Bharat mein 1990-1999 ke dauraan shushkata visangatiyon ka kshetreey avem saamayik vishleshan

Aridity Anomaly Index (AAI), based on Thornthwaite’s water balance technique, has been used to identify the extent and persistence of aridity anomalies over 33 sub-divisions of India during a period of 10 years from 1990 to 1999. Regional and temporal analysis has been carried out to identify the areas and periods of intense and prolonged persistence. This study has shown that 1992 was worst hit by the aridity conditions, which emerged in 5 or more fortnights. All sub-divisions of north India were affected by moderate aridity during 1990, 1992-94 and 1999. Similarly, all sub-divisions of peninsular India were influenced by moderate aridity during 1991, 1993 and 1999. Severe aridity appeared in all sub-divisions of peninsular India during 1990. The duration of severe aridity was less than that of moderate aridity during all years. Moderate and severe aridity appeared simultaneously in 5 or more fortnights in maximum 9 sub-divisions in 1992 and occurred during maximum 5 years in Madhya Maharashtra. Moderate aridity in 5 or more fortnights emerged each year during 1990 to 1999 in coastal Andhra Pradesh. In 1991, maximum 55% sub-divisions were affected by severe aridity in 9th fortnight, whereas Saurashtra & Kutch was affected in 1996 and north Interior Karnataka in 1999 during maximum 7 fortnights. In the year 1992, maximum number of sub-divisions under moderate and severe persistence was 70% and 24% respectively. In north India, moderate persistence appeared in east Rajasthan in all nine years except 1996, with its longest duration of 8 fortnights in 1995. West Madhya Pradesh, in peninsular India, was affected by moderate aridity during 7 fortnights in each year during the period of study from 1990 to 1999.

Evapotranspiration and soil moisture balance in relation to yield of pearl millet (Pennisetum gIaucum)

In this study. the agrometeorological data of Hisar and Bellary have been utilized to examine evapotranspirative demand of the pearl millet at different phases during the crop growing period.Water use efficiency of the crop has also been worked out and discussted. Cumulative soil moisture balance was computed to assess the crop stress situation, Attempt has also been made to assess the moisture availability to the crop during the growing period and to estimate the yield, The study revealed that the pearl millet used maximum amount of water during the flowering stage at both locations. The same variety of pearl millet was found to use water more efficiently at Hisar than at Bellary. The yield index based on soil moisture balance technique was found to give a good indication of the yield.

Estimate Gas Initially in Place of Tight Gas Reservoirs Based on Developed Methodology of Dynamic Material Balance Technique

With growing global demand for hydrocarbons and decreasing conventional reserves, the gas industry is shifting its focus in the direction of unconventional reservoirs. Tight gas reservoirs have typically been deemed uneconomical due to their low permeability which is understood to be below 0.1mD, requiring advanced drilling techniques and stimulation to enhance hydrocarbons. However, the first step in determining the economic viability of the reservoir is to see how much gas is initially in place. Numerical simulation has been regarded across the industry as the most accurate form of gas estimation, however, is extremely costly and time consuming. The aim of this study is to provide a framework for a simple analytical method to estimate gas. Usually during production three variables are readily accessible: production rate, production time, and pressure-volume-temperature properties. This paper develops an analytical approach derived from the dynamic material balance proposing a new methodology to calculate pseudo time, with an interactive technique. This model encompasses pseudo functions accounting for pressure dependent fluid and rock variables. With the dynamic material balance yielding weak results in the linear flow regimes, an additional methodology derived from the volumetric tank model has been taken into consideration whereby equivalent drainage area is linked to total reservoir area. It has been shown even with short production data this volumetric approach yields accurate results. This proposed methodology has been validated against previous literature and additional cases considered to determine the sensitivity of each of it to reservoir parameters. Finally, it is shown that this method works for both fractured and unfractured wells in tight gas reservoirs, however, it is sensitive to the quantity of data based within the pseudo steady state flow period.

Metabolizable Protein: 2. Requirements for Maintenance in Growing Saanen Goats

This study aimed to estimate the protein requirements for the maintenance of growing Saanen goats of different sexes from 5 to 45 kg of body weight (BW) using two methods and applying a meta-analysis. For this purpose, two datasets were used. One dataset was used to evaluate the effects of sex on the protein requirements for maintenance using the comparative slaughter technique. This dataset was composed of 185 individual records (80 intact males, 62 castrated males, and 43 females) from six studies. The other dataset was used to evaluate the effects of sex on the protein requirements for maintenance using the N balance method. This dataset was composed of 136 individual records (59 intact males, 43 castrated males, and 34 females) from six studies. All studies applied an experimental design that provided different levels of N intake and different levels of N retention, allowing the development of regression equations to predict the net protein requirement for maintenance (NPM) and the metabolizable protein (MP) requirements for maintenance (MPM) in Saanen goats. The efficiency of MP use for maintenance (kPM) was computed as NPM/MPM. The efficiency of MP use for gain (kPG) was calculated using the equation of daily protein retained against daily MP intake above maintenance. A meta-analysis was applied using the MIXED procedure of SAS, in which sex was considered a fixed effect, and blocks nested in the studies and goat sex were considered as random effects. The NPM did not differ between sexes, irrespective of the approach used. The daily NPM estimated was 1.23 g/kg0.75 BW when using the comparative slaughter technique, while it was 3.18 g/kg0.75 BW when using the N balance technique for growing Saanen goats. The MPM estimated was 3.8 g/kg0.75 BW, the kPM was 0.33, and the kPG was 0.52. We observed that the NPM when using the comparative slaughter technique in growing Saanen goats is lower than that recommended by the current small ruminant feeding systems; on the other hand, the MPM was similar to previous reports by the feeding systems. Sex did not affect the protein requirements for maintenance and the efficiencies of use of metabolizable protein.

Steady State Analysis Of Single Phase IPM Motors By D-Q Harmonic Balance Method

A concise steady-state analysis of a single-phase line-start permanent magnet (SPLSPM) machine is conducted from a developed d-q model using the d-q harmonic balance technique. The d-q model was developed in rotor reference frame from a phase variable model of the machine. SPLSPM whose performance indices were characterized by high torque ripples has detailed analysis docile mostly in computer simulations quite unlike the three-phase types. The main cause is not far-fetched, it was due to nonexistence of precise mathematical model in d-q rotor frame of the motor due to the unbalanced field winding, the rotor saliency and the presence of the capacitor in the auxiliary windings. Even after model has been developed, the simple traditional procedure of setting all time varying component to zero for steady-state analysis fails because the rotor position dependence on the inductance expressions could not be eliminated. The d-q harmonic-balance technique was then applied. An important feature of the harmonic balance technique was that it decoupled all equations to simple sine waveforms in a style that resembled Fourier series. Results yield torque pulsation, current and load characteristics in the steady state.