Routing Protocol based on Data Aggregation with Energy Efficiency in Underwater Wireless Sensor Networks

Author(s):  
Junyoung Heo ◽  
Hong Min
Author(s):  
A. Radhika ◽  
D. Haritha

Wireless Sensor Networks, have witnessed significant amount of improvement in research across various areas like Routing, Security, Localization, Deployment and above all Energy Efficiency. Congestion is a problem of  importance in resource constrained Wireless Sensor Networks, especially for large networks, where the traffic loads exceed the available capacity of the resources . Sensor nodes are prone to failure and the misbehaviour of these faulty nodes creates further congestion. The resulting effect is a degradation in network performance, additional computation and increased energy consumption, which in turn decreases network lifetime. Hence, the data packet routing algorithm should consider congestion as one of the parameters, in addition to the role of the faulty nodes and not merely energy efficient protocols .Nowadays, the main central point of attraction is the concept of Swarm Intelligence based techniques integration in WSN.  Swarm Intelligence based Computational Swarm Intelligence Techniques have improvised WSN in terms of efficiency, Performance, robustness and scalability. The main objective of this research paper is to propose congestion aware , energy efficient, routing approach that utilizes Ant Colony Optimization, in which faulty nodes are isolated by means of the concept of trust further we compare the performance of various existing routing protocols like AODV, DSDV and DSR routing protocols, ACO Based Routing Protocol  with Trust Based Congestion aware ACO Based Routing in terms of End to End Delay, Packet Delivery Rate, Routing Overhead, Throughput and Energy Efficiency. Simulation based results and data analysis shows that overall TBC-ACO is 150% more efficient in terms of overall performance as compared to other existing routing protocols for Wireless Sensor Networks.


Author(s):  
Mark S. Leeson ◽  
Sahil Patel

Underwater Wireless Sensor Networks (UWSNs) are used in applications such as mineral exploration and environmental monitoring, and must offer reliability and energy efficiency. These are related to each other in the sense that the former requires error-correction which in turn requires energy, consuming battery life in an environment where battery replacement and recharging are difficult. This chapter thus addresses the energy efficiency of three suitable error correction methods for UWSNs, namely Automatic Repeat Request (ARQ), Forward Error Correction (FEC) and Network Coding (NC). The performance of the schemes as a function of transmission distance is determined for various packet sizes by using models of attenuation and noise that represent the underwater environment. ARQ offers the lowest efficiency and NC the highest but there is a distance at which FEC becomes the best option rather than NC suggesting a hybrid FEC/NC method.


Author(s):  
Durairaj Ruby ◽  
Jayachandran Jeyachidra

Environmental fluctuations are continuous and provide opportunities for further exploration, including the study of overground, as well as underground and submarine, strata. Underwater wireless sensor networks (UWSNs) facilitate the study of ocean-based submarine and marine parameters details and data. Hardware plays a major role in monitoring marine parameters; however, protecting the hardware deployed in water can be difficult. To extend the lifespan of the hardware, the inputs, processing and output cycles may be reduced, thus minimising the consumption of energy and increasing the lifespan of the devices. In the present study, time series similarity check (TSSC) algorithm is applied to the real-time sensed data to identify repeated and duplicated occurrences of data for reduction, and thus improve energy consumption. Hierarchical classification of ANOVA approach (HCAA) applies ANOVA (analysis of variance) statistical analysis model to calculate error analysis for realtime sensed data. To avoid repeated occurrences, the scheduled time to read measurements may be extended, thereby reducing the energy consumption of the node. The shorter time interval of observations leads to a higher error rate with lesser accuracy. TSSC and HCAA data aggregation models help to minimise the error rate and improve accuracy.


Author(s):  
Nandoori Srikanth ◽  
Muktyala Sivaganga Prasad

<p>Wireless Sensor Networks (WSNs) can extant the individual profits and suppleness with regard to low-power and economical quick deployment for numerous applications. WSNs are widely utilized in medical health care, environmental monitoring, emergencies and remote control areas. Introducing of mobile nodes in clusters is a traditional approach, to assemble the data from sensor nodes and forward to the Base station. Energy efficiency and lifetime improvements are key research areas from past few decades. In this research, to solve the energy limitation to upsurge the network lifetime, Energy efficient trust node based routing protocol is proposed. An experimental validation of framework is focused on Packet Delivery Ratio, network lifetime, throughput, energy consumption and network loss among all other challenges. This protocol assigns some high energy nodes as trusted nodes, and it decides the mobility of data collector.  The energy of mobile nodes, and sensor nodes can save up to a great extent by collecting data from trusted nodes based on their trustworthiness and energy efficiency.  The simulation outcome of our evaluation shows an improvement in all these parameters than existing clustering and Routing algorithms.<strong></strong></p>


Sensors ◽  
2020 ◽  
Vol 20 (14) ◽  
pp. 3887 ◽  
Author(s):  
Deep Kumar Bangotra ◽  
Yashwant Singh ◽  
Arvind Selwal ◽  
Nagesh Kumar ◽  
Pradeep Kumar Singh ◽  
...  

The lifetime of a node in wireless sensor networks (WSN) is directly responsible for the longevity of the wireless network. The routing of packets is the most energy-consuming activity for a sensor node. Thus, finding an energy-efficient routing strategy for transmission of packets becomes of utmost importance. The opportunistic routing (OR) protocol is one of the new routing protocol that promises reliability and energy efficiency during transmission of packets in wireless sensor networks (WSN). In this paper, we propose an intelligent opportunistic routing protocol (IOP) using a machine learning technique, to select a relay node from the list of potential forwarder nodes to achieve energy efficiency and reliability in the network. The proposed approach might have applications including e-healthcare services. As the proposed method might achieve reliability in the network because it can connect several healthcare network devices in a better way and good healthcare services might be offered. In addition to this, the proposed method saves energy, therefore, it helps the remote patient to connect with healthcare services for a longer duration with the integration of IoT services.


IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 39587-39604 ◽  
Author(s):  
Muhammad Faheem ◽  
Rizwan Aslam Butt ◽  
Basit Raza ◽  
Hani Alquhayz ◽  
Muhammad Waqar Ashraf ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document