Tailoring surface properties of functionalized graphene papers aiming to enzyme immobilization

2021 ◽  
Author(s):  
Jéssica Luzardo ◽  
Douglas Aguiar ◽  
Alexander Silva ◽  
Sanair Oliveira ◽  
Braulio Archanjo ◽  
...  
Keyword(s):  
Cyclic Voltammetry ◽  
Photoelectron Spectroscopy ◽  
Enzyme Stability ◽  
Immobilized Enzymes ◽  
Free Enzyme ◽  
X Ray ◽  
Force Microscopy ◽  
Enzyme Solution ◽  
Atomic Force ◽  
Composition And Structure

The use of enzymes as catalysts requires recovery and reuse to make the process viable. Enzymatic immobilization changes enzyme stability, activity, and specificity. It is very important to explore new substrates for immobilization with appropriate composition and structure to improve the efficiency of the immobilized enzymes. This work explores the use of two different graphene oxide papers, one produced by oxidation route (GO) and the other by electrochemical synthesis (EG), aiming for β-galactosidase immobilization. The chemical and structural properties of these two papers were characterized by Raman spectroscopy, X-ray photoelectron spectroscopy and X-ray diffraction. Atomic force microscopy images showed that EG paper ensured more efficient immobilization of the enzymes on the surface of the paper. Cyclic voltammetry was used to monitor the reaction of conversion of lactose to glucose in the free enzyme solution and graphene paper immobilized enzyme solutions. The cyclic voltammetry analysis showed that immobilized enzymes on GO paper showed an improvement in the activity of β-galactose when compared to free enzyme solution, as well as enzyme immobilized on a glassy carbon electrode.

Ultrathin Ruthenium(II) Complex–H4SiW12O40 Multilayer Film

2008 ◽  
Vol 8 (3) ◽  
pp. 1248-1253 ◽  
Author(s):  
Yu-Qi Zhang ◽  
Li-Hua Gao ◽  
Ke-Zhi Wang ◽  
Hong-Jun Gao ◽  
Ye-Liang Wang
Keyword(s):  
Atomic Force Microscopy ◽  
Cyclic Voltammetry ◽  
Photoelectron Spectroscopy ◽  
Self Assembly ◽  
Multilayer Film ◽  
Multilayer Films ◽  
Layer By Layer ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force

A dipolar Ru(II) complex, [(bpy)2Ru(bpbh)Ru(bpy)2](ClO4)4 {where bpbh = 1,6-bis-[2-(2-pyridyl) benzimidazoyl]hexane, bpy = 2,2′-bipyridine}, was synthesized and characterized. A multilayer film of at least 18 layers was successfully prepared by alternating adsorption of H4SiW12O40 and [Ru2(bpy)4(bpbh)](ClO4)4 by electrostatic layer-by-layer self-assembly. The multilayer films were studied by ultraviolet-visible and X-ray photoelectron spectroscopy, atomic force microscopy, and cyclic voltammetry.

Investigation of the Effect of Uv-Assisted Oxidation and Nitridation of Hafnium Metal Films

2003 ◽  
Vol 780 ◽  
Author(s):  
C. Essary ◽  
V. Craciun ◽  
J. M. Howard ◽  
R. K. Singh
Keyword(s):  
Uv Radiation ◽  
Photoelectron Spectroscopy ◽  
Grazing Angle ◽  
X Ray Diffraction ◽  
Metal Thin Films ◽  
X Ray ◽  
Force Microscopy ◽  
Si Substrates ◽  
Atomic Force ◽  
Silicon Interface

AbstractHf metal thin films were deposited on Si substrates using a pulsed laser deposition technique in vacuum and in ammonia ambients. The films were then oxidized at 400 °C in 300 Torr of O2. Half the samples were oxidized in the presence of ultraviolet (UV) radiation from a Hg lamp array. X-ray photoelectron spectroscopy, atomic force microscopy, and grazing angle X-ray diffraction were used to compare the crystallinity, roughness, and composition of the films. It has been found that UV radiation causes roughening of the films and also promotes crystallization at lower temperatures.Furthermore, increased silicon oxidation at the interface was noted with the UVirradiated samples and was shown to be in the form of a mixed layer using angle-resolved X-ray photoelectron spectroscopy. Incorporation of nitrogen into the film reduces the oxidation of the silicon interface.

Curcumin delivery by modified biosourced carbon-based nanoparticles

Nanomedicine ◽  
2022 ◽  
Author(s):  
Hossein Danafar ◽  
Marziyeh Salehiabar ◽  
Murat Barsbay ◽  
Hossein Rahimi ◽  
Mohammadreza Ghaffarlou ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Free System ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Good Biocompatibility ◽  
Drug Free ◽  
Mcf 7 ◽  
Carbon Based

Aim: To prepare a novel hybrid system for the controlled release and delivery of curcumin (CUR). Methods: A method for the ultrasound-assisted fabrication of protein-modified nanosized graphene oxide-like carbon-based nanoparticles (CBNPs) was developed. After being modified with bovine serum albumin (BSA), CUR was loaded onto the synthesized hybrid (labeled CBNPs@BSA–CUR). The structure and properties of the synthesized nanoparticles were elucidated using transmission electron microscopy (TEM), atomic force microscopy (AFM), ultraviolet-visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FTIR) and x-ray photoelectron spectroscopy (XPS) methods. Results: CBNPs@BSA–CUR showed pH sensitivity and were calculated as controlled CUR release behavior. The drug-free system exhibited good biocompatibility and was nontoxic. However, CBNPs@BSA–CUR showed acceptable antiproliferative ability against MCF-7 breast cancer cells. Conclusion: CBNPs@BSA–CUR could be considered a highly promising nontoxic nanocarrier for the delivery of CUR with good biosafety.

Effect of Surface Chemistry on Ruthenium Wet Etching

2021 ◽  
Vol 314 ◽  
pp. 302-306
Author(s):  
Quoc Toan Le ◽  
E. Kesters ◽  
M. Doms ◽  
Efrain Altamirano Sánchez
Keyword(s):  
Surface Roughness ◽  
Photoelectron Spectroscopy ◽  
Etching Rate ◽  
Wet Etching ◽  
X Ray ◽  
Force Microscopy ◽  
Metal Free ◽  
Atomic Force ◽  
Different Types ◽  
Effect Of Surface

Different types of ALD Ru films, including as-deposited, annealed Ru, without and with a subsequent CMP step, were used for wet etching study. With respect to the as-deposited Ru, the etching rate of the annealed Ru film in metal-free chemical mixtures (pH = 7-9) was found to decrease substantially. X-ray photoelectron spectroscopy characterization indicated that this behavior could be explained by the presence of the formation of RuOx (x = 2,3) caused by the anneal. A short CMP step applied to the annealed Ru wafer removed the surface RuOx, at least partially, resulting in a significant increase of the etching rate. The change in surface roughness was quantified using atomic force microscopy.

Investigation of Ti/CuO interface by X-ray photoelectron spectroscopy and atomic force microscopy

2018 ◽  
Vol 51 (2) ◽  
pp. 246-253
Author(s):  
Dev Raj Chopra ◽  
Justin Seth Pearson ◽  
Darius Durant ◽  
Ritesh Bhakta ◽  
Anil R. Chourasia
Keyword(s):  
Atomic Force Microscopy ◽  
Photoelectron Spectroscopy ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force

Characterization of X-ray irradiated graphene oxide coatings using X-ray diffraction, X-ray photoelectron spectroscopy, and atomic force microscopy

2013 ◽  
Vol 28 (2) ◽  
pp. 68-71 ◽  
Author(s):  
Thomas N. Blanton ◽  
Debasis Majumdar
Keyword(s):  
Atomic Force Microscopy ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
High Energy ◽  
X Ray Diffraction ◽  
Carbon Phase ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Before And After

In an effort to study an alternative approach to make graphene from graphene oxide (GO), exposure of GO to high-energy X-ray radiation has been performed. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) have been used to characterize GO before and after irradiation. Results indicate that GO exposed to high-energy radiation is converted to an amorphous carbon phase that is conductive.

scholarly journals Influence of the Microstructure and Optical Constants on Plasmonic Properties of Copper Nanolayers

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7292
Author(s):  
Tomasz Rerek ◽  
Beata Derkowska-Zielinska ◽  
Marek Trzcinski ◽  
Robert Szczesny ◽  
Mieczyslaw K. Naparty ◽  
...  
Keyword(s):  
Surface Plasmon ◽  
Photoelectron Spectroscopy ◽  
Surface Plasmon Polariton ◽  
Optical Constants ◽  
Localized Surface Plasmon ◽  
Silicon Substrates ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Plasmon Polariton

Copper layers with thicknesses of 12, 25, and 35 nm were thermally evaporated on silicon substrates (Si(100)) with two different deposition rates 0.5 and 5.0 Å/s. The microstructure of produced coatings was studied using atomic force microscopy (AFM) and powder X-ray diffractometer (XRD). Ellipsometric measurements were used to determine the effective dielectric functions <ε˜> as well as the quality indicators of the localized surface plasmon (LSP) and the surface plasmon polariton (SPP). The composition and purity of the produced films were analysed using X-ray photoelectron spectroscopy (XPS).

Improved Functional Capabilities of Quasi-Two-Dimensional Tungsten Oxide Nanostructures

2016 ◽  
Vol 689 ◽  
pp. 55-59
Author(s):  
Serge Zhuiykov
Keyword(s):  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Current Sensing ◽  
X Ray ◽  
Force Microscopy ◽  
Functional Capabilities ◽  
Atomic Force ◽  
Oxide Nanostructures ◽  
Afm Analysis

Electrical properties and morphology of orthorhombic β–WO3 nano-flakes with thickness of ~7-9 nm were investigated at the nanoscale using energy dispersive X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and current sensing force spectroscopy atomic force microscopy (CSFS-AFM, or PeakForce TUNATM). CSFS-AFM analysis established good correlation between the topography of the developed nanostructures and various features of WO3 nano-flakes synthesized via a two-step sol-gel-exfoliation method. It was determined that β–WO3 nano-flakes annealed at 550°C possess distinguished and exceptional thickness-dependent properties in comparison with the bulk, micro- and nano-structured WO3 synthesized at alternative temperatures.

Sign in / Sign up

Export Citation Format

Share Document