scholarly journals Reduction of slaughter age of Hanwoo steers by early genotyping based on meat yield index

2020 ◽  
Vol 33 (5) ◽  
pp. 770-777
Author(s):  
Chang Dae Jeong ◽  
Mahfuzul Islam ◽  
Jong-Joo Kim ◽  
Yong-Il Cho ◽  
Sang-Suk Lee
Keyword(s):  
Snp Array ◽  
Carcass Weight ◽  
Related Gene ◽  
Marbling Score ◽  
Meat Yield ◽  
Growing Period ◽  
Slaughter Age ◽  
Snp Array Analysis ◽  
Fat Thickness ◽  
Highly Correlated

Objective: This study was conducted to determine early hereditary endowment to establish a short-term feeding program.Methods: Hanwoo steers (n = 140) were equally distributed into four groups (35/group) based on genetic meat yield index (MYI) viz. the greatest, great, low, and the lowest at Jukam Hanwoo farm, Goheung. All animals were fed in group pens (5 animals/pen) with similar feed depending on the growth stage. Rice straw was provided ad libitum, whereas concentrate was fed at 5.71 kg during the growing period (6 to 13 mo) and 9.4 kg during the fattening period (13 to 28 mo). Body weight (BW) was measured at two-month intervals, whereas carcass weight was determined at slaughtering at about 31 months of age. The Affymetrix Bovine Axiom Array 640K single nucleotide polymorphism (SNP) chip was used to determine the meat quantity-related gene in the blood.Results: After 6 months, the highest (p<0.05) BW was observed in the greatest MYI group (190.77 kg) and the lowest (p<0.05) in the lowest MYI group (173.51 kg). The great MYI group also showed significantly (p<0.05) higher BW than the lowest MYI group. After 16 and 24 months, the greatest MYI group had the highest BW gain (p<0.05) and were therefore slaughtered the earliest. Carcass weight was significantly (p<0.05) higher in the greatest and the great MYI groups followed by the low and the lowest MYI groups. Back-fat thickness in the greatest MYI group was highly correlated to carcass weight and marbling score. The SNP array analysis identified the carcass-weight related gene BTB-01280026 with an additive effect. The steers with the allele increasing carcass weight had heavier slaughter weight of about 12 kg.Conclusion: Genetic MYI is a potential tool for calf selection, which will reduce the slaughter age while simultaneously increasing carcass weight, back-fat thickness, and marbling score.

scholarly journals The effect of slaughter age and sex class to carcass characteristic of Red Brahman Crossbred Cattle

2021 ◽  
Vol 888 (1) ◽  
pp. 012028
Author(s):  
S S C Maulid ◽  
A Susilo ◽  
D Purwanto ◽  
Kuswati
Keyword(s):  
Carcass Weight ◽  
Duncan Multiple Range Test ◽  
Crossbred Cattle ◽  
Slaughter Weight ◽  
Carcass Characteristic ◽  
Slaughter Age ◽  
Fat Thickness ◽  
Dressing Percentage ◽  
Range Test ◽  
Age And Sex

Abstract This research was conducted to examine the effect of slaughter age and sex class to carcass characteristic from Red Brahman Crossbred Cattle. The research materials were 126 heads (grouped by slaughter age (<1,5 years, 2-2,5 years, and 3 years) and sex class (bull and steer)) with taken from KASA Company, rested for 12-24 hours, and slaughtered in AM FARM abattoir with halal MUI slaughter methods. The research method was used field experiment. The data of research were analysis by using Complete Randomized Factorial Design (2X3) and Duncan Multiple Range Test if there were differences. Parameters of carcass characteristic were slaughter weight, hot carcass weight, dressing percentage, carcass components percentage (meat, bone, fat), MBR, MFR, rib eyes area, and 12th fat thickness of ribs. The results of this research showed that slaughter age and sex class has significantly (P<0,05) affect to slaughter weight and hot carcass weight. Interactions of slaughter age and sex class has significantly (P<0,05) affect dressing percentage, bone and meat percentage, MBR and MFR, and has not significant (P>0,05) rib eyes area and fat thickness. From these results, it can be concluded that slaughter age and sex class affect carcass characteristics of Red Brahman Crossbred Cattle.

Effect of zeranol on fat deposition and carcass traits in beef heifers

1992 ◽  
Vol 72 (4) ◽  
pp. 965-968 ◽  
Author(s):  
B. D. King ◽  
R. D. Bergen ◽  
J. J. McKinnon ◽  
R. D. H. Cohen ◽  
R. N. Kirkwood
Keyword(s):  
Key Words ◽  
Carcass Traits ◽  
Fat Deposition ◽  
Carcass Weight ◽  
Beef Heifers ◽  
Marbling Score ◽  
Meat Yield ◽  
Lean Meat ◽  
Beef Heifer

Non-pregnant beef heifers implanted with zeranol at birth and at 100 and 200 d of age were fed a finishing ration for 78 d to slaughter at 21–22 mo of age. Rate of fat deposition, grade fat and marbling score were less (P < 0.05) and carcass weight, rib-eye area and lean-meat yield were greater (P < 0.05) for implanted heifers than for non-implanted heifers. Key words: Zeranol, ultrasound, fat deposition, carcass, beef heifer

A survey of marbling fat in Canadian beef carcasses

1991 ◽  
Vol 71 (4) ◽  
pp. 987-991 ◽  
Author(s):  
S. D. M. Jones ◽  
A. K. W. Tong ◽  
S. Talbot
Keyword(s):  
Key Words ◽  
Carcass Weight ◽  
Point Scale ◽  
Marbling Score ◽  
Beef Carcasses ◽  
Fat Thickness ◽  
Beef Carcass

Marbling score was assessed in 20 437 Canadian beef carcasses on a 10-point scale (1 = very abundant, 10 = devoid) in six provinces during the period August to November 1989. Heifer carcasses had a lower marbling score (more marbling fat) than steer carcasses, and both had lower marbling scores (more marbling fat) than bull carcasses. Marbling increased as Canada grade changed from B1 to A1 and from A1 through to A4, indicating that marbling fat increased with carcass fatness. The regression of marbling score on carcass weight and carcass 12th rib fat thickness, although significant, showed that these traits only accounted for 0.5 and 6%, respectively, of the overall variation in marbling score. The overall distribution of marbling scores showed that 20.6% of carcasses had small or more marbling, 57.9% had slight marbling, 20.4% had traces of marbling and 1.1% were devoid of marbling. Key words: Beef, carcass, marbling, survey

PORK CARCASS GRADING: THE MAGNITUDE OF BREED AND SEX BIASES IN THE PREDICTION OF MEAT YIELD FROM A SINGLE FAT MEASUREMENT

1985 ◽  
Vol 65 (3) ◽  
pp. 619-625 ◽  
Author(s):  
W. RAE ◽  
S. D. M. JONES ◽  
B. W. KENNEDY
Keyword(s):  
Sex Differences ◽  
Key Words ◽  
Substantial Reduction ◽  
Carcass Weight ◽  
Sex Bias ◽  
Yield Prediction ◽  
Meat Yield ◽  
Meat Content ◽  
Fat Thickness ◽  
Sex Biases

The magnitude of breed and sex biases in the prediction of meat yield using a single fat measurement was investigated under commercial conditions. Warm carcasses (n = 174) originating from four purebreeds (Yorkshire, 24 boars, 17 gilts; Landrace, 22 boars, 27 gilts; Hampshire, 24 boars, 15 gilts; Duroc, 21 boars, 24 gilts) weighing close to 80 kg were assessed for fat thickness at the maximum loin with a ruler (current Canadian carcass grading measurement) and at the last rib 70 mm from the midline with a Hennessey Grading Probe. All carcasses were evaluated for retail and lean yield 24 h post-slaughter. At the same carcass weight (78.7 kg), significant differences in both retail and lean yield were found (Hampshire > Landrace; boars > gilts), which largely reflected breed and sex differences in fattening. At the same loin fat thickness (25 mm) breed bias in retail yield amounted to 23 g/kg carcass, while sex bias amounted to only 2 g/kg carcass. At the same last rib, fat thickness breed bias in retail yield was reduced to 12 g/kg carcass, while sex bias increased to 4 g/kg carcass. The effect of changing sites of fat measurement from the loin to the last rib in this study resulted in a substantial reduction in breed bias (1.81 kg to 0.98 kg of retail yield), but to increased sex bias (0.15 kg to 0.28 kg of retail yield). Similar trends were found when lean yield was used as the base instead of retail yield. Prediction equations for retail and lean yield were found to be more precise using last rib fat thickness than those using the maximum loin fat measurement. It was concluded that breed bias would be reduced if last rib fat thickness was used to predict the meat content of pork carcasses. Key words: Boar, breed, gilt, pork grading, pork carcass, meat yield

COMPARISONS OF CROSSBRED CALVES BY SOUTH DEVON, MAINE- ANJOU AND SIMMENTAL SIRES FOR SOME BEEF PRODUCTION TRAITS

1974 ◽  
Vol 54 (2) ◽  
pp. 197-203 ◽  
Author(s):  
J. A. NEWMAN ◽  
G. M. WEISS ◽  
B. SCHRADER
Keyword(s):  
Birth Weight ◽  
Significant Interaction ◽  
Statistical Significance ◽  
Average Daily Gain ◽  
Carcass Weight ◽  
Production Traits ◽  
Marbling Score ◽  
Weaning Weight ◽  
Slaughter Age ◽  
Daily Gain

Breed of sire comparisons are made amongst calves born to commercial Hereford cows and sired by bulls of the South Devon (SD, 10 bulls used), Maine-Anjou (MA, two bulls used) and Simmental (SIM, eight bulls used) breeds. Numbers of observations ranged from 239 bulls and 224 heifers for "ease of birth" to 98 bulls for carcass traits. The feedlot test period was 91 days and three feedlot treatments were imposed. Slaughter criteria were subjective and "breed-of-sire" differences in slaughter age and carcass weight were not statistically significant (P > 0.05). Differences amongst breed-of-sire means attained statistical significance for "birth weight" (MA > SIM > SD; P < 0.001), weaning weight of males (MA > SIM > SD; P < 0.001), "on-test" weight (MA > SIM > SD; P < 0.001), average daily gain on test (MA > SIM > SD; P < 0.001) average fat depth/100 kg carcass weight (SD > MA = SIM, P < 0.05), trimmed, de-boned, defatted primal cuts per day of age (MA > SIM > SD; P < 0.01), meat marbling score (SD more marbled than SIM more marbled than MA; P <.05). A significant interaction existed between breed of sire and feeding group for average daily gain on test (P < 0.01) and cutability (P < 0.025). Breed-of-sire differences did not attain statistical significance for weaning weight of female calves, loin area/100 kg carcass weight, cut-ability, or meat color score.

CARCASS CHARACTERISTICS OF YEARLING NORMAL AND DOUBLE MUSCLE CROSS BULLS

1989 ◽  
Vol 69 (4) ◽  
pp. 897-903
Author(s):  
P. F. ARTHUR ◽  
M. MAKARECHIAN ◽  
M. A. PRICE ◽  
R. T. BERG
Keyword(s):  
Key Words ◽  
Carcass Characteristics ◽  
Carcass Weight ◽  
Double Muscle ◽  
Slaughter Age ◽  
Fat Thickness

Data on 99 young bulls, which were the progeny of matings of either double muscle bulls and normal cows (DMx) or normal bulls and normal cows (N) born over three calving seasons, were analyzed to compare the carcass characteristics and lean yield of yearling DMx and N bulls. DMx carcasses had larger (P < 0.001) ribeye areas and cutability but smaller (P < 0.001) grade fat and average fat thicknesses than N carcasses, when the data were adjusted to either constant slaughter age (395.7 d) or constant carcass weight (304.7 kg). Muscle:fat and muscle:bone ratios and percent muscle in the 10th-11th-12th rib joint were higher (P < 0.001), while percent fat and percent bone in the rib joint were lower (P < 0.005) in DMx compared to N carcasses, when the data were adjusted to either constant grade fat thickness (10.0 mm) or constant rib joint weight (4871.4 g). The magnitude of the observed superiority of DMx over normal carcasses in lean yield was not the same across carcass grades. For A1 or A2 carcasses, rib joints from DMx carcasses had 8.8 and 5.7%, respectively, more (P < 0.05) muscle than those from N carcasses. Key words: Carcass characteristics, double muscle, crosses, cattle

scholarly journals 40 Effect of calving season in an artificial insemination program on finishing performance and carcass traits

2020 ◽  
Vol 98 (Supplement_2) ◽  
pp. 60-60
Author(s):  
Taylor J Garcia ◽  
Colton A Robison ◽  
Paul A Beck ◽  
Ryan R Reuter ◽  
Blake K Wilson ◽  
...  
Keyword(s):  
Tallgrass Prairie ◽  
Artificial Insemination ◽  
Carcass Traits ◽  
Carcass Weight ◽  
Marbling Score ◽  
Weight Yield ◽  
Ribeye Area ◽  
Wheat Pasture ◽  
Fat Thickness ◽  
Calving Season

Abstract Spring (SPRING) and fall (FALL) born steers (n = 211) were used in a mixed effects model to evaluate calving season and conception method [artificial insemination (AI) or natural service (NS)] on finishing performance and carcass traits. SPRING were weaned in October, grazed dormant range for 90 days and grazed wheat pasture for 90 days before shipping to finish. FALL were weaned in May, and grazed tallgrass prairie for 120 days before shipping to finish. Initial and final BW, days on feed, ADG, DMI, and gain to feed efficiency were evaluated as performance measures. Dry matter intake and gain:feed were analyzed on pen basis. Hot carcass weight, yield grade, fat thickness, ribeye area, and marbling score were collected at harvest. Bodyweight of SPRING and AI steers were heavier (P ≤ 0.05) entering and leaving the feedlot than FALL and NS steers, respectively. Compared to FALL steers, ADG (P &lt; 0.01) and DMI (P = 0.03) were greater for SPRING and required less days on feed (P ≤ 0.05). Calving season and conception method (P ≥ 0.2) did not affect gain:feed. Conception method (P = 0.5) did not affect ADG, DMI, and days on feed. SPRING had higher yield grades (P &lt; 0.01) and increased in fat thickness (P = 0.01) compared to FALL steers. There were no differences (P = 0.2) in hot carcass weight, ribeye area, and marbling score due to season of birth. Steers born from AI mating had greater hot carcass weight (P = 0.01) and marbling score (P = 0.02), but conception method did not affect yield grade, fat thickness, and ribeye area (P &gt; 0.2). These results demonstrate SPRING steers are heavier entering and leaving the feedlot, have higher ADG and DMI, and require less days on feed; however, gain:feed, hot carcass weight, ribeye area, and marbling score did not differ from FALL steers. An economic analysis is needed to validate an AI program based on calving season in north-central Oklahoma.

The effects of fat thickness and degree of marbling on pork colour and structure

1994 ◽  
Vol 74 (1) ◽  
pp. 155-157 ◽  
Author(s):  
S. D. M. Jones ◽  
A. K. W. Tong ◽  
R. Dyck ◽  
C. Campbell
Keyword(s):  
Key Words ◽  
Pork Quality ◽  
Marbling Score ◽  
Processing Plants ◽  
Commercial Processing ◽  
Fat Thickness ◽  
Highly Correlated ◽  
Structure Score ◽  
Lower Frequencies

Fat thickness (3rd–4th last rib) was weakly correlated with subjective pork structure score (R2 = 1.0%) and marbling score (R2 = 1.6%) in 399 boneless pork backs sampled from commercial processing plants. Pork colour and structure scores (R2 = 5.9 and 11.1%) were more highly correlated with marbling score than carcass fat and muscle depths (R2 = < 2.0%). Pork backs that had structure scores of 1 and 2 (extreme to slight soft and exudative pork) tended to have low amounts of marbling (traces or less). A second trial with 311 pork backs also indicated that higher marbling scores were associated with lower frequencies of pale, soft and exudative pork. Key words: Pork quality, marbling, PSE

The relationship between beef sire carcass EPD and progeny phenotype

2002 ◽  
Vol 82 (4) ◽  
pp. 503-506 ◽  
Author(s):  
D. H. Crews
Keyword(s):  
Linear Models ◽  
Carcass Weight ◽  
Regression Coefficients ◽  
Marbling Score ◽  
Muscle Area ◽  
Linear Effect ◽  
Fat Thickness ◽  
Selection For ◽  
The Relationship ◽  
Effect Of Age

Carcass data from purebred steer (n = 207) and heifer (n = 66) progeny of 15 Charolais sires with carcass expected progeny differences (EPD) were used to quantify the relationship between sire EPD and progeny phenotype for hot carcass weight, fat thickness, muscle area, marbling score, and percent lean yield. The model included six slaughter date × sex subclasses, the linear effect of age at harvest (434 ± 18 d), and the appropriate sire EPD for each trait of interest. Differences of the regression coefficients from their theoretical expectation of one were tested using general linear models procedures. Sire EPD was positively (P < 0.0001) associated with progeny performance for hot carcass weight, fat thickness, muscle area, marbling score, and percent lean yield. For all traits, the regression coefficients were not different (P > 0.27) from one. Regression coefficients were 1.16 ± 0.41 kg, 1.27 ± 0.27 mm, 1.23 ± 0.23 cm2, 1.26 ± 0.23 score, and 0.84 ± 0.19% for hot carcass weight, fat thickness, muscle area, marbling score, and percent lean yield, respectively. These results suggest that carcass EPD for hot carcass weight, fat thickness, muscle area, marbling score, and percent lean yield were related to progeny differences at or near theoretical expectations. Selection for carcass merit using appropriate EPD would be expected to be successful. Key words: Beef cattle, carcass, expected progeny difference

scholarly journals PSIV-19 Live and carcass production traits for progeny of an F1 USDA Prime – yield grade 1 carcass clone sire in comparison with progeny of popular reference sires

2019 ◽  
Vol 97 (Supplement_3) ◽  
pp. 228-228
Author(s):  
Forest L Francis ◽  
Dean Hawkins ◽  
Gregg Veneklasen ◽  
David Lust ◽  
Ty Lawrence
Keyword(s):  
Carcass Weight ◽  
Morbidity And Mortality ◽  
Longissimus Muscle ◽  
Production Traits ◽  
Marbling Score ◽  
Muscle Area ◽  
Weaning Weight ◽  
High Performing ◽  
Fat Thickness ◽  
Normal Lungs

Abstract The cloning of beef carcasses that grade USDA Prime – Yield Grade 1 (P1) has produced a sire that ranked well against high performing bulls from multiple breeds. An F1 (P1 x P1) sire would ideally exhibit heterosis and outperform its high performing parents. A terminal sire study was conducted comparing progeny of an F1 (P1 x P1) sire (AxG1) against progeny (heifers and steers) of four high performing sires of varying breeds {P1 (Alpha); Angus; Simmental; Angus x Simmental}. Production traits included morbidity and mortality frequencies, weaning weight, and feedlot arrival weight; carcass traits included edible liver and normal lung frequencies, hot carcass weight, longissimus muscle area, 12th rib fat thickness, and marbling score. A completely randomized experimental design was used; data was analyzed using a mixed model with a fixed effect of sire and random effects of harvest date, sex, and pen. Feedlot arrival weight, frequencies of morbidity and mortality, 12th rib fat thickness, and frequency of grading Certified Angus Beef or USDA Select did not differ (P ≥ 0.16) between sires. Weaning weight and frequency of normal lungs tended (P ≤ 0.08) to differ amongst sires. Differences in hot carcass weight (P &lt; 0.01), longissimus muscle area (P &lt; 0.01), marbling score (P &lt; 0.01), and frequencies of normal lungs (P &lt; 0.01) was detected among sires. Additionally, sire differences in USDA yield grade (P &lt; 0.01), and frequencies of carcasses grading USDA Prime (P &lt; 0.01) and USDA Choice (P &lt; 0.01) were observed. AxG1 progeny exhibited the least 12th rib fat thickness and lowest USDA yield grade in addition to the largest longissimus muscle area, highest marbling score, and greatest frequency of USDA Prime. These data suggest that AxG1 competed extremely well against other high performing industry sires.

Sign in / Sign up

Export Citation Format

Share Document