Effect of Surfactant Type on Synthesis and Characteristics of Nanonickel Hydroxide

Nickel hydroxide has a vital role in various applications, especially as a support material for energy storage materials. Nickel hydroxide can be synthesized through the hydroxide precipitation method. However, the product formed by this method may be large or more than 100 nm because the agglomeration step can occur easily. This present work aims to study the effect of surfactant types in the synthesis and characterization of nickel hydroxide nanoparticle. Nickel sulfate (NiSO4) solution was used as a precursor solution, while 5M sodium hydroxide (NaOH) solution was used as a precipitation agent. The surfactants studied were alkyl benzene sulfonate (ABS), sodium dodecyl sulfate (SDS), cetyltrimethylammonium bromide (CTAB), and polyvinylpyrrolidone (PVP). The nickel hydroxide synthesis process was carried out at 50 oC for 1 hour. The surfactant concentration used was at the critical micelle concentration (CMC), where the CMC for ABS, SDS, CTAB, and PVP were 0.01; 0.05; 3; and 0.5 %w/v, respectively. The synthesis of nickel hydroxide nanoparticle was carried out successfully precipitated almost 100% of Ni2+ ions. The product characterization that has been carried out shows that ABS surfactant produces the best nickel hydroxide nanoparticle product where the particle size is 3.12–4.47 nm.

Efficiency definition of the deposition process of electrochromic Ni(OH)2-PVA films formed on a metal substrate from concentrated solutions

Electrochemical devices based on nickel hydroxide electrodes are used in different areas. The main ones are chemical current sources, variable transparency “smart” windows, devices for carrying out electrocatalytic reactions, sensors for determining various substances. In this regard, methods of nickel hydroxide synthesis are of great interest, especially those that allow forming nickel hydroxide directly on the surface of electrodes. One of these methods is electrochemical deposition with cathodic current polarization. The available information on nickel hydroxide synthesis from nickel solutions was considered. It was shown that the available data mainly covered information on dilute solutions from 0.01 to 0.25 mol/L Ni(NO3)2. In addition, no comparison was found in the literature for the efficiency of the cathodic formation of Ni(OH)2 at different concentrations of nickel nitrate. To eliminate the lack of information, the dependence of the current efficiency on the concentration of nickel nitrate in the electrodeposition solution was determined at a constant cathode current density of 0.625 mA/cm2. The resulting dependence decreased nonlinearly with increasing concentration. The nickel hydroxide deposit formed in this case had an X-ray amorphous structure, and it depended little on the Ni(NO3)2 concentration. In addition, the current efficiency reached zero at concentrations of 1.5 mol/L Ni(NO3)2 and higher. However, with polyvinyl alcohol in the solution and at Ni(NO3)2 concentrations of 1.5 and 2 mol/L, electrochemically and electrochromically active Ni(OH)2 films were deposited. The current efficiency calculated indirectly for 1.5 and 2 mol/L Ni(NO3)2 solutions was 3.2 and 2.3 %, respectively. Thus, it was concluded that polyvinyl alcohol affected the mechanism of nickel hydroxide electrodeposition from aqueous solutions of nickel nitrate.