracellular matrix (cECM) hydrogel has been explored to treat myocardial infarction (MI). It possesses organ specific microenvironmental cues for resident cells and can be minimally invasive delivered into the heart using a transendocardial catheter. Recent clinical studies demonstrated the safety and feasibility of using cECM for treating MI patients. However, little is known about whether the region of cardiac tissue harvesting is critical for downstream applications. We performed in vitro studies to compare cECM hydrogels derived from porcine whole heart (WH), left ventricle (LV), and right ventricle (RV). Materials and Methods: Adult porcine hearts were obtained from a local USDA approved abattoir. The tissues were separated into 3 major categories: LV, RV, and WH tissues. Following our published protocol, tissues were decellularized and solubilized. The complete decellularization was confirmed by H&E staining and DNA content measurement. Chemical composition was examined using SDS-PAGE electrophoresis as well as Collagen and GAGs measurements. The gelation time, SEM (hydrogel microstructures), and mechanical properties (storage and complex modulus) were studied. Human cardiomyocytes (CMs) and mesenchymal stem cells (MSCs) were separately seeded on the hydrogels to examine their responses. Cell viability and vascular differentiation of human MSCs were examined. Results and Discussion: The cECM from WH has more complex chemical composition compared with cECM from LV and RV. All three types of cECM hydrogels share many similarities in terms of their microstructure, gelation time and mechanical properties. WH-derived cECM hydrogels have larger variations in storage modulus (G’) and complex modulus (G*) compared with the other two types of cECM hydrogels. Both human CMs and MSCs could maintain high cell viability on all hydrogels. Regardless of harvesting sites, all cECM hydrogels have equivalent potency in directing vascular differentiation of seeded human MSCs. Conclusions: The cECM hydrogels from WH, LV and RV exhibited similarity in material properties and cell response in vitro . Future fabrication of cECM hydrogels from WH would increase the yield and decrease production cost.


Plants ◽  
2021 ◽  
Vol 10 (9) ◽  
pp. 1936
Author(s):  
Akeem O. Akinfenwa ◽  
Naeem S. Abdul ◽  
Jeanine L. Marnewick ◽  
Ahmed A. Hussein

Skin cells suffer continuous damage from chronic exposure to ultraviolet light (UV) that may result in UV-induced oxidative stress and skin thinning. This has necessitated the formulation of cosmeceutical products rich in natural antioxidants and free radical scavengers. Aspalathus linearis (rooibos) is an endemic South African fynbos plant growing naturally in the Western Cape region. The plant is rich in phenolics and other bioactives with a wide spectrum of health benefits. The chemical study of an acetonic extract of green A. linearis afforded a novel compound named linearthin (1) and two known dihydrochalcones, aspalathin (2) and nothofagin (3). The chemical structure of the novel compound was elucidated based on spectroscopic data analysis. The bio-evaluation of the isolated chalcones in vitro for protection against UVB-induced oxidative stress were systematically assessed by examining cell viability, metabolic activity, apoptosis, and cytotoxicity using HaCaT and SK-MEL-1 skin cells models. It was observed that pre-treatment with tested samples for 4- and 24 h at low concentrations were sufficient to protect skin cells from UVB-induced damage in vitro as evidenced by higher cell viability and improved metabolic activity in both keratinocytes (HaCaT) and melanocytes (SK-MEL-1). The results further show that the pre-treatment regimen employed by this study involved some degree of cellular adaptation as evidenced by higher levels of reduced glutathione with a concomitant decrease in lipid peroxidation and lowered caspase 3 activity. Furthermore, compound 1 was most cytoprotective against UVB irradiation of HaCaT cell line (over 24 h) with an IC50 of 282 µg/mL and SK-MEL-1 cell line with IC50 values of 248.3 and 142.6 µg/mL over 4 and 24 h, respectively. On the other hand, HaCaT cells exposed to 2 over 4 h before UVB irradiation showed the highest degree of cytoprotection with an IC50 of 398.9 µg/mL among the four studied samples. These results show that linearthin (1) and the two glycoside dihydrochalcone of A. linearis have the potential to be further developed as antioxidant cosmeceutical ingredients that may protect skin against UVB-induced damage.


2021 ◽  
Vol 8 (8) ◽  
pp. 116
Author(s):  
Lumei Liu ◽  
Sayali Dharmadhikari ◽  
Robert A. Pouliot ◽  
Michael M. Li ◽  
Peter M. Minneci ◽  
...  

Synthetic scaffolds for the repair of long-segment tracheal defects are hindered by insufficient biocompatibility and poor graft epithelialization. In this study, we determined if extracellular matrix (ECM) coatings improved the biocompatibility and epithelialization of synthetic tracheal grafts (syn-TG). Porcine and human ECM substrates (pECM and hECM) were created through the decellularization and lyophilization of lung tissue. Four concentrations of pECM and hECM coatings on syn-TG were characterized for their effects on scaffold morphologies and on in vitro cell viability and growth. Uncoated and ECM-coated syn-TG were subsequently evaluated in vivo through the orthotopic implantation of segmental grafts or patches. These studies demonstrated that ECM coatings were not cytotoxic and, enhanced the in vitro cell viability and growth on syn-TG in a dose-dependent manner. Mass spectrometry demonstrated that fibrillin, collagen, laminin, and nephronectin were the predominant ECM components transferred onto scaffolds. The in vivo results exhibited similar robust epithelialization of uncoated and coated syn-TG patches; however, the epithelialization remained poor with either uncoated or coated scaffolds in the segmental replacement models. Overall, these findings demonstrated that ECM coatings improve the seeded cell biocompatibility of synthetic scaffolds in vitro; however, they do not improve graft epithelialization in vivo.


Sign in / Sign up

Export Citation Format

Share Document