Cationic ring-opening polymerization of a five membered cyclic dithiocarbonate having a tertiary amine moiety

A dibenzylamine derived cyclic dithiocarbonate (1) undergoes ring-opening polymerization due to the greater reactivity of exocyclic sulfur compared to the tertiary amine with methyl triflate.

Determination of the Degree of Crystallinity of Poly(2-methyl-2-oxazoline)

A new method for purification of 2-methyl-2-oxazoline using citric acid was developed and living cationic ring-opening polymerization of 2-methyl-2-oxazoline was carried out. Polymerization was conducted in acetonitrile using benzyl chloride—boron trifluoride etherate initiating system. According to DSC data, the temperature range of melting of the crystalline phase of the resulting polymer was 95–180 °C. According to small-angle X-ray scattering and wide-angle X-ray diffraction data, the degree of crystallinity of the polymer was 12%. Upon cooling of the polymer melt, the polymer became amorphous. Using thermogravimetric analysis, it was found that the thermal destruction of poly(2-methyl-2-oxazoline) started above 209 °C.

Novel Amphiphilic Star-Shaped Poly(2-Oxazoline)s with Calix[4]Arene Branching Center

Novel amphiphlic four-arm star-shaped poly (2-alkyl-2-oxazoline) s with calix [4] arene core were synthesized using the “grafting from” approach. The chlorosulfonated calix [4] arene derivative was synthesized and successfully applied as a multifunctional initiator for the cationic ring-opening polymerization of 2-alkyl-2-oxazolines. Obtained star-shaped poly (2-alkyl-2-oxazoline) s were characterized by means of NMR, UV-Vis spectroscopy and gel-permeation chromatography. It was shown that star-shaped poly (2-isopropyl-2-oxazoline) perform thermosensitivity in aqueous solutions.

Chemically recyclable thermoplastics from reversible-deactivation polymerization of cyclic acetals

Identifying plastics capable of chemical recycling to monomer (CRM) is the foremost challenge in creating a sustainable circular plastic economy. Polyacetals are promising candidates for CRM but lack useful tensile strengths owing to the low molecular weights produced using current uncontrolled cationic ring-opening polymerization (CROP) methods. Here, we present reversible-deactivation CROP of cyclic acetals using a commercial halomethyl ether initiator and an indium(III) bromide catalyst. Using this method, we synthesize poly(1,3-dioxolane) (PDXL), which demonstrates tensile strength comparable to some commodity polyolefins. Depolymerization of PDXL using strong acid catalysts returns monomer in near-quantitative yield and even proceeds from a commodity plastic waste mixture. Our efficient polymerization method affords a tough thermoplastic that can undergo selective depolymerization to monomer.

Cationic Polymerization of Hexamethylcyclotrisiloxane in Excess Water

Ring-opening ionic polymerization of cyclosiloxanes in dispersed media has long been discovered, and is nowadays both fundamentally studied and practically used. In this short communication, we show some preliminary results on the cationic ring-opening polymerization of hexamethylcyclotrisiloxane (D3), a crystalline strained cycle, in water. Depending on the catalyst or/and surfactants used, polymers of various molar masses are prepared in a straightforward way. Emphasis is given here on experiments conducted with tris(pentafluorophenyl)borane (BCF), where high-molar polymers were generated at room temperature. In surfactant-free conditions, µm-sized droplets are stabilized by silanol end-groups of thus generated amphiphilic polymers, the latter of which precipitate in the course of reaction through chain extension. Introducing various surfactants in the recipe allows generating smaller emulsions in size with close polymerization ability, but better final colloidal stability, at the expense of low small cycles’ content. A tentative mechanism is finally proposed.

Synthesis of optically inactive cellulose via cationic ring-opening polymerization

Cellulose, which comprises D-glucose and L-glucose (D,L-cellulose), was synthesized from D-glucose (1D) and L-glucose (1L) via cationic ring-opening polymerization. Specifically, the ring-opening copolymerization of 3-O-benzyl-2,6-di-O-pivaloyl-β-D-glucopyranoside (2D) and 3-O-benzyl-2,6-di-O-pivaloyl-β-D-glucopyranoside (2L), synthesized from compounds 1D and 1L, respectively, in a 1:1 ratio, afforded 3-O-benzyl-2,6-di-O-β-D,L-glucopyranan (3DL) with a degree of polymerization (DPn) of 28.5 (Mw/Mn = 1.90) in quantitative yield. The deprotection of compound 3DL and subsequent acetylation proceeded smoothly to afford acetylated compound 4DL with a DPn of 18.6 (Mw/Mn = 2.08). The specific rotation of acetylated compound 4DL was + 0.01°, suggesting that acetylated compound 4DL was optically inactive cellulose triacetate. Furthermore, before acetylation, compound 4DL was an optically inactive cellulose comprising an almost racemic mixture of D-glucose and L-glucose. Compound 4DL was an amorphous polymer. This is the first reported synthesis of optically inactive D,L-cellulose.

Lignin-Based Polyols with Controlled Microstructure by Cationic Ring Opening Polymerization

Lignin-based polyols (LBPs) with controlled microstructure were obtained by cationic ring opening polymerization (CROP) of oxiranes in an organosolv lignin (OL) tetrahydrofuran (THF) solution. The control on the microstructure and consequently on the properties of the LBPs such as hydroxyl number, average molecular weight, melting, crystallization and decomposition temperatures, are crucial to determine the performance and application of the derived-products. The influence of key parameters, for example, molar ratio between the oxirane and the hydroxyl groups content in OLO, initial OL concentration in THF, temperature, specific flow rate and oxirane nature has been investigated. LBPs with hydroxyl numbers from 35 to 217 mg KOH/g, apparent average Mw between 5517 and 52,900 g/mol and melting temperatures from −8.4 to 18.4 °C were obtained. The CROP procedure allows obtaining of tailor-made LBPs for specific applications in a very simple way, opening the way to introduce LBPs as a solid alternative to substitute currently used fossil-based polyols.