Interfibril hydrogen bonding improves the strain-rate response of natural armour

Fish scales are laminated composites that consist of plies of unidirectional collagen fibrils with twisted-plywood stacking arrangement. Owing to their composition, the toughness of scales is dependent on the intermolecular bonding within and between the collagen fibrils. Adjusting the extent of this bonding with an appropriate stimulus has implications for the design of next-generation bioinspired flexible armours. In this investigation, scales were exposed to environments of water or a polar solvent (i.e. ethanol) to influence the extent of intermolecular bonding, and their mechanical behaviour was evaluated in uniaxial tension and transverse puncture. Results showed that the resistance to failure of the scales increased with loading rate in both tension and puncture and that the polar solvent treatment increased both the strength and toughness through interpeptide bonding; the largest increase occurred in the puncture resistance of scales from the tail region (a factor of nearly 7×). The increase in strength and damage tolerance with stronger intermolecular bonding is uncommon for structural materials and is a unique characteristic of the low mineral content. Scales from regions of the body with higher mineral content underwent less strengthening, which is most likely the result of interference posed by the mineral crystals to intermolecular bonding. Overall, the results showed that flexible bioinspired composite materials for puncture resistance should enrol constituents and complementary processing that capitalize on interfibril bonds.

Biomimetic twisted plywood structural materials

Biomimetic designs based on micro/nanoscale manipulation and scalable fabrication are expected to develop new-style strong, tough structural materials. Although the mimicking of nacre-like ‘brick-and-mortar’ structure is well studied, many highly ordered natural architectures comprising 1D micro/nanoscale building blocks still elude imitation owing to the scarcity of efficient manipulation techniques for micro/nanostructural control in practical bulk counterparts. Herein, inspired by natural twisted plywood structures with fascinating damage tolerance, biomimetic bulk materials that closely resemble natural hierarchical structures and toughening mechanisms are successfully fabricated through a programmed and scalable bottom-up assembly strategy. By accurately engineering the arrangement of 1D mineral micro/nanofibers in biopolymer matrix on the multiscale, the resultant composites display optimal mechanical performance, superior to many natural, biomimetic and engineering materials. The design strategy allows for precise micro/nanostructural control at the macroscopic 3D level and can be easily extended to other materials systems, opening up an avenue for many more micro/nanofiber-based biomimetic designs.

Bioinspired Bouligand cellulose nanocrystal composites: a review of mechanical properties

The twisted plywood, or Bouligand, structure is the most commonly observed microstructural motif in natural materials that possess high mechanical strength and toughness, such as that found in bone and the mantis shrimp dactyl club. These materials are isotropically toughened by a low volume fraction of soft, energy-dissipating polymer and by the Bouligand structure itself, through shear wave filtering and crack twisting, deflection and arrest. Cellulose nanocrystals (CNCs) are excellent candidates for the bottom-up fabrication of these structures, as they naturally self-assemble into ‘chiral nematic’ films when cast from solutions and possess outstanding mechanical properties. In this article, we present a review of the fabrication techniques and the corresponding mechanical properties of Bouligand biomimetic CNC nanocomposites, while drawing comparison to the performance standards set by tough natural composite materials. This article is part of a discussion meeting issue ‘New horizons for cellulose nanotechnology’.

High Resolution Scanning Electron Microscope Examination of the Fish Scale: Inspiration for Novel Biomaterials

A Scanning Electron Microscopic study on the fish scale of Cyprinus carpio communis (freshwater carp), depicts remarkable structural and compositional characteristics which may be used as inspiration for novel biomaterial design. The fracture surface structure and sintered fish scale reveals an osseous layer on its dorsal side. It has a compact heterogeneous crystalloid-like structure of assorted shapes and sizes. The ventral side is made of orthogonally arranged mineralized needle like crystalloids template embedded in a fibrillary plate. Frozen scales revealed that this dorsal layer may contain high atomic number elements as it appeared bright with back scattered electron signals. The ventral side consists of collagen plates and a matrix, which are arranged orthogonally in a double-twisted, plywood-like structure. There are alternate crystalloid and matrix which are arranged orthogonally and forming 15-17 layers in between these two sides. This provides useful information of scale composition. Design features from the structure of the fish scale may be useful in the development of functional biomaterials, in various different fields including nano-composites, biopolymers and natural source of hydroxyapatite, used in applied therapeutic, pharmaceutical industries and semiconductor technology. The tolerance of the fish scale to high temperature and very low temperature cooling revealed unique characteristics for biomaterial fabrication. The orthogonally arranged ventral side plates of collagen embedded in proteoglycans may also prove to be a good source of scaffold material for cell culturing for tissue engineering.

Allocation of CaC03 Polymorphs in Biological Systems: A Confocal Raman-AFM Study

Biological composites have attracted increasing interest because of their outstanding properties and versatility. Crustaceans are interesting models for the study of these materials. They have a mineralized exoskeleton (cuticle) that provides support and protection. The structural organization of the cuticle is ubiquitous in arthropods: a hierarchically structured organic matrix composed of planes of parallel chitin-protein fibers that are stacked in a twisted plywood organization [1] associated with various amounts of minerals. The land-dwelling crustacean Porcellioscaber (P. scaber) is a well-established model organism for the study of the bio-mineralization processes [2, 3].

Mechanical Properties of the Lobster Cuticle

We present experiments on the mechanical and structural gradients through the cuticle of homarus americanus (lobster). The exocuticle (outer layer) is characterized by a very fine woven structure of the chitin-protein matrix (Bouligand structure) and by a high stiffness (8.5–9.5 GPa). The hardness increases within the exocuticle between the surface region (130 MPa) and the region close to the interface to the endocuticle (270 MPa). In the endocuticle which is characterized by a much coarser twisted plywood (Bouligand) structure both, the stiffness (3–4.5 GPa) and hardness (30–55 MPa) are much smaller than in the exocuticle. The transition in mechanical properties and structure between the exo- and endocuticle is abrupt.