liquid phase plasma
Recently Published Documents


TOTAL DOCUMENTS

89
(FIVE YEARS 39)

H-INDEX

12
(FIVE YEARS 5)

Crystals ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 76
Author(s):  
Ruiyu Wang ◽  
Mengfan Zhang ◽  
Hao Xu ◽  
Shuo Guo ◽  
Mengqi Chi ◽  
...  

In this study, a novel assisted liquid−phase plasma electrolysis was developed to realize one−step synthesis of popcorn biomass−derived porous carbon/cobalt tetroxide (popcorn−carbon/Co3O4) composites, effectively improving the structural stability and conductivity of Co3O4. The phase structure, morphologies, chemical composition, and weight ratio of the as−prepared popcorn−carbon/Co3O4 composites were systematically analyzed. The results of X−ray diffraction (XRD), Raman spectrometer, Fourier infrared spectrometer (FTIR), X−ray photoelectron spectrometer (XPS), and thermogravimetry analyzer (TG) proved the synthesis of the popcorn−carbon/Co3O4 composites. Co3O4 nanoparticles were distributed relatively uniformly on the popcorn−carbon surface. The electrochemical properties of the popcorn−carbon/Co3O4 composite electrode materials were analyzed for exploring the influence of different Co/C ratios on the electrochemical properties of composites. The results showed that the popcorn−carbon/Co3O4 composite electrode materials prepared under 200:1 mass ratio of Co(NO3)2·6H2O and popcorn−carbon possessed a specific capacitance and specific capacity of almost 1264 F/g (594 C/g) at a current density of 1 A/g, exhibiting a better electrochemical property. The efficient, fast, and novel assisted liquid−phase plasma electrolysis provides a new method for the preparation of composite electrode materials on the supercapacitors.


2021 ◽  
Vol 22 (24) ◽  
pp. 13591
Author(s):  
Kyong-Hwan Chung ◽  
Hyun-Hak Jung ◽  
Sun-Jae Kim ◽  
Young-Kwon Park ◽  
Sang-Chai Kim ◽  
...  

This study examined the H2 production characteristics from a decomposition reaction using liquid-phase plasma with a bismuth ferrite catalyst. The catalyst was prepared using a sol–gel reaction method. The physicochemical and optical properties of bismuth ferrite were analyzed. H2 production was carried out from a distilled water and aqueous methanol solution by direct irradiation via liquid-phase plasma. The catalyst absorbed visible-light over 610 nm. The measured bandgap of the bismuth ferrite was approximately 2.0 eV. The liquid-phase plasma emitted UV and visible-light simultaneously according to optical emission spectrometry. Bismuth ferrite induced a higher H2 production rate than the TiO2 photocatalyst because it responds to both UV and visible light generated from the liquid-phase plasma.


Nanomaterials ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 2344
Author(s):  
Byung-Joo Kim ◽  
Kay-Hyeok An ◽  
Wang-Geun Shim ◽  
Young-Kwon Park ◽  
Jaegu Park ◽  
...  

Ag particles were precipitated on an activated carbon fiber (ACF) surface using a liquid phase plasma (LPP) method to prepare a Ag/ACF composite. The efficiency was examined by applying it as an adsorbent in the acetaldehyde adsorption experiment. Field-emission scanning electron microscopy and energy-dispersive X-ray spectrometry confirmed that Ag particles were distributed uniformly on an ACF surface. X-ray diffraction and X-ray photoelectron spectroscopy confirmed that metallic silver (Ag0) and silver oxide (Ag2O) precipitated simultaneously on the ACF surface. Although the precipitated Ag particles blocked the pores of the ACF, the specific surface area of the Ag/ACF composite material decreased, but the adsorption capacity of acetaldehyde was improved. The AA adsorption of ACF and Ag/ACF composites performed in this study was suitable for the Dose–Response model.


2021 ◽  
Author(s):  
Shiori Tanaka ◽  
Shingo Kanemura ◽  
Masaki Okumura ◽  
Kazuyuki Iwaikawa ◽  
Kenichi Funamoto ◽  
...  

Abstract Surface functionalization is a key process in rendering various materials biocompatible. Whereas a number of techniques and technologies have been developed for the purpose of biofunctionalization, plasma treatment enables highly efficient surface modification. Extending plasma treatment to biomolecules in the liquid phase will control biofunctionalization via a simple process. However, interactions between plasma discharge and biomolecules or solvents are poorly understood, potentially leading to the technical limitation as to the utility of plasma treatment. In this study, we developed a technology for substrate biofunctionalization that does not require surface modification but involves direct treatment of a collagen molecules with liquid-phase plasma discharge. Biofunctionalization of collagen by plasma treatment comprises three processes that increase its reactivity with hydrophobic substrates: (1) charge-dependent changes in surface and interfacial properties of the collagen solution; (2) local conformational changes of the collagen molecules without their global structural alterations; and (3) induction of a micelle-like association formed by collagen molecules. We anticipate such plasma-induced functionalization of protein molecules to provide a versatile technique in the applications of biomaterials, including those related to pharmaceuticals and cosmetics.


2021 ◽  
Author(s):  
Shiori Tanaka ◽  
Shingo Kanemura ◽  
Masaki Okumura ◽  
Kazuyuki Iwaikawa ◽  
Kenichi Funamoto ◽  
...  

Abstract Surface functionalization is a key process in rendering various materials biocompatible. Whereas a number of techniques and technologies have been developed for the purpose of biofunctionalization, plasma treatment enables highly efficient surface modification. Extending plasma treatment to biomolecules in the liquid phase will control biofunctionalization via a simple process. However, interactions between plasma discharge and biomolecules or solvents are poorly understood, potentially leading to the technical limitation as to the utility of plasma treatment. In this study, we developed a technology for substrate biofunctionalization that does not require surface modification but involves direct treatment of a collagen molecules with liquid-phase plasma discharge. Biofunctionalization of collagen by plasma treatment comprises three processes that increase its reactivity with hydrophobic substrates: (1) charge-dependent changes in surface and interfacial properties of the collagen solution; (2) local conformational changes of the collagen molecules without their global structural alterations; and (3) induction of a micelle-like association formed by collagen molecules. We anticipate such plasma-induced functionalization of protein molecules to provide a versatile technique in the applications of biomaterials, including those related to pharmaceuticals and cosmetics.


Author(s):  
Irshad Ahmad ◽  
Shazia Shukrullah ◽  
Muhammad Y. Naz ◽  
Mukhtar Ahmad ◽  
Ejaz Ahmed ◽  
...  

Author(s):  
Zhiqiang Chen ◽  
Jieming Wang ◽  
Iuliia Onyshchenko ◽  
Yichao Wang ◽  
Christophe Leys ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document