Force Dependent Quantum Phase Transition in the Hybrid Optomechanical System

The optomechanics shows a great potential in quantum control and precise measurement due to appropriate mechanical control. Here we theoretically study the quantum phase transition in a hybrid atom-optomechanical cavity with an external force. Our study shows, in the thermodynamic limit, the critical value of quantum phase transition between the normal phase and super-radiant phase can be controlled and modified by the external force via the tunable frequency of optomechanics, then a force dependent quantum phase transition can be achieved in our system. Moreover, this force dependent quantum phase transition can be employed to detect the external force variation. In addition, our numerical simulations illustrate the sensitivity of the external force measurement can be improved by the squeezing properties of the quantum phase transition.

A Compact Accelerator-Based Light Source for High-Power, Full-Bandwidth Tunable Coherent THz Generation

Terahertz (THz) radiation sources are increasingly significant for many scientific frontiers, while the generation of THz radiation with high-power at wide-tunable frequencies is still a limitation for most existing methods. In this paper, a compact accelerator-based light source is proposed to produce coherent THz radiation with high pulse energy and tunable frequency from 0.1 THz to 60 THz. By using a frequency beating laser-modulated electron beam and undulator taper, intense coherent THz radiation can be generated through undulators. Theoretical analysis and numerical simulations demonstrate that the proposed technique can generate narrow-bandwidth THz radiation with a pulse energy up to 6.3 millijoule (mJ) and the three-dimensional effects of beam has limited influence on its performance. The proposed technique will open up new opportunities for THz spectroscopic and time-resolved experiments.

Flexible Ultra-Wide Electro-Optic Frequency Combs for a High- Capacity Tunable 5G+ Millimeter-Wave Frequency Synthesizer

This paper presents a new scheme of a cost-effective tunable millimeter-wave (MMW) frequency synthesizer based on an ultra-wideband electro-optic frequency comb. The architecture for the quasi-tunable millimeter-wave frequency synthesizer mainly consists of a compact ultra-wide flat electro-optic frequency comb and a multi-tone frequency generator, which only includes a quantum dot mode-locked laser, a LiNbO3 dual-driving Mach–Zehnder modulator (DD-MZM) and Uni-traveling-carrier photodiode (UTC-PD). MMW signals generated with a quasi-tunable frequency are experimentally demonstrated. The difference in power is obtained for the different frequencies. The linewidth of the quasi-tunable frequency signals is less than 273 Hz. In addition, the single side band (SSB) phase noise of the 25, 37.5, 50 and 75 GHz is measured as −115, −106, −102 and −95 dBc/Hz at an offset of 1 kHz, respectively. The proposed frequency synthesizer has ultra-low phase noise, quasi-tunable frequency and simple structure. The research results of the frequency synthesizer are applied for 5G+ transmission with radio wave working at K-band and V-band. The flexible, compact and robust MMW frequency synthesizer is suitable for the future of ultra-high capacity 5G+ communication.

Acoustical Study of a Lossy Gradient-Based Sonic Crystal Using Acoustic Beamforming

Sonic crystals (SCs) are unique periodic structures designed to attenuate acoustic waves in tunable frequency bands known as bandgaps. Though previous works on conventional uniform SCs show good insertion loss (IL) inside the bandgaps, this work is focused on widening their bandgaps and achieving better IL inside the bandgaps by using a gradient-based sonic crystal (GBSC). The GBSC applies property gradient to the conventional SC array by varying its basic properties, i.e., the distance between the scatterers/resonators (lattice constant), and resonator dimensions between the columns and hence the name GBSC. The design of the GBSC is backed by the results of acoustic beamforming experiments conducted over the uniform SCs of hollow scatterers and Helmholtz resonators (HRs) having two-dimensional (2D) periodicity prepared by using Polyvinyl chloride (PVC) pipes without any property gradient and their respective 2D finite element (FE) studies. The experimental and FE simulation results of the uniform SCs were found to be in good agreement and therefore, the GBSC was modeled and analyzed using FE method considering the viscothermal losses inside the resonators. The results indicated that the property gradient improves both Bragg scattering and Helmholtz resonance compared to that of the uniform SCs and therefore, the GBSC exhibits wider attenuation gaps and higher attenuation levels. An array of 30 microphones was used to conduct acoustic beamforming experiments on the uniform SCs. Beamforming was found to be an advanced and fast method to perform quick measurements on the SCs.