Influence of the initial winding displacement on the indicators of the electromechanical induction accelerator of cylindrical configuration

Purpose. The purpose of the article is to determine the influence of the initial displacement of the windings on the indicators of an electromechanical induction accelerator of a cylindrical configuration with pulsed excitation from a capacitive energy storage and with short-term excitation from an alternating voltage source. Methodology. To take into account the interrelated electrical, magnetic, mechanical and thermal processes, as well as a number of nonlinear dependencies, we use the lumped parameters of the windings, and the solutions of the equations describing these processes are presented in a recurrent form. The mathematical model of the accelerator takes into account the variable magnetic coupling between the windings during the excitation of the inductor winding. When calculating the parameters and characteristics of the accelerator, a cyclic algorithm is used. Results. At a frequency of an alternating voltage source of 50 Hz, the current amplitude in the armature winding is less than in the inductor winding. With an increase in the source frequency to 250 Hz, the phase shift between the winding currents decreases. The current in the inductor winding decreases, and in the armature winding it increases. The accelerating components of the force increase, and the braking ones decrease. With an increase in the source frequency to 500 Hz, the current density in the armature winding exceeds that in the inductor winding. In this case, the phase shift between the windings is further reduced. Originality. When a cylindrical accelerator is excited, the largest amplitude of the current density in the inductor winding occurs at the maximum initial displacement of the windings, but the amplitude of the current density in the armature winding is the smallest. The largest value of the current density in the armature winding occurs in the absence of an initial displacement. When excited from a capacitive energy storage, the electrodynamic force between the windings has an initial accelerating and subsequent braking components. As a result, the speed of the armature initially increases to a maximum value, but decreases towards the end of the electromagnetic process. When a cylindrical accelerator is excited from an alternating voltage source, a phase shift occurs between the currents in the windings, which leads to the appearance of alternating accelerating and decelerating components of electrodynamic forces. The accelerating components of the force prevail over the braking components, which ensures the movement of the armature. Practical value. At a frequency of an alternating voltage source of 50 Hz, the highest speed at the output of the accelerator vzf=0.5 m/s is realized at an initial displacement of the windings z0=6.2 mm, at a frequency of 250 Hz, the highest speed vzf=2.4 m/s is realized at z0=3.1 mm, and at a frequency of 500 Hz the highest speed vzf=2.29 m/s is realized at z0=2.3 mm.

Tower Configuration Impacts on the Thermal and Flow Performance of Steel-Truss Natural Draft Dry Cooling System

In recent years, the steel-truss natural draft dry cooling technique has received attention owing to its advantages in better aseismic capability, shorter construction period, and preferable recycling. For cooling towers generating the draft force of air flow, its configuration may impact the thermal and flow performance of the steel-truss natural draft dry cooling system. With regard to the issue, this work explored the thermal and flow characteristics for the steel-truss natural draft dry cooling systems with four typical engineering tower configurations. By numerical simulation, the pressure, flow, and temperature contours were analyzed, then air mass flow rates and heat rejections were calculated and compared for the local air-cooled sectors and overall steel-truss natural draft dry cooling systems with those four tower configurations. The results present that tower 2 with the conical/cylindrical configuration had slightly lower heat rejection compared with tower 1 with the traditional hyperbolic configuration. Tower 3 with the hyperbolic/cylindrical configuration showed better thermo-flow performances than tower 1 at high crosswinds, while tower 4 with the completely cylindrical configuration appeared to have much reduced cooling capability under various crosswind conditions, along with strongly deteriorated thermal and flow behaviors. As for engineering application of the steel-truss natural draft dry cooling system, the traditional hyperbolic tower configuration is recommended for local regions with gentle wind, while for those areas with gale wind yearly, the hyperbolic/cylindrical integrated cooling tower is preferred.

Определение параметров латерального и нестационарного шнурового токов в цилиндрическом халькогенидном стеклообразном полупроводнике

The heat-conduction equation describing the current cord in a semiconductor is approximately solved for a Ge–Sb–Te semiconductor system of cylindrical configuration. It is shown that the cord current at infinitely long times is proportional to the squared maximum temperature at the cord center and inversely proportional to the applied electric field. The scale of the lateral current perpendicular to the main cord current is estimated. It is found that the lateral current is low in comparison with the cord current; hence, the formation of lateral cords growing from the main cord is highly improbable.