Preparation of Fe3O4@PDA@Au@GO Composite as SERS Substrate and Its Application in the Enrichment and Detection for Phenanthrene

In this study, highly active Fe3O4@PDA@Au@GO surface-enhanced Raman spectroscopy (SERS) active substrate was synthesized for application in the enrichment and detection of trace polycyclic aromatic hydrocarbons (PAHs) in the environment. The morphology and structure were characterized by transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD) and UV–visible absorption spectrum (UV–vis spectra). The effect of each component of Fe3O4@PDA@Au@GO nanocomposites on SERS was explored, and it was found that gold nanoparticles (Au NPs) are crucial to enhance the Raman signal based on the electromagnetic enhancement mechanism, and apart from enriching the PAHs through π–π interaction, graphene oxide (GO) also generates strong chemical enhancement of Raman signals, and polydopamine (PDA) can prevent Au from shedding and agglomeration. The existence of Fe3O4 aided the quick separation of substrate from the solutions, which greatly simplified the detection procedure and facilitated the reuse of the substrate. The SERS active substrate was used to detect phenanthrene in aqueous solution with a detection limit of 10−7 g/L (5.6 × 10−10 mol/L), which is much lower than that of ordinary Raman, it is promising for application in the enrichment and detection of trace PAHs.

Dual-enhancement and dual-tag design for SERS-based sandwich immunoassays: evaluation of a metal–metal effect in 3D architecture

The design of a sandwich-type SERS immunoassay (surface-enhanced Raman spectroscopy) is demonstrated operating in dual surface enhancement and dual-tag paradigm. The capture and detection antibodies are linked to two SERS-active substrates and form together the three-dimensional (3D) structure after specific binding to interleukin 6. A variety of metal combinations is tested (Au–Ag, Au–Au, and Ag–Ag), but an enhanced electromagnetic field is generated only due to coupling of Ag and Au nanoparticles with an Au hexagonal nanoarray. The amplified in that way Raman signals improve the limit of detection over 3 times in comparison to the assay with only one SERS-active substrate. It is also shown that the proper readout of the true-positive signal can be achieved in assays with two Raman tags, and this approach also improves LOD. For the optimal combination of the metal–metal junction and Raman tags, a linear relationship between the Raman signal and the concentration of IL-6 is obtained in the range 0–1000 pg⋅mL−1with LOD of 25.2 pg mL−1and RSD < 10%. The presented proof-of-concept of the SERS immunoassay with the dual-enhancement and dual-tag opens additional opportunities for engineering reliable SERS biosensing. Graphical abstract

A Label-Free Electrochemical Immunosensor for CEA Detection on a Novel Signal Amplification Platform of Cu2S/Pd/CuO Nanocomposites

Carcinoembryonic antigen (CEA) is regarded as one of the crucial tumor markers for colorectal cancer. In this study, we developed the snowflake Cu2S/Pd/CuO nanocomposite to construct an original label-free electrochemical immunosensor for the ultrasensitive detection of CEA levels. The nanocomposite of cuprous sulfide (Cu2S) with Pd nanoparticles (Pd NPs) was synthesized through an in situ formation of Pd NPs on the Cu2S. Cuprous sulfide (Cu2S) and CuO can not only be used as a carrier to increase the reaction area but also catalyze the substrate to generate current signal. Palladium nanoparticles (Pd NPs) have excellent catalytic properties and good biocompatibility, as well as the ability of excellent electron transfer. The immunosensor was designed using 5 mmol/L H2O2 as the active substrate by optimizing the conditions with a detection range from 100 fg/ml to 100 ng/ml and a minimum detection limit of 33.11 fg/ml. The human serum was detected by electrochemical immunoassay, and the results were consistent with those of the commercial electrochemical immunosensor. Therefore, the electrochemical immunosensor can be used for the detection of human serum samples and have potential value for clinical application.

The Role of Adipokines in Cardiovascular Pathology

The recent decades saw a steady growth of obesity incidence worldwide. Obesity is an independent risk factor for cardiovascular diseases (CVDs) and type 2 diabetes mellitus and is also associated with a shorter life expectancy. Not only hemodynamic but also hormone metabolic processes, arising from excessive accumulation of adipose tissue in human body, underlie the development of CVDs. Adipose tissue has now been proved to be a hormone-active substrate. Studies of the influence of adipokines will bring us closer to understanding cardiovascular pathogenesis and help personalize prophylactic strategies.

Controllable fabrication of polymeric nanowires by NIL technique and self-assembled AAO template for SERS application

A controllable strategy to fabricate the polymeric nanowires with high throughput and low cost is developed by using the thermal nanoimprint lithography (NIL) technique and self-assembled anodic aluminum oxide (AAO) template. The length of polymeric nanowires can be controlled by adjusting the duration of thermal NIL. A fill mechanism of thermoplastic intermediate polymer stamp (IPS) polymer pressed into the AAO nanopores is closely studied. The as-prepared IPS polymeric nanowire-based Surface-Enhanced Raman Scattering (SERS)-active substrate exhibits a remarkable reproducibility. The effective adsorption of the R6G as probe molecule near to hotspots generated at 3D vertically aligned polymeric nanowire SERS active substrates shows extraordinary enhancement of Raman signal with an enhancement factor (EF) of 105–106. The present strategy is of great guiding significance to broaden the use of thermal NIL technique and AAO template for the fabrication of other nanomaterials, especially for the flexible and transparent polymer-based nanomaterials.