A New Wearable System for Sensing Outdoor Environmental Conditions for Monitoring Hyper-Microclimate

The rapid urbanization process brings consequences to urban environments, such poor air quality and the urban heat island issues. Due to these effects, environmental monitoring is gaining attention with the aim of identifying local risks and improving cities’ liveability and resilience. However, these environments are very heterogeneous, and high-spatial-resolution data are needed to identify the intra-urban variations of physical parameters. Recently, wearable sensing techniques have been used to perform microscale monitoring, but they usually focus on one environmental physics domain. This paper presents a new wearable system developed to monitor key multidomain parameters related to the air quality, thermal, and visual domains, on a hyperlocal scale from a pedestrian’s perspective. The system consisted of a set of sensors connected to a control unit settled on a backpack and could be connected via Wi-Fi to any portable equipment. The device was prototyped to guarantee the easy sensors maintenance, and a user-friendly dashboard facilitated a real-time monitoring overview. Several tests were conducted to confirm the reliability of the sensors. The new device will allow comprehensive environmental monitoring and multidomain comfort investigations to be carried out, which can support urban planners to face the negative effects of urbanization and to crowd data sourcing in smart cities.

Continuous ergonomic risk perception for manual assembly operations using wearable multi-sensor posture estimation

Purpose This paper aims to perform the real-time and accurate ergonomics analysis for the operator in the manual assembly, with the purpose of identifying potential ergonomic injuries when encountering labor-excessive and unreasonable assembly operations. Design/methodology/approach Instead of acquiring body data for ergonomic evaluation by arranging many observers around, this paper proposes a multi-sensor based wearable system to track worker’s posture for a continuous ergonomic assessment. Moreover, given the accurate neck postural data from the shop floor by the proposed wearable system, a continuous rapid upper limb assessment method with robustness to occasional posture changes, is proposed to evaluate the neck and upper back risk during the manual assembly operations. Findings The proposed method can retrieve human activity data during manual assembly operations, and experimental results illustrate that the proposed work is flexible and accurate for continuous ergonomic assessments in manual assembly operations. Originality/value Based on the proposed multi-sensor based wearable system for posture acquisition, a real-time and high-precision ergonomics analysis is achieved with the postural data arrived continuously, it can provide a more objective indicator to assess the ergonomics during manual assembly.

Design of a Novel Wearable System for Foot Clearance Estimation

Trip-related falls are one of the major causes of injury among seniors in Canada and can be attributable to an inadequate Minimum Toe Clearance (MTC). Currently, motion capture systems are the gold standard for measuring MTC; however, they are expensive and have a restricted operating area. In this paper, a novel wearable system is proposed that can estimate different foot clearance parameters accurately using only two Time-of-Flight (ToF) sensors located at the toe and heel of the shoe. A small-scale preliminary study was conducted to investigate the feasibility of foot clearance estimation using the proposed wearable system. We recruited ten young, healthy females to walk at three self-selected speeds (normal, slow, and fast) while wearing the system. Our data analysis showed an average correlation coefficient of 0.94, 0.94, 0.92 for the normal, slow, and fast speed, respectively, when comparing the ToF signals with motion capture. The ANOVA analysis confirmed these results further by revealing no statistically significant differences between the ToF signals and motion capture data for most of the gait parameters after applying the newly proposed foot angle and offset compensation. In addition, the proposed system can measure the MTC with an average Mean Error (ME) of −0.08 ± 3.69 mm, −0.12 ± 4.25 mm, and −0.10 ± 6.57 mm for normal, slow, and fast walking speeds, respectively. The proposed affordable wearable system has the potential to perform real-time MTC estimation and contribute to future work focused on minimizing tripping risks.

A multi-point heart rate monitoring using a soft wearable system based on fiber optic technology

Early diagnosis can be crucial to limit both the mortality and economic burden of cardiovascular diseases. Recent developments have focused on the continuous monitoring of cardiac activity for a prompt diagnosis. Nowadays, wearable devices are gaining broad interest for a continuous monitoring of the heart rate (HR). One of the most promising methods to estimate HR is the seismocardiography (SCG) which allows to record the thoracic vibrations with high non-invasiveness in out-of-laboratory settings. Despite significant progress on SCG, the current state-of-the-art lacks both information on standardized sensor positioning and optimization of wearables design. Here, we introduce a soft wearable system (SWS), whose novel design, based on a soft polymer matrix embedding an array of fiber Bragg gratings, provides a good adhesion to the body and enables the simultaneous recording of SCG signals from multiple measuring sites. The feasibility assessment on healthy volunteers revealed that the SWS is a suitable wearable solution for HR monitoring and its performance in HR estimation is strongly influenced by sensor positioning and improved by a multi-sensor configuration. These promising characteristics open the possibility of using the SWS in monitoring patients with cardiac pathologies in clinical (e.g., during cardiac magnetic resonance procedures) and everyday life settings.

A Brake-Based Overground Gait Rehabilitation Device for Altering Propulsion Impulse Symmetry

This paper introduces a new device for gait rehabilitation, the gait propulsion trainer (GPT). It consists of two main components (a stationary device and a wearable system) that work together to apply periodic stance-phase resistance as the user walks overground. The stationary device provides the resistance forces via a cable that tethers the user’s pelvis to a magnetic-particle brake. The wearable system detects gait events via foot switches to control the timing of the resistance forces. A hardware verification test confirmed that the GPT functions as intended. We conducted a pilot study in which one healthy adult and one stroke survivor walked with the GPT with increasing resistance levels. As hypothesized, the periodic stance-phase resistance caused the healthy participant to walk asymmetrically, with greatly reduced propulsion impulse symmetry; as GPT resistance increased, the walking speed also decreased, and the propulsion impulse appeared to increase for both legs. In contrast, the stroke participant responded to GPT resistance by walking faster and more symmetrically in terms of both propulsion impulse and step length. Thus, this paper shows promising results of short-term training with the GPT, and more studies will follow to explore its long-term effects on hemiparetic gait.

Recognition of Fine-Grained Walking Patterns Using a Smartwatch with Deep Attentive Neural Networks

Generally, people do various things while walking. For example, people frequently walk while looking at their smartphones. Sometimes we walk differently than usual; for example, when walking on ice or snow, we tend to waddle. Understanding walking patterns could provide users with contextual information tailored to the current situation. To formulate this as a machine-learning problem, we defined 18 different everyday walking styles. Noting that walking strategies significantly affect the spatiotemporal features of hand motions, e.g., the speed and intensity of the swinging arm, we propose a smartwatch-based wearable system that can recognize these predefined walking styles. We developed a wearable system, suitable for use with a commercial smartwatch, that can capture hand motions in the form of multivariate timeseries (MTS) signals. Then, we employed a set of machine learning algorithms, including feature-based and recent deep learning algorithms, to learn the MTS data in a supervised fashion. Experimental results demonstrated that, with recent deep learning algorithms, the proposed approach successfully recognized a variety of walking patterns, using the smartwatch measurements. We analyzed the results with recent attention-based recurrent neural networks to understand the relative contributions of the MTS signals in the classification process.