Time-Gradient Nitric Acid Modification of CF Biofilm-Carrier and Surface Nature Effects on Microorganism Immobilization Behavior in Wastewater

2013 ◽  
Vol 27 (4) ◽  
pp. 3918-3922 ◽  
Author(s):  
Yanling Bao ◽  
Guangze Dai
Keyword(s):  
Nitric Acid ◽  
Acid Modification ◽  
Biofilm Carrier ◽  
Microorganism Immobilization ◽  
Surface Nature

Effect of Nitric Acid Modification on LiMn2O4 Prepared by Solution Combustion Synthesis

2011 ◽  
Vol 80-81 ◽  
pp. 332-336 ◽  
Author(s):  
Yan Xia ◽  
Mei Huang ◽  
Jun Ming Guo ◽  
Ying Jie Zhang
Keyword(s):  
Nitric Acid ◽  
Combustion Synthesis ◽  
Discharge Capacity ◽  
Retention Rate ◽  
Solution Combustion Synthesis ◽  
Manganese Acetate ◽  
Solution Combustion ◽  
Acid Modification ◽  
Capacity Retention ◽  
Liquid Combustion

Effect of nitric acid and the burning time on the liquid combustion synthesis of spinel LiMn2O4 has been studied, using lithium nitrite and Manganese acetate as raw a material. The results show that the main phases are all LiMn2O4, which can be obtained at 400-600 oC. Before modified, the impurity is Mn3O4 or Mn2O3. After modified, the impurity is only Mn3O4. The aggregation obviously reduced after adding nitric acid, it is indicated that the crystalline increased. With the increasing temperatures, the modified particle size was increased and the aggregation reduced. The initial discharge capacity and cycle stability improved at some extent too. Its first discharge capacity was 104.6, 112.8 and 117.7mAh/g synthesized at 400, 500, 600 oC, respectively, and the 30th capacity retention rate were 84.89%, 80.67% and 73.24%.

Effect of nitric acid modification on porous characteristics of mesoporous char synthesized from the pyrolysis of used cigarette filters

2014 ◽  
Vol 2 (3) ◽  
pp. 1301-1308 ◽  
Author(s):  
Salman Masoudi Soltani ◽  
Sara K. Yazdi ◽  
Soraya Hosseini ◽  
Mandis Khayati Gargari
Keyword(s):  
Nitric Acid ◽  
Acid Modification

scholarly journals Effect of Nitric Acid Modification on Characteristics and Adsorption Properties of Lignite

Processes ◽  
2019 ◽  
Vol 7 (3) ◽  
pp. 167 ◽  
Author(s):  
Bo Huang ◽  
Guowei Liu ◽  
Penghui Wang ◽  
Xiang Zhao ◽  
Hongxiang Xu
Keyword(s):  
Nitric Acid ◽  
Surface Chemistry ◽  
Pore Structure ◽  
Surface Properties ◽  
Photoelectron Spectroscopy ◽  
Metal Ion ◽  
Adsorption Properties ◽  
Acid Modification ◽  
X Ray ◽  
Adsorption Performance

The objective of this research was to explore the changes of the pore structure and surface properties of nitric-modified lignite and base the adsorption performance on physical and chemical adsorbent characteristics. To systematically evaluate pore structure and surface chemistry effects, several lignite samples were treated with different concentrations of nitric acid in order to get different pore structure and surface chemistry adsorbent levels. A common heavy metal ion contaminant in water, Pb2+, served as an adsorbate probe to demonstrate the change of modified lignite adsorption properties. The pore structure and surface properties of lignite samples before and after modification were characterized by static nitrogen adsorption, X-ray diffraction, Scanning electron microscope, Fourier transform infrared spectroscopy, zeta potential, and X-ray photoelectron spectroscopy. The experimental results showed that nitric acid modification can increase the ability of lignite to adsorb Pb2+. The adsorption amount of Pb2+ increased from 14.45 mg·g−1 to 30.68 mg·g−1. Nitric acid reacted with inorganic mineral impurities such as iron dolomite in lignite and organic components in coal, which caused an increase in pore size and a decrease in specific surface areas. A hydrophilic adsorbent surface more effectively removed Pb2+ from aqueous solution. Nitric acid treatment increased the content of polar oxygen-containing functional groups such as hydroxyl, carbonyl, and carboxyl groups on the surface of lignite. Treatment introduced nitro groups, which enhanced the negative electrical properties, the polarity of the lignite surface, and its metal ion adsorption performance, a result that can be explained by enhanced water adsorption on hydrophilic surfaces.

Characteristics of Activated Carbon Modified with Nitric Acid and its Performance in Catalytic Ozonation of Acid Red 3R

2013 ◽  
Vol 726-731 ◽  
pp. 1687-1690
Author(s):  
Jing Zhang ◽  
Jian Song Liu ◽  
Chun Liu ◽  
Jing Liang Yang ◽  
Lei Zhang
Keyword(s):  
Activated Carbon ◽  
Nitric Acid ◽  
Adsorption Capacity ◽  
Functional Groups ◽  
Chemical Properties ◽  
Catalytic Ozonation ◽  
Alkaline Condition ◽  
Ozone Decomposition ◽  
Acid Modification ◽  
Modified Activated Carbon

The structure and surface chemical properties of activated carbon after nitric acid modification and their influences on adsorption and catalytic ozonation of acid red 3R were investigated. The results showed that both specific surface area and micropore volume of activated carbon decreased, but mesopore volume increased after nitric acid modification. The adsorption capacity and catalytic ozonation performance of modified activated carbon were influenced due to the increased surface acidic functional groups. The adsorption capacity of modified activated carbon was enhanced under acidic condition due to dispersion interaction between increased surface acidic functional groups and acid red 3R. The increase in surface acidic functional groups of activated carbon was also considered to be responsible for improvement of the catalytic ozonation of acid red 3R under alkaline condition, because of their participation in the ozone decomposition and OH generation.

Effect of nitric acid modification of montmorillonite clay on synthesis of solketal from glycerol and acetone

2017 ◽  
Vol 90 ◽  
pp. 65-69 ◽  
Author(s):  
Maria N. Timofeeva ◽  
Valentina N. Panchenko ◽  
Victoria V. Krupskaya ◽  
Antonio Gil ◽  
Miguel A. Vicente
Keyword(s):  
Nitric Acid ◽  
Montmorillonite Clay ◽  
Acid Modification

Synergistic Effect of Nitric Acid Modified and Cu(II)-Loaded Activated Carbon on Catalytic Ozonation

2014 ◽  
Vol 1073-1076 ◽  
pp. 708-711
Author(s):  
Jing Zhang ◽  
Ya Wei Du ◽  
Xiao Jing Liu ◽  
Yu Wen Zhou ◽  
Chun Liu ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Activated Carbon ◽  
Nitric Acid ◽  
Synergistic Effect ◽  
Functional Groups ◽  
Catalytic Ozonation ◽  
Reusable Catalyst ◽  
Surface Functional Groups ◽  
Acid Modification ◽  
Toc Removal

The surface properties and performance of activated carbon (AC) used for catalytic ozonation were investigated after nitric acid modification (N-AC) and Cu (II)-loaded (N-Cu-AC). The results showed that the nitric acid modification could increase the amount of surface functional groups of AC. As a result, the adsorption capacity and catalytic activity of AC could be improved. The surface functional groups and Cu (II)-loaded of N-Cu-AC showed a synergistic effect on catalytic ozonation, where the catalytic activity of Cu (II)-loaded was more stable. N-Cu-AC was an effective and reusable catalyst for catalytic ozonation. The highest TOC removal efficiency of 58.0% could be achieved when N-Cu-AC was used for 60 min-catalytic ozonation treatment of acid red 3R.

Sign in / Sign up

Export Citation Format

Share Document