scholarly journals A Survey of Stakeholder Visualization Approaches

2016 ◽  
Vol 2 (1,2) ◽  
Author(s):  
Martin Cenek ◽  
Ondřej Částek
Keyword(s):  
Three Dimensional ◽  
The Other ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Advantages And Disadvantages ◽  
The Third ◽  
Model Based ◽  
The Relationship ◽  
Over Time

The aim of this paper is to present an overview of studies for the representation/visualization of stakeholders with a proposal of our own method of visualization. The following text examines the existing representational methods and at the same time critically evaluates their advantages and disadvantages. In addition, our own proposed approach is also presented.The need to develop visualization methods for use in the concept of stakeholders has been accepted by researchers, and it is possible to encounter number of various alternatives which have been applied more or less successfully. The shared weakness of the majority of the models is that they only represent two main attributes simultaneously. When such models do contain three variables, then the third one is only a complementary aspect of the relationship compared to the two dominant attributes.Our proposed visualisation model based on three Mitchell´s (1997) stakeholder attributes should overcome the before mentioned disadvantage. Also, it takes into account the development over time in accordance with the dynamic of the relationships with the stakeholders. Therefore, the proposed three-dimensional model meets these needs and simultaneously removes the shortcomings of the other models, which are identified in our overview presented in this paper.

A New Cylinder Profile of Double-Action Sliding Vane Compressor and its Three Dimensional Model Based on SolidWorks

2011 ◽  
Vol 105-107 ◽  
pp. 2263-2266
Author(s):  
Chun Hui Lu
Keyword(s):  
Three Dimensional ◽  
The Other ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Working Chamber ◽  
Model Based ◽  
Chamber Volume ◽  
Profile Equation ◽  
Compressor Design

Profile is the most important base in double-action compressor design. Different cylinder profile decides different working chamber volume in double-action sliding vane compressor. Five equations of cylinder profile were researched by calculating the working chamber volumes and a new cylinder profile equation of double-action sliding vane compressor was composed to get larger chamber. In same condition with the other equations, the working chamber volume of new profile is bigger than the old profiles over 20 percent while it has no change in the moving and friction characters. And a three dimensional model based on SolidWorks of a new profile was done. Finally, it was assembled successfully in computer to check the design.

Problems Associated with the Use of Skirts on Hovercraft

1967 ◽  
Vol 182 (1) ◽  
pp. 201-218
Author(s):  
W. A. Crago
Keyword(s):  
Three Dimensional ◽  
Model Tests ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Operational Conditions ◽  
The Third ◽  
Rough Water ◽  
Delamination Life ◽  
First Time

The lecture commences with a brief description of early hovercraft work and shows how the advent of flexible extensions to the peripheral jets—or ‘skirts’—constituted a breakthrough without which the hovercraft would never have become a practical proposition with the ability to operate over waves and rough ground. It is shown that the introduction of skirts, whilst providing a solution in one respect, also led to a series of problems and three of these are singled out for further discussion. First it is shown that whilst a relatively high internal skirt pressure is desirable to maintain skirt shape under operational conditions, this pressure can also lead to a high rough water drag. The second problem is that of ‘plough in’ and overturning, which is intimately associated with the use of skins. The hydrodynamic mechanisms of both these undesirable phenomena are for the first time explained in detail and are illustrated by means of data obtained from two- and three-dimensional model tests. The third problem raised by the introduction of skirts is skirt oscillation and wear. The techniques necessary to investigate delamination are described and some of the factors which have been shown to be important in increasing delamination life are outlined.

scholarly journals A three dimensional model-based simulation of the wrist joint during radioulnar deviation

2015 ◽  
Vol 81 (827) ◽  
pp. 14-00653-14-00653
Author(s):  
Satoshi SHIMAWAKI ◽  
Takushi SHINDO ◽  
Naotaka SAKAI ◽  
Masataka NAKABAYASHI
Keyword(s):  
Wrist Joint ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Model Based

A three-dimensional gravity model of the southern contact of the Sebago pluton, Maine

1998 ◽  
Vol 35 (6) ◽  
pp. 649-656 ◽  
Author(s):  
Mark D Behn ◽  
J Dykstra Eusden, Jr. ◽  
John A Notte III
Keyword(s):  
Three Dimensional ◽  
Average Thickness ◽  
Uniform Thickness ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Metasedimentary Rocks ◽  
The North ◽  
Dimensional Gravity ◽  
Relationship Of ◽  
The Relationship

The Sebago pluton is a two-mica granite that intruded the metasedimentary rocks of the Central Maine Terrane around 292 Ma. In recent years, geologists have raised an increasing number of questions related to the overall thickness of the Sebago pluton and the position of its subsurface contact with the underlying metasedimentary rocks. Past studies have shown the Sebago pluton to be a thin, 1-2 km thick, subhorizontal sheet dipping 3° to the northeast. This study examines anomalies in the Earth's gravitational field related to the southern portion of the Sebago pluton, specifically to determine the thickness of the pluton and to locate the subsurface contact between the pluton and the underlying metasedimentary rocks. A three-dimensional model shows the thickest portions of the pluton (~1.8 km) to occur at the bottom of a bowl hape along the southwestern contact. Moreover, the model shows the pluton to thin toward the northern and eastern regions of the study area, where the average thickness is less than 0.5 km. The pluton appears to extend southward below the cover of the metasedimentary rocks along the southwestern contact. Thus, contrary to previous models, the Sebago pluton is not a northeasterly dipping sheet of uniform thickness, but rather an arched sheet with an irregular thickness extending beneath the metasedimentary rocks along both its northern and southern contacts. Based on this new geometry, either the relationship of the pluton to the surrounding metamorphic zones must be modified, or the possibility must be considered that the Sebago pluton is actually a composite batholith, composed of a younger (Permian) granite to the north and an older (Carboniferous) granite to the south.

scholarly journals Epistemicism and modality

2016 ◽  
Vol 46 (4-5) ◽  
pp. 803-835 ◽  
Author(s):  
Juhani Yli-Vakkuri
Keyword(s):  
Model Theory ◽  
Three Dimensional ◽  
The Other ◽  
Object Language ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Metaphysical Necessity ◽  
Actuality Operator

AbstractWhat kind of semantics should someone who accepts the epistemicist theory of vagueness defended in Timothy Williamson's Vagueness (1994) give a definiteness operator? To impose some interesting constraints on acceptable answers to this question, I will assume that the object language also contains a metaphysical necessity operator and a metaphysical actuality operator. I will suggest that the answer is to be found by working within a three-dimensional model theory. I will provide sketches of two ways of extracting an epistemicist semantics from that model theory, one of which I will find to be more plausible than the other.

scholarly journals Muscling in on the third dimension

eLife ◽  
2015 ◽  
Vol 4 ◽  
Author(s):  
Mohsen Afshar Bakooshli ◽  
Penney M Gilbert
Keyword(s):  
Skeletal Muscle ◽  
Muscle Tissue ◽  
Human Skeletal Muscle ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Muscle Disorders ◽  
The Third ◽  
Third Dimension ◽  
Skeletal Muscle Disorders

The development of a functional three-dimensional model of human skeletal muscle tissue could accelerate progress towards new and personalized treatments for skeletal muscle disorders.

Sign in / Sign up

Export Citation Format

Share Document