THE IMPACT OF THE SHARE OF BIOGAS IN A SUPPLY DOSE ON LOAD PARAMETERS IN THE COMBUSTION CHAMBER OF A DUAL-FUEL COMPRESSION-IGNITION ENGINE

2016 ◽  
Vol 23 (2) ◽  
pp. 407-414
Author(s):  
Sławomir Wierzbicki ◽  
Grzegorz Boruta ◽  
Andrzej Piętak ◽  
Maciej Mikulski ◽  
Leszek Krzywonos
Keyword(s):  
Combustion Chamber ◽  
Dual Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
The Impact

scholarly journals EFFECT OF CNG IN A FUEL DOSE ON THE COMBUSTION PROCESS OF A COMPRESSION-IGNITION ENGINE

Transport ◽  
2015 ◽  
Vol 30 (2) ◽  
pp. 162-171 ◽  
Author(s):  
Maciej Mikulski ◽  
Sławomir Wierzbicki
Keyword(s):  
Natural Gas ◽  
Combustion Chamber ◽  
Alternative Fuels ◽  
Combustion Process ◽  
Diesel Oil ◽  
Dual Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Compression Ignition Engines ◽  
Main Component

Currently, one of the major trends in the research of contemporary combustion engines involves the potential use of alternative fuels. Considerable attention has been devoted to methane, which is the main component of Natural Gas (NG) and can also be obtained by purification of biogas. In compression-ignition engines fired with methane or Compressed Natural Gas (CNG), it is necessary to apply a dual-fuel feeding system. This paper presents the effect of the proportion of CNG in a fuel dose on the process of combustion. The recorded time series of pressure in a combustion chamber was used to determine the repeatability of the combustion process and the change of fuel compression-ignition delay in the combustion chamber. It has been showed that NG does not burn completely in a dual-fuel engine. The best conditions for combustion are ensured with higher concentrations of gaseous fuel. NG ignition does not take place simultaneously with diesel oil ignition. Moreover, if a divided dose of diesel is injected, NG ignition probably takes place at two points, as diesel oil.

Effects of injection strategy on performance and emissions metrics in a diesel/methane dual-fuel single-cylinder compression ignition engine

2019 ◽  
Vol 20 (10) ◽  
pp. 1059-1072 ◽  
Author(s):  
Metin Korkmaz ◽  
Dennis Ritter ◽  
Bernhard Jochim ◽  
Joachim Beeckmann ◽  
Dirk Abel ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
Deep Understanding ◽  
Injection Pressure ◽  
Dual Fuel ◽  
Injection Timing ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Single Cylinder ◽  
Cylinder Compression ◽  
The Impact

In order to counteract the drawbacks of conventional diesel combustion, which can lead to high indicated specific nitric oxide and indicated specific particulate matter emissions, a promising diesel-dual-fuel concept is investigated and evaluated. In this study, methane is used as supplement to liquid diesel fuel due to its benefits like high knock resistance and clean combustion. A deep understanding of the in-cylinder process is required for engine design and combustion controller development. To investigate the impact of different input parameters such as injection duration, injection timing, and substitution rate on varying output parameters like load, combustion phasing, and engine-out emissions, numerous investigations were conducted. Engine speed, global equivalence ratio, and injection pressure were held constant. The experiments were carried out in a modified single-cylinder compression ignition engine. The results reveal regimes with different dependencies between injection timing of diesel fuel and combustion phasing. This work demonstrates the potential of the diesel-dual-fuel concept by combining sophisticated combustion control with the favorable combustion mode. Without employing exhaust gas recirculation, TIER IMO 3 emissions limits are met while ensuring high thermal efficiency.

scholarly journals Experimental investigation of the performance and emission characteristics of a CI engine equipped with a modified truncated cone piston crown operated on diesel and shea-butter biodiesel

2018 ◽  
Vol 3 (10) ◽  
pp. 126-131 ◽  
Author(s):  
Olumide Adewole Towoju ◽  
Ademola A. Dare ◽  
Samson K. Fashogbon
Keyword(s):  
Combustion Chamber ◽  
Shea Butter ◽  
Emission Characteristics ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Performance And Emission ◽  
Base Angle ◽  
Truncated Cone ◽  
Piston Crown ◽  
The Impact

Biodiesels and Improved combustion chamber design have better in-cylinder air motion which positioned them to offer increased advantages in addressing the major concern of high emission and low thermal efficiency of compression ignition engines. This study therefore investigated the impact of Shea-butter biodiesel and redesigned combustion chamber on the performance and emission characteristics of a compression ignition engine. Biodiesel was prepared from Shea-butter using the standard process. Experiments were conducted on a Yoshita-165F engine operated on a blend of AGO and Shea-butter biodiesel and then Yoshita-165F engine equipped with a truncated cone piston crown with a cone base-angle of 40° modified from the standard piston, operated on a blend of AGO and Shea-butter to determine the engines’ performance characteristics using a TQ TD115 MKH Absorption Dynamometer. The performance and emission characteristic of the engine witnessed an improvement with the use of the truncated cone piston crown with a cone base-angle of 40°. This was also observed with AGO/Shea-butter biodiesel blend as fuel and was particularly well pronounced when utilized as a fuel for the truncated cone piston crown equipped engine. Compression ignition engine equipped with the modified piston and operated on AGO/Shea-butter biodiesel led to improvement in performance.

scholarly journals Hydroxyl radicals as an indicator of knocking combustion in the dual-fuel compression-ignition engine

2017 ◽  
Vol 168 (1) ◽  
pp. 178-185
Author(s):  
Jakub LASOCKI ◽  
Piotr ORLIŃSKI ◽  
Marcin WOJS ◽  
Marlena OWCZUK ◽  
Anna MATUSZEWSKA
Keyword(s):  
Combustion Chamber ◽  
Hydroxyl Radicals ◽  
Current Knowledge ◽  
Combustion Process ◽  
Diesel Oil ◽  
Dual Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Working Medium ◽  
Engine Components

The occurrence of knocking combustion is one of the basic problems of dual-fuel compression-ignition engines supplied with diesel oil and gaseous fuel. In order to detect this phenomenon and evaluate its intensity, several methods are commonly used, including the analysis of pressure of working medium in the combustion chamber of the engine or vibrations of certain engine components. This paper discusses the concept of using mass fraction of hydroxyl radicals as the indicator of the occurrence of knocking combustion. Current knowledge on the conditions of hydroxyl radical formation in the engine combustion chamber has been systematized and the results of research on this subject have been presented. Theoretical considerations are illustrated by exemplary results of simulation studies of the combustion process in a dual-fuel compression-ignition engine supplied with diesel oil and methane. The conclusions drawn may be -useful for the development of dual-fuel engine control systems.

Mapping the combustion modes of a dual-fuel compression ignition engine

2021 ◽  
pp. 146808742110183
Author(s):  
Jonathan Martin ◽  
André Boehman
Keyword(s):  
Direct Injection ◽  
Fuel Combustion ◽  
Dual Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Combustion Modes ◽  
Si Engines ◽  
Dual Fuel Combustion ◽  
Soot Emissions ◽  
Ci Engines

Compression-ignition (CI) engines can produce higher thermal efficiency (TE) and thus lower carbon dioxide (CO2) emissions than spark-ignition (SI) engines. Unfortunately, the overall fuel economy of CI engine vehicles is limited by their emissions of nitrogen oxides (NOx) and soot, which must be mitigated with costly, resource- and energy-intensive aftertreatment. NOx and soot could also be mitigated by adding premixed gasoline to complement the conventional, non-premixed direct injection (DI) of diesel fuel in CI engines. Several such “dual-fuel” combustion modes have been introduced in recent years, but these modes are usually studied individually at discrete conditions. This paper introduces a mapping system for dual-fuel CI modes that links together several previously studied modes across a continuous two-dimensional diagram. This system includes the conventional diesel combustion (CDC) and conventional dual-fuel (CDF) modes; the well-explored advanced combustion modes of HCCI, RCCI, PCCI, and PPCI; and a previously discovered but relatively unexplored combustion mode that is herein titled “Piston-split Dual-Fuel Combustion” or PDFC. Tests show that dual-fuel CI engines can simultaneously increase TE and lower NOx and/or soot emissions at high loads through the use of Partial HCCI (PHCCI). At low loads, PHCCI is not possible, but either PDFC or RCCI can be used to further improve NOx and/or soot emissions, albeit at slightly lower TE. These results lead to a “partial dual-fuel” multi-mode strategy of PHCCI at high loads and CDC at low loads, linked together by PDFC. Drive cycle simulations show that this strategy, when tuned to balance NOx and soot reductions, can reduce engine-out CO2 emissions by about 1% while reducing NOx and soot by about 20% each with respect to CDC. This increases emissions of unburnt hydrocarbons (UHC), still in a treatable range (2.0 g/kWh) but five times as high as CDC, requiring changes in aftertreatment strategy.

Sign in / Sign up

Export Citation Format

Share Document