scholarly journals Random noise suppression of magnetic resonance sounding signal based on Modified Short-Time Fourier Transform

2021 ◽  
Vol 0 (0) ◽  
pp. 0-0
Author(s):  
◽  
2019 ◽  
Vol 11 (15) ◽  
pp. 1829 ◽  
Author(s):  
Yao ◽  
Zhang ◽  
Yu ◽  
Zhao ◽  
Sun

The magnetic resonance sounding (MRS) method is a non-invasive, efficient and advanced geophysical method for groundwater detection. However, the MRS signal received by the coil sensor is extremely susceptible to electromagnetic noise interference. In MRS data processing, random noise suppression of noisy MRS data is an important research aspect. We propose an approach for intensive sampling sparse reconstruction (ISSR) and kernel regression estimation (KRE) to suppress random noise. The approach is based on variable frequency sampling, numerical integration and statistical signal processing combined with kernel regression estimation. In order to realize the approach, we proposed three specific sparse reconstructions, namely rectangular sparse reconstruction, trapezoidal sparse reconstruction and Simpson sparse reconstruction. To solve the distortion of peaks and valleys after sparse reconstruction, we introduced the KRE to deal with the processed data by the ISSR. Further, the simulation and field experiments demonstrate that the ISSR-KRE approach is a feasible and effective way to suppress random noise. Besides, we find that rectangular sparse reconstruction and trapezoidal sparse reconstruction are superior to Simpson sparse reconstruction in terms of noise suppression effect, and sampling frequency is positively correlated with signal-to-noise improvement ratio (SNIR). In one case of field experiment, the standard deviation of noisy MRS data was reduced from 1200.80 nV to 570.01 nV by the ISSR-KRE approach. The proposed approach provides theoretical support for random noise suppression and contributes to the development of MRS instrument with low power consumption and high efficiency. In the future, we will integrate the approach into MRS instrument and attempt to utilize them to eliminate harmonic noise from power line.


Electronics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1254
Author(s):  
Tingting Lin ◽  
Xiaokang Yao ◽  
Sijia Yu ◽  
Yang Zhang

As an advanced groundwater detection method, magnetic resonance sounding (MRS) has received more and more attention. However, the biggest challenge is that MRS measurements always suffer with a bad signal-to-noise ratio (SNR). Aiming at the problem of noise interference in MRS measurement, we propose a novel noise-suppression approach based on the combination of data acquisition and multi-frame spectral subtraction (DA-MFSS). The pure ambient noise from the measurement area is first collected by the receiving coil, and then the noisy MRS signal is recorded following the pulse moments transmitting. The procedure of the pure noise and the noisy MRS signal acquisition will be repeated several times. Then, the pure noise and the noisy signal are averaged to preliminarily suppress the noise. Secondly, the averaged pure noise and the noisy signal are divided into multiple frames. The framed signal is transformed into the frequency domain and the spectral subtraction method is applied to further suppress the electromagnetic noise embedded in the noisy MRS signal. Finally, the de-noised signal is recovered by the overlap-add method and inverse Fourier transformation. The approach was examined by numerical simulation and field measurements. After applying the proposed approach, the SNR of the MRS data was improved by 16.89 dB and both the random noise and the harmonic noise were well suppressed.


2021 ◽  
Vol 11 (6) ◽  
pp. 2582
Author(s):  
Lucas M. Martinho ◽  
Alan C. Kubrusly ◽  
Nicolás Pérez ◽  
Jean Pierre von der Weid

The focused signal obtained by the time-reversal or the cross-correlation techniques of ultrasonic guided waves in plates changes when the medium is subject to strain, which can be used to monitor the medium strain level. In this paper, the sensitivity to strain of cross-correlated signals is enhanced by a post-processing filtering procedure aiming to preserve only strain-sensitive spectrum components. Two different strategies were adopted, based on the phase of either the Fourier transform or the short-time Fourier transform. Both use prior knowledge of the system impulse response at some strain level. The technique was evaluated in an aluminum plate, effectively providing up to twice higher sensitivity to strain. The sensitivity increase depends on a phase threshold parameter used in the filtering process. Its performance was assessed based on the sensitivity gain, the loss of energy concentration capability, and the value of the foreknown strain. Signals synthesized with the time–frequency representation, through the short-time Fourier transform, provided a better tradeoff between sensitivity gain and loss of energy concentration.


2021 ◽  
Vol 113 (1-2) ◽  
pp. 585-603
Author(s):  
Wenderson N. Lopes ◽  
Pedro O. C. Junior ◽  
Paulo R. Aguiar ◽  
Felipe A. Alexandre ◽  
Fábio R. L. Dotto ◽  
...  

Author(s):  
Rahul Balamurugan ◽  
Fatima Al-Janahi ◽  
Oumaima Bouhali ◽  
Sawsan Shukri ◽  
Kais Abdulmawjood ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document