Motion coordination control of planar 5R parallel quadruped robot based on SCPL-CPG

The parallel leg of the quadruped robot has good structural stiffness, accurate movement, and strong bearing capacity, but it is complicated to control. To solve this problem, a series connection of parallel legs (SCPL) was proposed, as well as a control strategy combined with the central pattern generator (CPG). With the planar 5R parallel leg as the research object, the SCPL analysis method was used to analyze the leg structure. The topology of CPG network was built with the Hopf oscillator as the unit model, and the CPG was the core to model the robot control system. By continuously adjusting the parameters in the CPG control system and changing the connection weight, and the smooth transition between gaits was realized. The simulation results show that the SCPL analysis method can be effectively used in the analysis of parallel legs, and the control system can realize the smooth transition between gaits, which verifies the feasibility and effectiveness of the proposed control strategy.

Whole-body kinematic and dynamic modeling for quadruped robot under different gaits and mechanism topologies

Dynamic locomotion plays a crucial role for legged robots to fulfill tasks in unstructured environments. This paper proposes whole-body kinematic and dynamic modeling method s based on screw theory for a quadruped robot using different gaits and mechanism topologies. Unlike simplified models such as centroid or inverse pendulum models, the methods proposed here can handle 10-dimensional mass and inertia for each part. The only simplification is that foot contact models are treated as spherical joints. Models of three different mechanism topologies are formulated: (1) Standing phase: a system consisting of one end-effector, the body, and four limbs, the legs; (2) Walking phase: a system consisting of one or two lifting legs (depending on the chosen gait), two or three supporting legs; (3) Floating phase: a system in which all legs detach from the ground. Control strategies based on our models are also introduced, which includes walk and trot gait plans. In our control system, two additional types of information are provided: (1) contacting forces are given by force sensors installed under feet; (2) body poses are determined by an inertial measurement unit (IMU). Combined with the sensor data and calibrated mass, inertia, and friction, the joint torque can be estimated accurately in simulation and experiment. Our prototype, the “XiLing” robot, is built to verify the methods proposed in this paper, and the results show that the models can be solved quickly and leads to steady locomotions.

A model-based strategy for quadruped running with differentiated fore- and hind leg morphologies

This article introduces a model-based strategy for a quadruped robot with differentiated fore- and hind-leg ground reaction-force patterns to generate animal-like running behavior. The proposed model comprises a rigid body and two eSLIP legs with dampers. The eccentric-SLIP (eSLIP) model extends the traditional spring-loaded inverted pendulum (SLIP) model by adding a bar to offset the spring direction. The proposed two-leg eSLIP (TL-eSLIP) model’s fore- and hind legs were designed to have the same offset magnitude but in opposite offset directions, producing different braking and thrusting force patterns. The TL-eSLIP model’s reference leg trajectories were designed based on the fixed-point motion of the eSLIP model. Additionally, the legs were clock torque-controlled to modulate leg motion and stabilize the model to follow its natural dynamics. The model’s equations for motion were derived, and the model’s dynamic behavior was simulated and analyzed. The simulation results indicate that the model with leg offsets and in either trotting or pronking has differentiated leg force patterns, and it is more stable and has larger basins of attraction than the model without leg offsets. A quadruped robot was built for experimental validation. The experimental results demonstrate that the robot with differentiated legs ran with differentiated ground reaction force patterns and ran more stably than another robot with the same leg morphology.

Research Self-balancing UAV Takeoff and Landing Control System Based on Quadruped Robot

Aiming at the advantages of UAVs in field survey and search as well as their difficulties in taking off and landing in poor ground environment in the field, a simple self-balancing UAV take-off and landing control system based on a quadruped robot is proposed. Firstly, the simple physical model of the system is established and the mathematical analysis is carried out. Secondly, the inverse kinematics of the single leg model is derived. Thirdly, the attitude sensor is used to measure the attitude angle data of the system platform, and the Kalman filter is used in the software design to filter the attitude angle data, and the PID control algorithm is used to control each leg joint. Finally, The design is simulated by MATLAB and experimentally analyzed, and the test results meet the design requirements.