scholarly journals Chicken Feather Ash (CFA) as a Partial Replacement of Cement in Concrete

2021 ◽  
pp. 130-140
Author(s):  
Victor Emeka Amah ◽  
Ejikeme Ugwoha ◽  
Jahswill Macaulay
Keyword(s):  
Compressive Strength ◽  
Partial Replacement ◽  
Chicken Feather ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Chicken Feathers ◽  
Allowable Range ◽  
Full Factorial ◽  
Optimum Water ◽  
Curing Age

Every day, large quantities of chicken feathers are disposed of as waste at markets where birds are slaughtered and sold for meat. The possibility of using Chicken feather ash (CFA) as a partial replacement of cement in the concrete making was investigated. Water-cement ratio and percentage CFA used for replacement were chosen as variables in the design of the experiment. Compressive strength and workability were chosen as the required responses to observe and analyzed using response surface methodology. Full factorial design was used for the design of experiment, with CFA replacement and water-cement ratio ranging from 2 – 11% and 0.3 – 0.7 % by mass respectively. There were 27 trial mixes and the freshly made concrete mix was tested for workability. Concrete cubes were molded and cured for 7 and 14 days and were crushed to determine the compressive strength. It was found that as the CFA percentage increases, the workability of the concrete increases making it more fluid. The optimum water-cement ratio was observed to range from 0.49 to 0.51 % as the curing age increases. The optimum compressive strength was observed to range from 15.6 to 18.6 N/mm2 as the curing age increased. However, the allowable range of CFA to be used for concrete making is 3.8 to 6.34 % beyond which compressive strength reduces.

scholarly journals SUITABILITY OF BURNT AND CRUSHED COW BONES AS PARTIAL REPLACEMENT FOR FINE AGGREGATE IN CONCRETE

2017 ◽  
Vol 36 (3) ◽  
pp. 686-690
Author(s):  
NM Ogarekpe ◽  
JC Agunwamba ◽  
FO Idagu ◽  
ES Bejor ◽  
OE Eteng ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Fine Aggregates ◽  
Concrete Mix ◽  
Average Compressive Strength ◽  
Curing Age

The suitability of burnt and crushed cow bones (BCCB) as partial replacement for fine aggregate in concrete was studied. The percentages of replacements of fine aggregates of 0, 10, 20, 30, 40 and 50%, respectively of BCCB were tested considering 1: 2: 4 and 1: 11/2 :3 concrete mix ratios. The cow bones were burnt for 50 minutes up to 92oC before being crushed. Ninety-six (96) concrete cubes of 1: 2: 4 mix ratio and ninety-six (96) concrete cubes of 1 : : 3 mix ratio measuring 150x150x150mm were tested for the compressive strength at 7, 14, 21 and 28 days respectively. The research revealed that the BCCB acted as a retarder in the concrete. Water-cement ratio increased with the increase in the percentage of the BCCB. The mixes of 1:2:4 and 1::3 at 28 days curing yielded average compressive strengths in N/mm2 ranging from 16.49 - 24.29 and 18.71 - 29.73, respectively. For the mix ratios of 1:2:4 and 1:: 3 at 28 days curing age,  it was observed that increase in the BCCB content beyond 40 and 50%, respectively resulted to the reduction of the average compressive strength below recommended minimum strength for use of concrete in structural works.http://dx.doi.org/10.4314/njt.v36i3.4

scholarly journals Strength Characteristics of Groundnut Leaf/Stem Ash (GLSA) Concrete

2016 ◽  
Vol 24 (3) ◽  
pp. 36-43
Author(s):  
O. W. Oseni ◽  
M. T. Audu
Keyword(s):  
Compressive Strength ◽  
Strength Properties ◽  
Strength Characteristics ◽  
Partial Replacement ◽  
Structural Elements ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Coarse Aggregates ◽  
Flow Test ◽  
Pozzolanic Properties

Abstract The compressive strength properties of concrete are substantial factors in the design and construction of concrete structures. Compressive strength directly affects the degree to which the concrete can be able to carry a load over time. These changes are complemented by deflections, cracks etc., in the structural elements of concrete. This research investigated the effect of groundnut leaf/stem ash (GLSA) on the compressive strength of concrete at 0%, 5 %, 10 % and 15 % replacements of cement. The effect of the water-cement ratio on properties such as the compressive strength, slump, flow and workability properties of groundnut leaf/stem ash (GLSA) mixes with OPC were evaluated to determine whether they are acceptable for use in concrete structural elements. A normal concrete mix with cement at 100 % (i.e., GLSA at 0%) with concrete grade C25 that can attain an average strength of 25 N/mm2 at 28 days was used as a control at design water-cement ratios of 0.65 and grading of (0.5-32) mm from fine to coarse aggregates was tested for: (1) compressive strength, and the (2) slump and flow Test. The results and observations showed that the concrete mixes from GLSA at 5 – 15 % ratios exhibit: pozzolanic properties and GLSA could be used as a partial replacement for cement at these percentage mix ratios compared with the control concrete; an increase in the water-cement ratio showed a significant decrease in the compressive strength and an increase in workability. Therefore, it is important that all concrete mixes exude an acceptably designed water-cement ratio for compressive strength characteristics for use in structures, water-cement ratio is a significant factor.

scholarly journals Modeling Fly Ash and Water Cement Ratio Influence on High Compressive Strength of Concrete

2020 ◽  
Vol 4 (1) ◽  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Modeling And Simulation ◽  
High Strength ◽  
Partial Replacement ◽  
Strength Development ◽  
Rate Variation ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Mix Proportion

This paper monitors the behaviour of compressive strength influenced by variation of water cement ratios and fly ash as partial replacement for cement. The study has express the pressure from this material from water cement ratios and fly ash on the designed mixed for high strength concrete, the study generated various compressive strength base on mixed proportions, this were applied to determine strength development at different mix proportion, such application generated compressive strength values numerically and analytically, this application was applied to compare the strength rate at every twenty four hours and that of seven days interval, the growth rate variation from the water cement ratios was applied to determine the mixed proportion to be applied that will always generate better strength, pending on the level of applied impose loads, furthermore, the study monitor increase rate of fly ash as partial replacement against the percentage dosage of fly ash content, these observed strength at optimum growth were recorded at 25%, variation increase on compressive strength from water cement ratios were between [0.23,0.40 and 0.50] it was observed that water cement ratio of [0.23] obtained the maximum strength compare to [0.40,and 0.50], the study applying modeling and simulation were subjected to model validation, and both parameters developed best fits correlations, the study has express various rate these material can develop strength applying modeling and simulation.

scholarly journals Use of Nondestructive Testing of Ultrasound and Artificial Neural Networks to Estimate Compressive Strength of Concrete

Buildings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 44
Author(s):  
Fernando A. N. Silva ◽  
João M. P. Q. Delgado ◽  
Rosely S. Cavalcanti ◽  
António C. Azevedo ◽  
Ana S. Guimarães ◽  
...  
Keyword(s):  
Neural Networks ◽  
Compressive Strength ◽  
Artificial Neural Networks ◽  
Cross Sections ◽  
Influential Factors ◽  
Average Error ◽  
Ann Model ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Artificial Neural

The work presents the results of an experimental campaign carried out on concrete elements in order to investigate the potential of using artificial neural networks (ANNs) to estimate the compressive strength based on relevant parameters, such as the water–cement ratio, aggregate–cement ratio, age of testing, and percentage cement/metakaolin ratios (5% and 10%). We prepared 162 cylindrical concrete specimens with dimensions of 10 cm in diameter and 20 cm in height and 27 prismatic specimens with cross sections measuring 25 and 50 cm in length, with 9 different concrete mixture proportions. A longitudinal transducer with a frequency of 54 kHz was used to measure the ultrasonic velocities. An ANN model was developed, different ANN configurations were tested and compared to identify the best ANN model. Using this model, it was possible to assess the contribution of each input variable to the compressive strength of the tested concretes. The results indicate an excellent performance of the ANN model developed to predict compressive strength from the input parameters studied, with an average error less than 5%. Together, the water–cement ratio and the percentage of metakaolin were shown to be the most influential factors for the compressive strength value predicted by the developed ANN model.

Study on Preparation of Solid Concrete Brick with Recycled Aggregate

2013 ◽  
Vol 648 ◽  
pp. 108-111
Author(s):  
Qi Jin Li ◽  
Guo Zhong Li
Keyword(s):  
Compressive Strength ◽  
Mass Fraction ◽  
Recycled Aggregate ◽  
Preparation Process ◽  
Mass Ratio ◽  
Construction Waste ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Optimal Value

The construction waste was processed into recycled aggregate to produce solid construction waste brick with grade of MU20. The preparation process of recycled aggregate and the optimal value of mass ratio of water to cement (water cement ratio) and mass ratio of recycled aggregate to cement was studied. The results shows that when the water cement ratio is 0.86 and the mass ratio of recycled aggregate to cement is 5.5 and the dosage of activator is 0.25% (mass fraction with recycled aggregate), the compressive strength of sample is 22.5MPa and can be satisfied with the requirement of MU20 solid concrete brick.

scholarly journals Influence of Aggregate Gradation on the Engineering Properties of Lightweight Aggregate Concrete

2018 ◽  
Vol 8 (8) ◽  
pp. 1324 ◽  
Author(s):  
How-Ji Chen ◽  
Chung-Hao Wu
Keyword(s):  
Compressive Strength ◽  
Lightweight Aggregate ◽  
Normal Weight ◽  
Engineering Properties ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Gradation ◽  
Aggregate Concrete ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Expanded Shale

Expanded shale lightweight aggregates, as the coarse aggregates, were used to produce lightweight aggregate concrete (LWAC) in this research. At the fixed water-cement ratio, paste quantity, and aggregate volume, the effects of various aggregate gradations on the engineering properties of LWAC were investigated. Comparisons to normal-weight concrete (NWC) made under the same conditions were carried out. From the experimental results, using normal weight aggregates that follow the specification requirements (standard gradation) obtained similar NWC compressive strength to that using uniform-sized aggregates. However, the compressive strength of LWAC made using small uniform-sized aggregates was superior to that made from standard-grade aggregates. This is especially conspicuous under the low water-cement ratio. Even though the workability was affected, this problem could be overcome with developed chemical additive technology. The durability properties of concrete were approximately equal. Therefore, it is suggested that the aggregate gradation requirement of LWAC should be distinct from that of NWC. In high strength LWAC proportioning, following the standard gradation suggested by American Society for Testing and Materials (ASTM) is optional.

Research on Simulation Test of Coal Similar Material

2013 ◽  
Vol 850-851 ◽  
pp. 847-850 ◽  
Author(s):  
Lin Chao Dai
Keyword(s):  
Compressive Strength ◽  
Raw Materials ◽  
Similarity Theory ◽  
Design Method ◽  
Uniform Design ◽  
Physical And Mechanical Properties ◽  
Raw Material ◽  
Similar Material ◽  
Cement Ratio ◽  
Water Cement Ratio

In order to study the coal and gas outburst similar simulation experiment, coal similar material was made up based on the similarity theory. Based on the previous similar material study, the cement, sand, water, activated carbon and coal powder was selected as the raw material of similar material. Meanwhile similar material matching program with 5 factors and 6 levels was designed by using Uniform Design Method. And the physical and mechanical properties of the similar material compressive strength was measured under different proportions circumstances. The relationship between similar material and the raw materials was analyzed. The results show that choosing different materials can compound different similar materials with different requirements. And the water-cement ratio plays a decisive influence on the compressive strength of similar material. The compressive strength of similar material decreases linearly when the water-cement ratio increases.

scholarly journals Effect of Mound Soil on Concrete Produced with River Sand

2014 ◽  
Vol 2 (1) ◽  
pp. 75-82
Author(s):  
Elivs M. Mbadike ◽  
N.N Osadebe
Keyword(s):  
Compressive Strength ◽  
Research Work ◽  
Strength Test ◽  
Control Test ◽  
River Sand ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Compressive Strength Test ◽  
Average Compressive Strength

In this research work, the effect of mound soil on concrete produced with river sand was investigated. A mixed proportion of 1.1.8:3.7 with water cement ratio of 0.47 were used. The percentage replacement of river sand with mound soil is 0%, 5%, 10%, 20%, 30% and 40%. Concrete cubes of 150mm x 150mm x150mm of river sand/mound soil were cast and cured at 3, 7, 28, 60 and 90 days respectively. At the end of each hydration period, the three cubes for each hydration period were crushed and their average compressive strength recorded. A total of ninety (90) concrete cubes were cast. The result of the compressive strength test for 5- 40% replacement of river sand with mound soil ranges from 24.00 -42.58N/mm2 a against 23.29-36.08N/mm2 for the control test (0% replacement).The workability of concrete produced with 5- 40% replacement of river sand with mound soil ranges from 47- 62mm as against 70mm for the control test.

scholarly journals Effect of Water Cement Ratios on Compressive Strength of Palm Kernel Shell Concrete

2019 ◽  
Vol 2 (Issue 1) ◽  
Author(s):  
A.O Adeyemi ◽  
M.A Anifowose ◽  
I.O Amototo ◽  
S.A Adebara ◽  
M.Y Olawuyi
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Fresh Concrete ◽  
Palm Kernel ◽  
Hardened Concrete ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Palm Kernel Shell ◽  
Compressive Strength Of Concrete ◽  
Palm Kernel Shells

This study examined the effect of varying water cement ratio on the compressive strength of concrete produced using palm kernel shell (PKS) as coarse aggregate at different replacement levels. The replacement levels of coarse aggregate with palm kernel shells (PKS) were 0%, 25%, 50%, and 100% respectively. PKS concrete cubes (144 specimens) of sizes 150mm x 150mm x 150mm were cast and cured in water for 7, 14, 21 and 28 days respectively. A mix ratio of 1:2:4 was adopted with water-cement ratio of 0.45, 0.5, and 0.6 respectively while the batching was done by weight. Slump test was conducted on fresh concrete while compressive strength test was carried out on the hardened concrete cubes using a compression testing machine of 2000kN capacity. The result of tests on fresh concrete shows that the slump height of 0.45 water cement ratio (w/c) increases with an increase in PKS%. This trend was similar to 0.50 and 0.60 w/c. However, the compressive strength of concrete cube decreases with an increase in w/c (from 0.45 to 0.60) but increases with respect to curing age and also decreases with increase in PKS%. Concrete with 0.45 water-cement ratio possess the highest compressive strength. It was observed that PKS is not a good substitute for coarse aggregate in mix ratio 1:2:4 for concrete productions. Hence, the study suggest the use of chemical admixture such as superplasticizer or calcium chloride in order to improve the strength of palm kernel shells-concrete.

Sign in / Sign up

Export Citation Format

Share Document