Crab-inspired compliant leg design method for adaptive locomotion of a multi-legged robot

Chinese mitten crab has unique limb structures composed of a hard exoskeleton and flexible muscles. They enable the crab to locomote adaptively and safely on various terrains. In this work, we investigated the limb structures, motion principle, and gaits of the crab using a high-speed camera and a press machine. Then, a novel compliant robot leg design method is proposed, inspired by the crab limb. The leg comprises six hard scleromeres and a flexible thin-wall spring steel sheet (FSSS) mimicking the exoskeleton and muscle. The scleromeres connected one by one with rotational joints are designed with slots. The front end of the FSSS is fixed on the scleromere close to the ground. The rear end crosses the slots and is mounted at the shaft of a linear actuator installed at the rear scleromere. The leg bends and stretches when the actuator pushes and pulls the FSSS, respectively. The kinematic modeling, rigid-flexible coupling dynamic simulations, and leg prototype tests are conducted, which verify the leg design approach. Thirdly, we put forward a multi-legged robot with eight compliant legs and design its gait using the gaits of the crab. Finally, the robot’s performance is evaluated, including the capabilities of walking on different terrains at adjustable speeds and body heights, traversing low channels, walking on slopes, and carrying loads. The results prove that the single-motor-actuated compliant legs and their dynamic coupling with the rigid robot body frame can enable them to have the ground clearance ability and realize the adaptive walking of the robot. The leg design methodology can be used to design multi-legged robots with the merits of compact, light, low mechanical complexity, high safety, and easy to control, for many applications, such as environmental monitoring, search and rescue.

Underwater Crawling Robot With Hydraulic Soft Actuators

Benthic operation plays a vital role in underwater applications, where crawling robots have advantages compared with turbine-based underwater vehicles, in locomotion accuracy, actuation efficiency, current resistance, and in carrying more payloads. On the other hand, soft robots are quickly trending in underwater robotic design, with their naturally sealed body structure and intrinsic compliance both desirable for the highly unstructured and corrosive underwater environment. However, the limitations resulting directly from the inherent compliance, in structural rigidity, actuation precision, and limited force exertion capability, have also restricted soft robots in underwater applications. To date soft robots are adopted mainly as grippers and manipulators for atraumatic sampling, rather than as locomotion platforms. In this work, we present a soft-robotic approach to designing underwater crawling robots, with three main innovations: 1) using rigid structural components to strategically reinforce the otherwise omni-directionally flexible soft actuators, drastically increasing their loading capability and actuation precision; 2) proposing a rigid–soft hybrid multi-joint leg design, with quasi-linear motion range and force exertion, while maintaining excellent passive impact compliance by exploiting the inherent flexibility of soft actuators; 3) developing a novel valve-free hydraulic actuation system with peristaltic pumps, achieving a compact, lightweight, and untethered underwater crawling robot prototype with a 5:1 payload-to-weight ratio and multi-gait capability. The prototype was tested for design verification and showcasing the advantages of the proposed hybrid mechanism and actuation approach.

A Generalized Model for Compliant Passive Bipedal Walking: Sensitivity Analysis and Implications On Bionic Leg Design

The passive behavior of a compliant biped walking model, subject to variations in its design is investigated. A biped gait model is developed that allows for studying the effects of leg impedance, geometry, foot curvature and inertial properties on the stable gait performed passively. A set of non-dimensional parameters has been produced that fully defines the compass gait behavior, eliminating the dependence of our results on scale. Models emerging from parameter combinations were tested on their ability to perform stable passive walking on slope, and the characteristics of the gait performed in each case were recorded. Investigation of parameter ranges allowed us to draw relationships between various gait characteristics and specific, non-dimensional parameter selections. By mapping the changes in system behavior under simple design variations, this work facilitates the selection of design parameters at an early stage of designing bionic walking equipment, including prostheses and exoskeletons.