Efficiency definition of the deposition process of electrochromic Ni(OH)2-PVA films formed on a metal substrate from concentrated solutions

Electrochemical devices based on nickel hydroxide electrodes are used in different areas. The main ones are chemical current sources, variable transparency “smart” windows, devices for carrying out electrocatalytic reactions, sensors for determining various substances. In this regard, methods of nickel hydroxide synthesis are of great interest, especially those that allow forming nickel hydroxide directly on the surface of electrodes. One of these methods is electrochemical deposition with cathodic current polarization. The available information on nickel hydroxide synthesis from nickel solutions was considered. It was shown that the available data mainly covered information on dilute solutions from 0.01 to 0.25 mol/L Ni(NO3)2. In addition, no comparison was found in the literature for the efficiency of the cathodic formation of Ni(OH)2 at different concentrations of nickel nitrate. To eliminate the lack of information, the dependence of the current efficiency on the concentration of nickel nitrate in the electrodeposition solution was determined at a constant cathode current density of 0.625 mA/cm2. The resulting dependence decreased nonlinearly with increasing concentration. The nickel hydroxide deposit formed in this case had an X-ray amorphous structure, and it depended little on the Ni(NO3)2 concentration. In addition, the current efficiency reached zero at concentrations of 1.5 mol/L Ni(NO3)2 and higher. However, with polyvinyl alcohol in the solution and at Ni(NO3)2 concentrations of 1.5 and 2 mol/L, electrochemically and electrochromically active Ni(OH)2 films were deposited. The current efficiency calculated indirectly for 1.5 and 2 mol/L Ni(NO3)2 solutions was 3.2 and 2.3 %, respectively. Thus, it was concluded that polyvinyl alcohol affected the mechanism of nickel hydroxide electrodeposition from aqueous solutions of nickel nitrate.

Effects of Precursors and Carbon Nanotubes on Electrochemical Properties of Electrospun Nickel Oxide Nanofibers-Based Supercapacitors

Supercapacitors have been considered as one of the main energy storage devices. Recently, electrospun nanofibers have served as promising supercapacitor electrodes because of their high surface area, high porosity, flexibility, and resistance to aggregation. Here, we investigate the effects of electrospinning parameters and nickel precursors on the nanostructure of electrospun nickel oxide (NiO), as well as on their electrochemical performance as supercapacitor electrodes. In contrast to the case of using nickel nitrate, increasing the nickel acetate molar concentration maintains the flexible fibrous sheet morphology of the as-spun sample during the polycondensation and calcination of NiO. As a result, our flexible electrode of NiO nanofibers derived from nickel acetate (NiO-A) exhibits much better electrochemical performance values than that of nickel nitrate-derived NiO. To further improve the electrochemical storage performance, we combined NiO-A nanofibers with single-walled carbon nanotubes (CNTs) as a hybrid electrode. In both half-cell and full-cell configurations, the hybrid electrode displayed a higher and steadier areal capacitance than the NiO-A nanofibers because of the synergetic effect between the NiO-A nanofibers and CNTs. Altogether, this work demonstrates the potency of the hybrid electrodes combined with the electrospun NiO-A nanofibers and CNTs for supercapacitor applications.

Highly efficient non-noble metallic NiCu nanoalloy catalysts for hydrogenation of nitroarenes

Highly dispersed NiCu alloy nanoparticles supported on carbon-doped silica (NiCu/C@SiO2) were first prepared through the one-step impregnation with a mixed solution of nickel nitrate, cupric nitrate and glucose, followed by...

Magnetic palladium nickel carbon nano-composite as a heterogeneous catalyst for the synthesis of distyrylbenzene and biphenyl derivatives

The magnetic palladium nickel carbon (Fe3O4@Pd@Ni/C) nano-composite has been synthesized in a simple one-pot procedure via a hydrothermal approach. Ferric nitrate, palladium acetate, and nickel nitrate were dissolved in water...