scholarly journals On special issue “High-Speed Vision and its Technology Diffusion in Society”

2017 ◽  
Vol 35 (8) ◽  
pp. 569-569
Author(s):  
Yoshihiro Watanabe
Viruses ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 1265
Author(s):  
Chioma M. Okeoma

The discovery of extracellular vesicles (EVs) dates back to the early 1940s, when Erwin Chargaff and Randolph West showed that platelet-free plasma contains coagulation components that pellet upon high-speed (31,000× g) centrifugation [...]


2019 ◽  
Vol 27 (3) ◽  
pp. 415-433 ◽  
Author(s):  
Chia-Lin Chen ◽  
Anastasia Loukaitou-Sideris ◽  
José M. de Ureña ◽  
Roger Vickerman

2017 ◽  
Vol 11 (3) ◽  
pp. 343-343
Author(s):  
Terenziano Raparelli ◽  
◽  
Pierluigi Beomonte Zobel

Robotics has reached a top technological level in recent years, a level at which it can be successfully used not only in structured spaces (for less complex applications) but also increasingly in unstructured spaces. Robotics technology is now used effectively in hospitals for rehabilitation and assistive devices, in the home for domestic applications, in the space for autonomous robots and automated vehicles, in amusement parks for entertainment attractions, and on the ground for military applications. In industrial applications, robotics has enlarged its scope with high-speed robots, cooperative robots, and smart robotic devices for production set-ups. These new applications have created new challenges in robotics. New materials have been developed to make frames lighter and smarter, new actuators and sensors have been made in compliance with specific applications and for more advanced performance, new flexible gripper devices have been produced with superior control systems, and new interfaces have been developed that are integrated with the devices and easier to use. This special issue features 18 research articles related to the latest research results and practical case studies in robotics technology. Subjects include robots for rehabilitation, robots as assistive devices, robots for agriculture, robots for exploration, robots for automation and industrial applications, service robots, new actuators, new sensors, new gripping devices, new control strategies, and robotic systems. We deeply appreciate the careful efforts of all the authors and thank the reviewers for their incisive efforts. Without these contributions, this special issue could not have been printed. We hope that this special issue will trigger further research on robotics technology. Finally a special memory of Cesare Rossi, one of the authors, that died suddenly after the preparation of the manuscript.


2013 ◽  
Vol 25 (4) ◽  
pp. 585-585
Author(s):  
Tatsuo Arai ◽  
Fumihito Arai ◽  
Masayuki Yamato ◽  
Yasushi Mae

Research in a new field, the Hyper Bio Assembler for 3D Cellular Innovation, or Bio Assembler for short, started in July 2011 thanks to support from grants-in-aid for scientific research on innovative areas from the Ministry of Education, Culture, Sports, Science and Technology of Japan. The Bio Assembler’s eventual objectives include creating innovative methodologies for building cellular 3D systems that function in vitro – an entirely new area not yet explored. The Bio Assembler is expected to measure and separate target cells at high speed to help in making possible the construction of cellular 3D systems in vitro and the clarification of the principles of ultrahigh-speed measurement and manipulation together with tissue function expression. Understanding the different aspects of cellular 3D systems and establishing technologies and techniques will enable these systems to be constructed, which will, in turn, enable breakthroughs in tissue engineering and biology, thereby establishing new technical areas in high-speed micro-nano robotics. This special issue on Bio Assembler reports the latest achievements in new research through 15 exciting papers and a letter selected based on a thorough-going peer review. We thank the authors for their invaluable perseverance and expertise and the reviewers for their insightful and timely comments. We also thank the Journal of Robotics and Mechatronics editorial board for providing this opportunity to take part in making this special issue possible.


1999 ◽  
Vol 11 (1) ◽  
pp. 1-1
Author(s):  
Kiyoshi Komoriya ◽  

Mobility, or locomotion, is as important a function for robots as manipulation. A robot can enlarge its work space by locomotion. It can also recognize its environment well with its sensors by moving around and by observing its surroundings from various directions. Much researches has been done on mobile robots and the research appears to be mature. Research activity on robot mobility is still very active; for example, 22% of the sessions at ICRA'98 - the International Conference on Robotics and Automation - and 24% of the sessions at IROS'98 - the International Conference on Intelligent Robots and Systems - dealt with issues directly related to mobile robots. One of the main reasons may be that intelligent mobile robots are thought to be the closest position to autonomous robot applications. This special issue focuses on a variety of mobile robot research from mobile mechanisms, localization, and navigation to remote control through networks. The first paper, entitled ""Control of an Omnidirectional Vehicle with Multiple Modular Steerable Drive Wheels,"" by M. Hashimoto et al., deals with locomotion mechanisms. They propose an omnidirectional mobile mechanism consisting of modular steerable drive wheels. The omnidirectional function of mobile mechanisms will be an important part of the human-friendly robot in the near future to realize flexible movements in indoor environments. The next three papers focus on audiovisual sensing to localize and navigate a robot. The second paper, entitled ""High-Speed Measurement of Normal Wall Direction by Ultrasonic Sensor,"" by A. Ohya et al., proposes a method to measure the normal direction of walls by ultrasonic array sensor. The third paper, entitled ""Self-Position Detection System Using a Visual-Sensor for Mobile Robots,"" is written by T. Tanaka et al. In their method, the position of the robot is decided by measuring marks such as name plates and fire alarm lamps by visual sensor. In the fourth paper, entitled ""Development of Ultra-Wide-Angle Laser Range Sensor and Navigation of a Mobile Robot in a Corridor Environment,"" written by Y Ando et al., a very wide view-angle sensor is realized using 5 laser fan beam projectors and 3 CCD cameras. The next three papers discussing navigation problems. The fifth paper, entitled ""Autonomous Navigation of an Intelligent Vehicle Using 1-Dimensional Optical Flow,"" by M. Yamada and K. Nakazawa, discusses navigation based on visual feedback. In this work, navigation is realized by general and qualitative knowledge of the environment. The sixth paper, entitled ""Development of Sensor-Based Navigation for Mobile Robots Using Target Direction Sensor,"" by M. Yamamoto et al., proposes a new sensor-based navigation algorithm in an unknown obstacle environment. The seventh paper, entitled ""Navigation Based on Vision and DGPS Information for Mobile Robots,"" S. Kotani et al., describes a navigation system for an autonomous mobile robot in an outdoor environment. The unique point of their paper is the utilization of landmarks and a differential global positioning system to determine robot position and orientation. The last paper deals with the relationship between the mobile robot and computer networks. The paper, entitled ""Direct Mobile Robot Teleoperation via Internet,"" by K. Kawabata et al., proposes direct teleoperation of a mobile robot via the Internet. Such network-based robotics will be an important field in robotics application. We sincerely thank all of the contributors to this special issue for their cooperation from the planning stage to the review process. Many thanks also go to the reviewers for their excellent work. We will be most happy if this issue aids readers in understanding recent trends in mobile robot research and furthers interest in this research field.


1993 ◽  
Vol 5 (4) ◽  
pp. 315-315
Author(s):  
Haruhisa Kawasaki ◽  

Research institutions have been aggressively working on the following issues in the world of precision machines: micromechatronics, aiming at super downsizing of mechanisms; optomechatronics, aiming at the technological fusion among light, electrons, and machines; and control technology to implement the precise motion or task of a machine. This special issue introduces the recent research activities in these fields in Japan. Micromechatronics suddenly began to receive attention since invisible micro-machines were realized in the latter half of the 1980's. Initially, drawbacks were cited such as the available material limited only to silicon, the limitation to the planar structure, and no applications due to its small power. In recent years, these problems have been gradually overcome, and some applications can be viewed. Some articles in this issue introduce many examples to which micromechatronics is expected to be applied. Optomechatronics is a technology that aims at the fusion among optical, electronics, and mechanical technologies. It was originated early in 1980 and has been recently linked to micromechanism, attracting attention as the technology of integrating mechanism, light, and control. In particular, this issue contains the focusing mechanism for optical disc units, the actuator for microoptical heads, and the optical servo system. Control or mechanism technology plays an important role in the precision motion of machines. Even if this technology is common to precision machines, its problems must often be solved as topics specific to the system under the restrictions of whether or not sensors are present and of actuator performance. This issue discusses the table feed mechanism that is driven by the hydraulic motor for high-speed driving and the servo motor for precision driving, the servo motor driving system by cam curve entry to suppress residual vibration, and the paper feed mechanism by ultrasonic vibration. These approaches take the restrictions of the system into account and provide an effective means for solving actual problems. This issue will provide useful information to researchers and engineers who are interested in this field.


Sign in / Sign up

Export Citation Format

Share Document